Axial Piston Fixed Displacment Motor AA2FM (A2FM) - Group VH A/S

RA 91 001/07.05 AA2FM Bosch Rexroth Corp. 3/36Ordering Code / Standard Program (ordering code size 5 see page 10)M / 6 W – V01 02 03 04 05 06 07 08 09 10 11 12 13 14Mounting flange 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180 250SAE Version2-bolt – SAE – – – – – – – – – – – – – C(AA2F)4-bolt – SAE – – – – – D11ISO Version(A2F)– – – – – – – – – – – – – – DN200 355 500 710 10004-bolt – ISO – – – – B8-bolt – ISO – HService line portsAA2F 1 ) 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180 250SAE flange ports A and B, rear 51 0 – – – 51012SAE flange ports A and B,at side, opposite sideThreaded ports A and B,at side, opposite sideThreaded ports A and B,at side and rear 2 )SAE flange ports A and B,bottom 2 )Port plate for fitting a counterbalancevalves 3 )Port plate with integrated pressurerelief valve 3 )52 0 – – – 5207 – – – – – – 527530 – – – – – – – – – – 530540 – – – – – – – – – – – – – 540600 – – – – – – – – – – – – – – 600181 – – – – – 18119 1 – – – – – 1912 – – – – – 192A2F 3 ) 200 355 500 710 1000SAE flange ports A and B, rear 01 0 0107 – m m 017SAE flange ports A and B, bottom 10 0 – – – – 100ValvesWithout valve 0With pressure relief valves (without pressure sequence range) 1With pressure relief valves (with pressure sequence range) 2With flushing and boost pressure valve 7Speed measurement 10...16 23...180 200 250 355...1000Without speed measurement (no code)13 Prepared for speed measurement with ID sensor 4 ) – – – – DPrepared for speed measurement with HDD sensor 4 ) – – 5 ) m FSpecial designStandard version (no code)14Specific version for slew drive applications (standard for port plate 19)J1 ) threads of fastening screws and service lines are SAE (UN/UNF)2 ) threaded ports at side are plugged with locking screw3 ) threads of fastening screws are metric4 ) complete order recommended (AA2FM inc. speed sensor)5 ) see RE 91001 (ISO-Version)= available m = in preparation (on request) – = not available