Axial Piston Fixed Displacment Motor AA2FM (A2FM) - Group VH A/S

7.80(198)5.04(128)4.02(102)–0.0815.04(128)26/36 Bosch Rexroth Corp. AA2FM RA 91 001/07.05Unit Dimensions, Size 355 – ISO DesignPort plate 01: SAE flange ports, rear1.97 (50)3.27 (83)0.55 (14) 0.93 (23.5)UT1MA (MB)45°13.1922°30’Please request a certified installation drawingbefore finalizing your design.Dimensions in inches and (millimeters)(335)(170)DIA 11.024DIA 11.020(DIA 280 )26 °30’0.71(18)DIA 14.17(DIA 360)DIA 12.60(DIA 320)13.19(335)6.7FlangeISO 3019-21.89(48)Port plate 10:SAE flange ports, bottom14.59 (370.5)12.72 (323)1.10 (28) T23.2 7(83) 12.60 (320)13.78 (350)Detail Y1.25(31.8)BYDetail Y1.44 1.44(36.6) (36.6)BAMBMA3.13(79.4)9.65 (245)Y5.83 (148)7.84 (199)9.49 (241)4.72 (120)M BM A2.63(66.7)1.26(32)A1.58(40)2.36 2.36(60) (60)9.84 (250)1.58(40)Shaft endsZ Splined shaft DIN 5480W60x2x30x28x9gp N = 5100 psi (350 bar)M20x2.5 1 ) 2 )1.65 (42)0.59 (15)0.43 (11)3.23 (82)DIA 2.76(DIA 70)PParallel keyed shaftDIN 6885 – AS18x11x100 (mm)p N = 5100 psi (350 bar)0.70870.7070(18 h9 )0.43 (11)2.52 (64)DIA 2.363DIA 2.362(DIA 60 +0.030+0.011 M20x2.5 1 ) 2 ))1.65 (42)0.59 (15)R0.06(R1.6)4.13 (105)DIA 2.76(DIA 70)PortsPort plate 01: Port plate 10:A, B Service line ports (high pressure series) SAE J518 1 1/2 in 1 1/4 inFastening threads DIN 13 M16x2;0.83 (21) deep 2 ) M14x2; 0.87 (22) deep 2 )T 1 , T 2 Case drain ports (T 2 plugged) DIN 3852 M33x2; 0.71 (18) deep 400 lb-ft (540 Nm) 2 )U Port for bearing flushing (plugged) DIN 3852 M14x1.5; 0.47 (12) deep 60 lb-ft (80 Nm) 2 )M A , M B Measuring ports operating pressure (plugged) DIN 3852 M14x1.5; 0.47 (12) deep 60 lb-ft (80 Nm) 2 )1 ) centering bore according to DIN 332 (thread according to DIN 13)2 ) please observe the general notes for the max. tightening torques on page 36