Actassi catalogue - Schneider Electric

Network ConnectivityThe Actassi systemSeamless end-to-end network connectivity

Actassi puts all thedifferences aside!The best featuresof our local brandsand ranges are nowmerged into one,complete globalsystem – Actassi.2

ContentsThe Actassi system..................................................................... 4Actassi 19" Panels................................................................... 1419-C Copper panels..........................................................................................2219-C Cable management and Accessories...............................................25Actassi Copper solution ............................................. 28Copper connectors ............................................................................................30Copper Cables...................................................................................................... 37Copper Patch Cords...........................................................................................50Actassi Fibre solution ........................................................ 54FL-C Fibre Optic Cables....................................................................................60FL-C Fibre Optic Patch cords..........................................................................66FL-C Fibre Optic Connectors..........................................................................69FL-C Fibre Optic Pigtails................................................................................... 7019-C Fibre Optic Panels, Adapters and Accessories..............................71Actassi 19-E Enclosures................................................ 76Actassi wall-mounted enclosuresKDB flat pack OpenBox enclosure.........................................................83OPB 19" OpenBox enclosure...................................................................89Actassi floor-standing enclosuresBTR 19" Technical rack..............................................................................98VDA 19" Cabling enclosures....................................................................99Data Center Patching Frame................................................................. 102VDS 19" Server enclosure...................................................................... 103Actassi 19-E Universal Accessories........................................................... 106Earth connection....................................................................................... 108Fixing components................................................................................... 108Shelves ......................................................................................................... 109Cable management ................................................................................. 110P & S 19" Customisation service................................................................ 113Technical info .................................................................................................... 114Network Connectivity Jan 2013 Actassi | 3

P1262804 | Actassi Network Connectivity Jan 2013

Superior usabilityBy constructing a complete system, we have made sure that there will never beincompatible differences in-between parts. But as an installer, we believe youwould like to know the specifics. Let’s take a closer look at some less visible Actassiadvantages!The new Actassi CL-MXcable has a patentedmetallic crossfiller forbetter link performanceand less installationoperations. No need ofseparation distance topower cabling and noneed of ANEXT fieldtesting.The high-performanceCL-MX cableA new and innovative shieldedCat 6 A cable with 3 times fasterinstallation and a superior transferimpedance performance. Thesecret is the patented single-foilmetallic crossfiller that brings 3xshielding, improved EMC and lesscutting operations.The pre-equipped19" panelsThe Actassi 19" patch panelswith sliding and quick-fixfunction, automatic earthing,quick-release button and rearcable identification will delightany professional.Actassi VDS allowsairflow of 80%The new Actassi enclosurefor server applications is veryrobust and can be mountedwith up to 750 kg of 19"components. The microperforateddoor ensuressuperior air circulation. Cableentries at the sides enableergonomic installations.6 | Actassi Network Connectivity Jan 2013

Actassi helps you getmore jobs done byspeeding up each task.P126926Network Connectivity Jan 2013 Actassi | 7

Install seamlessend-to-end connectivityActassi includes everything needed to install and operate networkconnections simply and intuitively. Technical innovationsand ergonomic features exceeding the demands of end-usersand installers, enhance productivity in every workplace.Actassi is easy tospecify, install, use andupgrade. Together withour OptiLine installationsystem you will have avery flexible networkaccess.Actassi 19" EnclosuresA complete range of products including allsizes of enclosures, from 6 units to 47 unitswith different widths, depths and compositions.Quick FixOur 19" panels are allequipped with the QuickFix function, allowingsimple, firm andconvenient installationand maintenance.Actassi 19" PanelsSliding function, automatic earthing, quick-releasebutton and rear cable identification make theActassi 19" panel a delight to install.CL-MX cableThe new Actassi CL-MXcable has a patentedmetallic crossfiller whichbrings 3x shielding andsuperior EMC. Still it's3 times faster to install!Actassi S-One – Twice as fastThe new Actassi RJ45 connector, with features likethe smart bridle, is up to 50% faster to connectthan most other connectors.8 | Actassi Network Connectivity Jan 2013

