ARM DS-5 Using the Debug Hardware Configuration Utilities

Configuring debug hardware for GDB• debug hardware acts as a network bridge between the target processor and the host PCusing a virtual Ethernet link. The target must have its own IP address that is either fixedor obtained from a DHCP server, and that appears on the virtual Ethernet as anindependent host.9.11.3 See alsoTasks• Connections to a target without built-in GDB support (RVI-GDB) on page 9-11• Connections to a target with a GDB stub (Target-GDB) on page 9-13• Connections to a target OS using gdbserver (GDBserver) on page 9-17• Connections to a target OS using NFS (GDB-NFS) on page 9-19.Concepts• Connection methods for each debugging mode on page 9-10• Setting DCC parameters on page 9-23.Other information• ARM downloads, http://www.arm.com/productsARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 9-16ID021112Non-Confidential