Axial Piston Fixed Displacment Motor AA2FM (A2FM) - Group VH A/S

16/36 Bosch Rexroth Corp. AA2FM RA 91 001/07.05Unit Dimensions, Sizes 56, 63 – SAE DesignPlease request a certified installation drawingbefore finalizing your design.Dimensions in inches and (millimeters)5.63(143)45°45°0.50 (12.7)0.31 (7.9)0.79 (20)5.75(146)T 1DIA 5.000DIA 4.998(DIA 127 -0.05 )2.83(72)40°1.30(33)0.56(14.3)DIA 6.38(DIA 182)5.75(146)Flange SAE J7442.91(74)T 2DIA 5.04(DIA 128)Shaft endsS Splined shaft 1 1/4 in 14T 12/24 DP 1 )(SAE J744 – 32-4 (C))p N = 5100 psi (350 bar)T Splined shaft 1 3/8 in 21T 16/32 DP 1 )p N = 5800 psi (400 bar)B Parallel keyed shaftDIN 6885 – AS10x8x50 (mm)p N = 5100 psi (350 bar)7/16-14 UNC-2B 2 ) 4 )1.10 (28)0.37 (9.5)0.31(8)1.89 (48)DIA 1.57(DIA 40)7/16-14 UNC-2B 2 ) 4 )1.10(28)0.37 (9.5)0.31 (8)1.89 (48)DIA 1.57(DIA 40)0.39370.3923(10 h9 )0.31(8)DIA 1.379DIA 1.378+0.018(DIA 35 +0.002 )1.50 (38)M12x1.75 3 ) 4 )1.10(28)0.37 (9.5)2.36(60)E1x0.2DIN 509DIA 1.57(DIA 40)PortsA, B Service line ports (see port plates)T 1 , T 2 Case drain ports (T 2 plugged) ISO 11926 3/4 in -16 UNF-2B; 0.59 (15) deep 120 lb-ft (160 Nm) 4 )1 ) 30° pressure angle, flat root side fit, tolerance class 52) thread according to ISO 683 ) centering bore according to DIN 332 (thread according to DIN 13)4 ) please observe the general notes for the max. tightening torques on page 36