ARM DS-5 Using the Debug Hardware Configuration Utilities

Configuring CoreSight systems• To delete a single association, select the association and click Delete.You are not asked to confirm the deletion.• To delete all the associations in the system, click Delete All.You are not asked to confirm the deletion.9. Save your trace associations file:a. Click Save... to display the Save RealView Associations File... dialog box.b. Locate the directory where you want to save the file.c. Click Save.You might want to save a Trace Association file if you want to provide the associationswith other users using a similar development platform.10. Click OK to return to the Debug Hardware Config utility main window.An asterisk in a device box of the schematic diagram indicates that the device is associatedwith another device. The following figure shows that the CSETM and the Cortex-A8devices have associations:Figure 6-6 Devices with associations6.9.1 See alsoTasks• Starting the debug hardware configuration utilities on page 2-3• Loading a trace association file on page 6-13• Reading the CoreSight ROM table on page 6-3• CoreSight autodetection on page 6-4.Concepts• About CoreSight system configuration on page 6-2• How the debug hardware unit autodetects Serial Wire Debug on page 6-5• About trace associations on page 6-6.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 6-12ID021112Non-Confidential