INSTALLATION MANUAL RC-2B RC-3B RC-4B RC-5B RC ... - Maxon
INSTALLATION MANUAL RC-2B RC-3B RC-4B RC-5B RC ... - Maxon INSTALLATION MANUAL RC-2B RC-3B RC-4B RC-5B RC ... - Maxon
ADD HYDRAULIC FLUID - ContinuedRECOMMENDEDBRANDSAMSOILISO 32 HYDRAULIC OILTABLE 26-1PART NUMBERAWH-05CHEVRON HIPERSYN 32KENDALLSHELLGOLDEN MVTELLUS S2 V32EXXON UNIVIS N-32MOBILDTE-13M, DTE-24,HYDRAULIC OIL-13ISO 15 OR MIL-H-5606 HYDRAULIC OILRECOMMENDEDBRANDSPART NUMBERAMSOILAWF-05CHEVRONFLUID A, AW-MV-15KENDALLGLACIAL BLUSHELLTELLUS S2 V15EXXONUNIVIS HVI-13MOBILDTE-11MROSEMEAD THS FLUID 1711111921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713TABLE 26-226
FINAL ADJUSTMENTSFill the system with fluid by activating the raise control switch until the runnershit the stops.Unlatch Chain beforeactivating liftgate.Slide Blockmust be inits retractedposition.Remove platform holding chain and activateswitch to let unit down until platform rests onground.11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713Weld 2” long fi llets along threshold/fl oorabout every 8 to 10 inches. No weldingis necessary on the bottom.27
- Page 1 and 2: M-90-1REV. HOCTOBER 2012INSTALLATIO
- Page 3 and 4: Comply with the following WARNINGS
- Page 5 and 6: UNIT AS SHIPPEDDo not remove stands
- Page 7 and 8: INSTALLATION OF UNIT - ContinuedCor
- Page 9 and 10: INSTALLATION OF UNIT - ContinuedTyp
- Page 11 and 12: WELDING TO FLATBEDThe column assemb
- Page 13 and 14: ATTACH OPTIONAL BATTERY BOX & FRAME
- Page 15 and 16: ATTACH OPTIONAL BATTERY BOX & FRAME
- Page 17 and 18: ATTACH OPTIONAL BATTERY BOX & FRAME
- Page 19 and 20: POWER PACK INSTALLATIONTRUCK BODIES
- Page 21 and 22: POWER PACK INSTALLATION - Continued
- Page 23 and 24: PUMP WIRING CAM CLOSERTOGGLESWITCH1
- Page 25: ADD HYDRAULIC FLUIDCAUTIONKeep dirt
- Page 29 and 30: ATTACH DECALSNOTE: Ensure there is
- Page 31 and 32: OPTIONSRCT LIGHT INSTALLATIONALL RC
- Page 33 and 34: OPTIONSHAND PUMP OPTION FOR CAM CLO
- Page 35 and 36: RECOMMENDED LIFTGATE POWER CONFIGUR
- Page 37 and 38: FIXED RAMP INSTALLATION, 12”Lower
- Page 39 and 40: HINGED RAMP INSTALLATION (STEEL)7/8
FINAL ADJUSTMENTSFill the system with fluid by activating the raise control switch until the runnershit the stops.Unlatch Chain beforeactivating liftgate.Slide Blockmust be inits retractedposition.Remove platform holding chain and activateswitch to let unit down until platform rests onground.11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713Weld 2” long fi llets along threshold/fl oorabout every 8 to 10 inches. No weldingis necessary on the bottom.27
Change language