Cable management for perfectionistsEvery cord and cable is easily fixed and fastened in itsdesignated place.Clear markingBoth patch panels and connector face plates areequipped with a system for clear marking.Expand in no timeThe patch panels are pre-equipped and havebenefits such as the Quick Fix and a convenientsliding function.Network Connectivity Jan 2013 Actassi | 9

Complete peace of mindDid you connect the right wire? Did you remember earthing? With Actassi you neverhave to worry again. The shielded connectors have an automatic 360° earthing, soyou will save time and provide safe installations simultaneously. But security isn’t onlya built-in feature in products. It’s also a philosophy that has governed the way we havedesigned the Actassi support services and warranties.We offer comprehensivetraining programmesas well as extensivewarranties.You will get it right, intuitivelyActassi system warrantycovers the completenetwork, from thetechnical room to theworkstation. Ask yourlocal Schneider Electricsales office for detailedinformation on thewarranties and supportresources inyour country.Actassi is built on intuitive installation technology,making it very hard to fail. But if there are anyuncertainties, don’t hesitate to call your localsupport services.They are happy to answer yourquestions. And if there is something you would liketo excel at, you are always welcome to join ourtraining programmes.Certified standard and global accessibilityAll Actassi products are certified to the higheststandards by a third party. Several productsactually exceed international standards to giveyou true top-class performance and reliableconnectivity. Our worldwide presence and wellknowndistribution partners also ensure bothglobal and local access to our products andservices.The Digital Rulehelps you selectproductsDo you find it hard to select RJ45 connectors,patch panels, cables and enclosures? Visitschneider-electric.com and try our Digital Rule. It’san intelligent online e-catalogue which will facilitateyour choices and ensure an error-freespecification.10 | Actassi Network Connectivity Jan 2013

Environment in focusEnergetic and environmental responsibility lies at the core of Schneider Electric cultureand strategy. We strive to reduce the environmental impact of our products throughouttheir entire life-cycle, particularly through eco-design and eco-production.Actassi is compliantwith RoHS, the REACHEuropean directives andPEP Eco passport.Product EnvironmentalProfile available on request.Eco-designActassi CL-MX cablesis one example of Ecodesign.Halogen-free,flame or fire retardant.In case of fire, the resultof using Actassi CL-MXis the reduction of theemissions of opaquesmoke and acid gases.Thus, it helps reducingdamages to equipmentand allows people toescape from the buildingmore easily.The European Union enacted an Energy usingProducts (EuP) framework directive in 2005(directive on the eco-design of products) whichseeks to promote eco-design approaches inpriority sectors, or even to specify the aims ofimpacts for some products.Although Schneider Electric’s supply is outsideof the EuP target, it generalises the eco-designapproach to all its developmental activities andundertakes to communicate the environmentalfeatures of its products through ProductEnvironmental Profiles (PEPs)Product Environmental ProfileFor each product Schneider Electric undertakesto publish a Product Environmental Profile (PEP).It provides customers with information on theirenvironmental performances during their life cycleas well as the best treatment solutions at the endof their life. To ensure transparency and the validityof the data, it complies with ISO 14025 in aninter-professional programme which sets sharedcalculation and drafting rules for publishing theenvironmental impacts of products.Network Connectivity Jan 2013 Actassi | 11

Choose a seamless networkActassi does far more than simply showcase technological achievement. In makingtechnology work for you, Actassi delivers true and seamless end-toend connectivity.Our target is to provide stylish and ergonomic network connections wherever youneed them, to make life easier and enhance your productivity and peace of mind.With new IP-reliant VoIP,video streaming, livefeed and surveillanceapplications emergingconstantly, ensuringoptimal speed,reliability and costeffectivenessis morevital than ever. Effectivelyfuture-proofing anyinfrastructure, Actassisolution will alwayskeep you ahead of thetechnological curve.From your datacentresActassi is designed to delight technologicallysavvyIT professionals. Combined with ourID-Tracer TM Smart Patching Solution, our "Tough"Cabling will ensure your IT teams can maximizecontrol of network connectivity systems, andgreatly simplify both network, planning andoperations.to yourworkstationsImprove ergonomics at your workstations with ourErgo-Aesthetic Terminals. Delivering convenientconnectivity, they let you start your work right awayrather than having to bend down under the deskand fumble hopelessly around for patch cords.to your meetingroomsDelight internal and external customers by creatingan organized and systematic impression of yourmeeting rooms with Actassi’s secure, reliableand easily wired network connections. Install ourErgo-Aesthetic Terminals and say “goodbye” tothe headache of tangled patch cords on andunder your conference tables.and even on theroad...When traveling out of town on business orpleasure, you are sure to be delighted with thewealth of thoughtful little Actassi details you willfind inside your hotel room. This is especially truewhen you want to get online and surf the net. WithActassi, you will never have to travel very far toexperience the ultimate blend of technology, artistryand beauty.12 | Actassi Network Connectivity Jan 2013

