ARM DS-5 Using the Debug Hardware Configuration Utilities

Configuring CoreSight systemsName=TPIU;Type=CSTPIU;Port0=ETM;This line specifies that a CoreSight TPIU is accessible using the precedingARMCS-DP.Port0=ETM indicates that the source of trace that is stored in this ETB is thecomponent named ETM11.NoteAlthough the funnel is located between the trace sources and trace sinks, it is not necessary toinclude it in the Association mapping. The funnel can be used to control the flow of tracethrough the system dynamically. The purpose of the Association file is to describe a static viewof the trace flow through the system.6.11.1 See alsoConcepts• Setting up a CoreSight trace association file on page 6-11• About trace associations on page 6-6• Defining CoreSight trace associations on page 6-7• CoreSight topology and associations for the Cortex-R4 FPGA on page 6-17• CoreSight topology and associations for the Cortex-M3 FPGA on page 6-19• CoreSight topology and associations for multiple trace sources on page 6-21.Reference• CoreSight device names and classes on page 5-52• Format of trace associations on page 6-8• Trace Association Editor dialog box on page 6-9.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 6-16ID021112Non-Confidential