Actassi catalogue - Schneider Electric

Actassi fibre optic cablesActassi Fibre LAN range is adapted to the familiar ways of installing optic connectorsand pigtails (SC, LC, ST). The range is available under 2 different structures: Tightbuffered and Loose tube to be used for direct connector termination and for splicingrespectively. Both structures are suitable for indoor and specific outdoor installations.Loose tubeTight buffered6752423318181Robust sheathTensile strengthReinforces the tensilestrength of the cable.RobustnessHigh maximum pulling forceand crush resistance of thecable during installation.UV resistanceResistance to UVdegregation.ColoursDistinct colours to identifystrategic cables and preventmistakenly cutting the cable.2 Water swellableelementsProvide a protective barrieragainst longitudinallywater ingression whileguaranteeing cableperfomance.3 100% glass yarnsReinforcing the tensilestrength of the cable. Actingas rodent retardant.4 Innovative designInnovative design of dualloose tube structure tohelp simplify the installation.5 GelProvides a protective barrieragainst longitudinall wateringression while guaranteeingcable perfomance.Coating250 µm coating678900 µm coatingCompact for improvedbending radiusThe compact design ofthe cables gives severalbenefits:• Reduced bending radii:10 x diameter for Tightbuffered and 60 mm forLoose tube cables• Reduced diameter andincreased installationspacePackagingPackagingadapted to ourcustomers requests (convenientsmall sized drumsor cut to length).Colour codeFibre n°1 to n°12 according to the following colours.1 Blue2 Orange3 Green4 Brown5 Grey6 White7 Red8 Black9 Yellow10 Violet11 Rose12 AquaFibre n°13 to n°24: idem + transparent60 | Actassi Network Connectivity Jan 2013