Actassi catalogue - Schneider Electric

Actassi EnclosuresVDA/VDSAccessoriesEA accessoriesLocking system (P1)■■Allows the closure of a side panel and the rear panel.■■Lock with key n° 333 with escutcheon plate.■■It is installed on the opening latches of the side and rear panels.■■Delivery of 2 locks per panel.NSYSTVDAReferenceNSYSTVDACoupling kit (R1)■■Kit to be used when coupling two racks side by side.■■Kit made up of 4 flanges and the fixings required for assembly.ReferenceNSYCUNVDANSYCUNVDAVertical trim strips with cable entries (H2)■■For enclosures with a width of 800 mm only.■■Side cut-outs allowing the entry of cables every 250 mm. Knock-out entries on thefront plate every 250 mm.■■Assembly on the framework uprights providing aesthetic continuity between theframework and the 19" uprights positioned at least 100 mm away from the door.■■RAL 7011 dark grey paint.■■Cable-protection strips (not supplied) to be ordered separately. Seepage XX.■■Dismounting by 1/4-turn screws.■■Kit made up of 2 trim strips.Number of U42UReferenceNSYPV42NSYPV42Handling wheels (M3)■■Batch of 4 swivel castors, 2 of which are equipped with a locking system.■■Direct fixing under the bottom frame of the rack by M12 screws.■■Height of the castors: 105 mm.Acceptable loadReference250 kg/4 castors NSYRUFVDANSYRUFVDA106 | Actassi Network Connectivity Jan 2013