A short Actassi summaryHere is a short summary for you: Actassi is Schneider Electric’s new global state-of-the-artrange for networking and connectivity infrastructure solutions, created for buildings anddata centres. It consists of the best performing features from local Schneider Electricbrands such as LexCom, Infraplus, Clipsal Datacomms, Sarel and Himel. To be able tooffer every installer around the world, the best-of-the-best solutions, we have createdONE single system; Actassi.Searching for a smallersized home solution?LexCom Home shouldbe your choice. You'll getdata, TV and telephonein all rooms, and evenaccess to all medias atthe same time from thesame outlet.All products are designed to give superiorusability and performance. They exceed themost advanced international standards, such asISO/IEC 11801:2011 Ed2.2 for the new S-Oneconnector. All S-One and Blue-Link connectorsare manufactured to provide exceptional Cat 5e,Cat 6 and Cat 6 A performance for shielded andunshielded data networks.The Actassi system consists of a comprehensiveset of products:> Connectors for Cat 5e, Cat 6 andCat 6 A performance> Cross-connect panels> Copper and fibre optic LAN cables> Patch cords and connecting hardware> Cabling and server enclosuresNetwork Connectivity Jan 2013 Actassi | 13

14 | Actassi Network Connectivity Jan 2013

Actassi 19" PanelsPresentation.............................................................................................................16Range19-C Copper panels................................................................................2219-C Cable management and Accessories ....................25Network Connectivity Jan 2013 Actassi | 15

Actassi 19" patch panelsThe Actassi 19" panels are indeed an installer’s delight! They are innovative, simple andefficient. They are also part of the global Actassi product portfolio for Network Connectivityincluding connectors, cables and enclosures. Actassi is also a vital componentof TOP – the Total Office Performance system – making workspaces energy efficient,flexible and comfortable. TOP includes everything from power and data distribution, tosafety systems and lifespace controls. So, when you choose Actassi you’ll get superiorusability and a truly seamless end-to-end connectivity.16 | Actassi Network Connectivity Jan 2013

Making professional IT andnetwork installations easyNow, furnishing or main taining our 19" racks with panels couldn’t be done easier orfaster. Actassi panels are all equipped with the Quick Fix function, a mechanism mountedat each side of the 1U panel, which helps them to be quickly opened.All Actassi panels areequipped with the smartand innovative Quick Fixfunction.FibreopticDataTelecomA panel for every needWe’ve got panels for fibre optic, data and telecom.They have all been developed with two words infocus - easy and smart. Some examples; QuickFix function, sliding panels, clear marking andeasy cable management. The fibre optic panelsalso have a highly developed protection againstdust. And the best of it all, the panels are alsoavailable pre -equipped, to make your ordering andinstallation as simple as possible. Of course powerpanels are also part of our offer.Quick FixJust press the buttonand the panel smoothlyslides out. Other QuickFix secrets are theguiding fin gers and thepre -mounted screws. Theintegrated label holdergives the panel a uniqueidentity.Homogeneous designActassi is not only a highquality system, it alsolooks good! The appearanceis really professionalsince we have kept thesame aesthetics for thewhole range.Future proofAll Actassi products arepart of our modular offerfor creating a professionalIT and network environment.The robust design,construction and highqualitymaterials are otherlong-lasting guarantees.That’s why the Actassiproducts are future proof.Good overviewThe transparent front lidsand the top cover protectthe patchcords andfibres, and give a clearvisibility of the inside.Network Connectivity Jan 2013Actassi | 17

