INSTALLATION MANUAL RC-2B RC-3B RC-4B RC-5B RC ... - Maxon
INSTALLATION MANUAL RC-2B RC-3B RC-4B RC-5B RC ... - Maxon INSTALLATION MANUAL RC-2B RC-3B RC-4B RC-5B RC ... - Maxon
CART STOP & DUAL CART STOP RAMP INSTALLATION1. With the platform on the ground, center the Cart Stop Ramp against thebutt end of the platform. Rest the Ramp Blocks on top of the platform and letthe Ramp Tip touch the ground. Weld both sides into place.Cart Stop RampRamp BlocksCart Stop Ramp Tip to be flushwith bottom surface of Platform.Platform1/4” Weld2. Pop open the Cart Stop Section of the ramp for ease of welding. Weld thetop & bottom of the Ramp to the Platform with 2” long welds on approximately12” centers. Grind all welds smooth and touch up with paint.Cart Stop RampNOTE: REPEAT THESTITCH WELD ON THEBOTTOM OF RAMP11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-77131/4” 2”-12”Platform38
HINGED RAMP INSTALLATION (STEEL)7/8”1/8”6,748Typ.Typ.1/8”1/8”11/16”(Typ.)1251/8”Typ.C L12”43-1/4”(Typ. 90” Ramp)38-1/4”(Typ. 80” Ramp)6”1/8”46”(Typ. 90” Ramp)41”(Typ. 80” Ramp)8 81/2”(Typ.)1-7/8”12” & 20” RAMPS 6” RAMPS34 21/8”17” (12” & 20” ramps)3” (6” ramp only)41/2”11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713 39
- Page 1 and 2: M-90-1REV. HOCTOBER 2012INSTALLATIO
- Page 3 and 4: Comply with the following WARNINGS
- Page 5 and 6: UNIT AS SHIPPEDDo not remove stands
- Page 7 and 8: INSTALLATION OF UNIT - ContinuedCor
- Page 9 and 10: INSTALLATION OF UNIT - ContinuedTyp
- Page 11 and 12: WELDING TO FLATBEDThe column assemb
- Page 13 and 14: ATTACH OPTIONAL BATTERY BOX & FRAME
- Page 15 and 16: ATTACH OPTIONAL BATTERY BOX & FRAME
- Page 17 and 18: ATTACH OPTIONAL BATTERY BOX & FRAME
- Page 19 and 20: POWER PACK INSTALLATIONTRUCK BODIES
- Page 21 and 22: POWER PACK INSTALLATION - Continued
- Page 23 and 24: PUMP WIRING CAM CLOSERTOGGLESWITCH1
- Page 25 and 26: ADD HYDRAULIC FLUIDCAUTIONKeep dirt
- Page 27 and 28: FINAL ADJUSTMENTSFill the system wi
- Page 29 and 30: ATTACH DECALSNOTE: Ensure there is
- Page 31 and 32: OPTIONSRCT LIGHT INSTALLATIONALL RC
- Page 33 and 34: OPTIONSHAND PUMP OPTION FOR CAM CLO
- Page 35 and 36: RECOMMENDED LIFTGATE POWER CONFIGUR
- Page 37: FIXED RAMP INSTALLATION, 12”Lower
CART STOP & DUAL CART STOP RAMP <strong>INSTALLATION</strong>1. With the platform on the ground, center the Cart Stop Ramp against thebutt end of the platform. Rest the Ramp Blocks on top of the platform and letthe Ramp Tip touch the ground. Weld both sides into place.Cart Stop RampRamp BlocksCart Stop Ramp Tip to be flushwith bottom surface of Platform.Platform1/4” Weld2. Pop open the Cart Stop Section of the ramp for ease of welding. Weld thetop & bottom of the Ramp to the Platform with 2” long welds on approximately12” centers. Grind all welds smooth and touch up with paint.Cart Stop RampNOTE: REPEAT THESTITCH WELD ON THEBOTTOM OF RAMP11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-77131/4” 2”-12”Platform38