Actassi catalogue - Schneider Electric

Actassi EnclosuresVDA/VDSEA accessoriesRoof and base accessoriesInstallation supportsPlain blanking plate (J1) (K1)■■Fixing on the internal surface of the base or roof.■■Can be combined with other types of blanking plates.■■Treated sheet steel.■■Delivered with the fixings required for installation.NSYEC440ReferenceNSYEC440Blanking plate with brush gasket (J2) (K2) (L1)■■Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of thereduced rear door.■■Can be combined with other types of blanking plates.■■Treated sheet steel.■■Delivered with the fixings required for installation.NSYECP440Dimensions (mm)Reference75 x 400 mm NSYECP440NSYECVT2V440Blanking plates with or without fansØ 120 mm (J3) (J4) (L2) (L3)■■Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of thereduced rear door.■■Equipped with 2 fans, free flow of 170 m 3 /h each, 220 V-50/60 Hz, installedwired with terminal board. A 3-m power cord is supplied, installed.■■Can be combined with other types of blanking plates.■■Treated sheet steel.■■Delivered with the fixings required for installation.■■Noise level: 34 dB (A).■■To use fans with UK PDU’s, order UK adaptor Ref : NSYAPUFRUKWith 2 fansDimensions (mm)ReferenceNSYECVT2V440Additional 19" uprights■■Assembly on the depthwise supports.■■Depth adjustable in steps of 25 mm.■■Kit made up of 2 uprights and the fixings required for assembly.■■9.5-mm square holes in the front panel.Number of U24U42UReferenceNSYBR9F24NSYBR9F42NSYECVT2V424 /NSYECVT2V440Network Connectivity Jan 2013Actassi | 107