Axial Piston Fixed Displacment Motor AA2FM (A2FM) - Group VH A/S

24/36 Bosch Rexroth Corp. AA2FM RA 91 001/07.05Unit Dimensions, Size 200 – ISO DesignPort plate 01: SAE flange ports, rearPlease request a certified installation drawingbefore finalizing your design.Dimensions in inches and (millimeters)°6.14 (156)1.58 4.09 (104)0.35(40)1.26(9) (32)T 1459.29(236)45°DIA 7.874DIA 7.872(DIA 200–0.029)1.26(32)25°4.04(102.5)3.50(89)Flange ISO 3019-2T 211.81 (284)12.05 (306)3.03(77)3.31(84)Y6.54(166)0.87(22)ADetail YB9.84(250)8.11 (206)2.63 2.63(66.7) (66.7)A(236)9.29B8.31(211)1.25(31.8)1.26(32)3.90(99)Shaft endsA Splined shaft DIN 5480W50x2x30x24x9gp N = 5800 psi (400 bar)B Parallel keyed shaftDIN 6885 – AS14x9x80 (mm)p N = 5100 psi (350 bar)M16 1 ) 2 )1.42 (36)0.47 (12)0.43 (11)2.17 (55)DIA 2.76(DIA 70)0.55120.5495(14 h9 )0.35 (9)DIA 1.969DIA 1.968(DIA 50 +0.018+0.002 )2.11(53.5)M16x2 1 ) 2 )1.42 (36)0.47(12)3.94R0.06(R1.6)(100)DIA 2.76(DIA 70)PortsA, B Service line ports (high pressure series) SAE J518 1 1/4 inFastening threads DIN 13 M14x2; 0.75 (19) deep 2 )T 1 , T 2 Case drain ports (T 1 plugged) DIN 3852 M22x1.5; 0.55 (14) deep 155 lb-ft (210 Nm) 2 )1 ) centering bore according to DIN 332 (thread according to DIN 13)2 ) please observe the general notes for the max. tightening torques on page 36