Axial Piston Fixed Displacment Motor AA2FM (A2FM) - Group VH A/S

–0.081RA 91 001/07.05 AA2FM Bosch Rexroth Corp. 27/36Unit Dimensions, Size 500 – ISO DesignPort plate 01: SAE flange ports, rearDIA 12.402DIA 12.398DIA 315 )1.97 (50) 3.86 (98)0.55 (14) 1.08 (27.5)UT1MA (MB)5.59(142)5.59(142)26°30’4.43(112.5)45°0.87(22)22°30’DIA 15.75(DIA 400)Please request a certified installation drawingbefore finalizing your design.Dimensions in inches and (millimeters)14.76 (375)DIA 14.17(DIA 360)(192)(375)7.5614.761.89(48)Flange ISO 3019-2T 21.18 (30)4.37(111) 14.23 (361.5)15.59 (396)8.66(220)YDetail Y1.44 1.44(36.6) (36.6)BAMBMA3.13(79,4)10.63 (270)1.581.58(40) 2.56 2.56 (40)(65) (65)10.87 (276)Shaft endsZ Splined shaft DIN 5480W70x3x30x22x9gp N = 5100 psi (350 bar)M20x2.5 1 ) 2 )1.65 (42)0.59 (15)0.51 (13)3.15 (80)DIA 3.15(DIA 80)PParallel keyed shaftDIN 6885 – AS20x12x100 (mm)p N = 5100 psi (350 bar)0.78740.7854(20 h9 )0.47(12)(74.5)2.93DIA 2.7570DIA 2.7563+0.030(DIA 70 +0.011 )M20x2.5 1 ) 2 )1.65(42)0.59 (15)R0.06(R1.6)4.13 (105)DIA 3.15(DIA 80)PortsA, B Service line ports (high pressure series) SAE J518 1 1/2 inFastening threads DIN 13 M16x2; 0.83 (21) deep 2 )T 1 , T 2 Case drain ports (T 2 plugged) DIN 3852 M33x2; 0.71 (18) deep 400 lb-ft (540 Nm) 2 )U Port for bearing flushing (plugged) DIN 3852 M18x1.5; 0.47 (12) deep 100 lb-ft (140 Nm) 2 )M A , M B Measuring ports operating pressure (plugged) DIN 3852 M14x1.5; 0.47 (12) deep 60 lb-ft (80 Nm) 2 )1) centering bore according to DIN 332 (thread according to DIN 13)2) please observe the general notes for the max. tightening torques on page 36