Axial Piston Fixed Displacment Motor AA2FM (A2FM) - Group VH A/S

–0.08928/36 Bosch Rexroth Corp. AA2FM RA 91 001/07.05Unit Dimensions, Size 710 – ISO DesignPort plate 01: SAE flange ports, rearDIA 15.748DIA 15.745(DIA 400 )Please request a certified installation drawingbefore finalizing your design.Dimensions in inches and (millimeters)1.97 (50) 5.16 (131)0.55 (14) 1.63 (41.5)18.31 (465)UT1MA (MB)YT 21.85 1.38 (35)(47) 6.14Detail Y(156) 19.13 (486)1.75 1.7519.96 (507)(44.5)(44.5)Flange ISO 3019-2BA MAMB7.21 7.21(183) (183)18°30’4.02(102)9.92(252)45°0.87(22)22°30’DIA 19.69(DIA 500)DIA 17.72(DIA 450)3.8118.31(236)(465)9.29(96.8)(340)13.391.97(50)3.35 3.35(85) (85)13.54 (344)1.97(50)Shaft endsZ Splined shaft DIN 5480W90x3x30x28x9gp N = 5100 psi (350 bar)M24x3 1 ) 2 )1.97 (50)0.71(18)0.55 (14)4.13 (105)DIA 3.94(DIA 100)PParallel keyed shaftDIN 6885 – AS25x14x125 (mm)p N = 5100 psi (350 bar)0.98430.9822(25 h9 )0.55 (14)3.74 (95)DIA 3.5447DIA 3.5438M24x3 1 ) 2 ) (DIA 90 +0.035+0.013 )1.97 (50)0.71(18)R0.06(R1.6)5.12 (130)DIA 3.94(DIA 100)PortsA, B Service line ports (high pressure series) SAE J518 2 inFastening threads DIN 13 M20x2.5; 1.18 (30) deep 2 )T 1 , T 2 Case drain ports (T 2 plugged) DIN 3852 M42x2; 0.79 (20) deep 530 lb-ft (720 Nm) 2 )U Port for bearing flushing (plugged) DIN 3852 M18x1.5; 0.47 (12) deep 100 lb-ft (140 Nm) 2 )M A , M B Measuring ports operating pressure (plugged) DIN 3852 M14x1.5; 0.47 (12) deep 60 lb-ft (80 Nm) 2 )1 ) centering bore according to DIN 332 (thread according to DIN 13)2 ) please observe the general notes for the max. tightening torques on page 36