ARM DS-5 Using the Debug Hardware Configuration Utilities
ARM DS-5 Using the Debug Hardware Configuration Utilities
ARM DS-5 Using the Debug Hardware Configuration Utilities
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Troubleshooting your debug hardware unit10.2 USB server not accessibleThe following error message is displayed if a communication error occurs between <strong>the</strong> <strong>Debug</strong><strong>Hardware</strong> Config utility and <strong>the</strong> USB server application:The USB server might not be accessible because:Figure 10-2 Error message when no USB devices present• The USB driver did not load. In this case you might have to reinstall <strong>the</strong> host software.• The USB server application has stopped working. In this case, kill <strong>the</strong> USB server processand restart <strong>the</strong> <strong>Debug</strong> <strong>Hardware</strong> Config utility.NoteIf you do not want to use a USB connection, <strong>the</strong>n use <strong>the</strong> debug hardware unit over a TCP/IPconnection. If you have not yet done so:1. Connect <strong>the</strong> unit to your network.2. Configure <strong>the</strong> network settings for <strong>the</strong> unit.10.2.1 See alsoTasks• Determining <strong>the</strong> correct network settings on page 3-3• Configuring <strong>the</strong> network settings for a debug hardware unit on page 3-8.Concepts• About configuring network settings on page 3-2• Multiple programs attempting to scan on page 10-2• Connection times out on page 10-4• O<strong>the</strong>r active connections on page 10-5.<strong>ARM</strong> DUI 0498F Copyright © 2010-2012 <strong>ARM</strong>. All rights reserved. 10-3ID021112Non-Confidential
Change language