ARM DS-5 Using the Debug Hardware Configuration Utilities

Configuring debug hardware for GDB9.18 Loading and booting a complete systemYou can load and boot a complete system at a command-line without having to run GDB or asupported debugger to control the debug hardware unit.To load and boot a complete system at the command-line use the following commands:• rviload• RVIahbload• RVIvec.9.18.1 See alsoTasks• Preparing your debug hardware for remote GDB connections on page 9-21.Concepts• About configuring debug hardware for debugging with GDB on page 9-3• Methods of connecting from remote GDB sessions on page 9-9• Multiprocessor debugging with GDB and debug hardware on page 9-34.Reference• rviload command syntax on page 9-28• RVIahbload command syntax on page 9-30• RVIvec command syntax on page 9-32.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 9-26ID021112Non-Confidential