Actassi data panelsThe data panels con tain a front configuration for 24 RJ45 connectors. Most panelshave the smart Quick Fix function. They are also available pre- equipped with connectors,shutters, label holders and a rear cable organizer. We try to make your life as easy aspossible.Sliding helps installationMaintenance and extensions are smoothlyperformed with the help of the Quick Fix slid ingfunction.Actassi S-OneThe connectors are a one-piece design for very fastand reliable wiring. Actassi S-One exceeds componenthardware certification for standards like ISO/IEC 11801amendment 2:2010 for Cat 6A, ensuring optimizednetwork performance.Cable managementApart from the systemswith colour codes, labelsand numbers, the technicalsetup at the rear ofthe panel is designed toenhance order. Cablesof various diameters areeasily mounted and keptin place in specified slots.Rear position numbersKeeping track of eachRJ45 could sometimesbe very hard. Actassi ischanging all of that! Thecable numbers at therear correspond to thoseat the front, simplifyinginstallation and maintenancefrom both sides ofthe rack.Automatic earthingAn automatic earthingfor FTP/STP versions isintegrated in the panel.Clear front markingEach panel plate has anopenable label holder.Print your own labels oruse the included versionswith pre-printed portnumbers. Each shuttercan also be colour codedfor quick identification inboth open and closedpositions.18 | Actassi Network Connectivity Jan 2013

Actassi fibre optic panelsA simple all- in-one concept, pre- equipped with for example Quick Fix function, coilingwheels and cable glands. It has a capacity of 24 (SC Duplex) / 48 (LC Duplex) fibresand has transparent lids for protection and a clear visibility of the inside. Can hold upto 4 cover plates, and since it is delivered with 3 blank plates, the choice is open forthe fourth to be used according to your needs. The cover plates are available in emptyand pre- equipped versions with adapters.To match your fibre opticpanel we have developeda range of pre- equippedcover plates. It’s a time -saving, safer and smarterway to work with yourinstallations.Coiling wheelsThe panel containswheels to keep the fibresin place and to avoid tensionon the connectors.This will also give a correctbending radius andmore space for excesslengths of the fibres.Excellent protectionThe transparent coversgive both protection andoverview. The front coverscan be opened forquick access and the topcover is easily removed.Clear markingSince the marking is veryclear, identify ing the cableyou are looking for willnever be a problem.Integrated guidingpanelA patchcord guidingpanel, with smoothlyshaped edges to protectthe cords, is integrated inthe panel. So there is noneed to add a separateguiding panel that wouldtake another 1U space.Rear quick fixationA quick-fixation system isprovided for the cables atthe rear. Use the provided16 mm glands for cables.If a 21mm gland (notprovided) is needed, justremove the rear plasticsupport and fix the glanddirectly in the cable entry.Quick and easy!Sliding functionThe panel can be slidedor completely removedfor a more convenientworking position.Network Connectivity Jan 2013Actassi | 19

Actassi telecom panelsThe smart and high capacity 19" telecom patch panel provides up to 50 connections.Very easy fixation of the panel thanks to the Quick Fix function with guiding fingers andpre -mounted screws. The label holders are easily opened without using any tool.Exceptional robustnessThe sliding function does not deteriorate the stability.As a proof you can use the punch down tool for LSAcontacts with the panel in a sliding-out position. Youdon´t need to remove it from the rack first!Punch down toolThis is the punch downtool for LSA contacts,to be used for telecomcable connections.Cable identificationNo need trying to figureout which cable goeswhere. The cable identificationis very clear on theclever fixing guides.Safe and easy earthingThe panel has two earthingconnection points forboth shielded cables andfor the rack, easily accessibleat the rear.Clear markingThe telecom panelcomes with pre-printedlabels and openable labelholders.20 | Actassi Network Connectivity Jan 2013

Cable managers and accessoriesThe Actassi system also includes a range of power panels and smart accessoriesfor improved cable management. The power panels are available in several versions,for example with a protected light switch and overvoltage protection. The innovativepatchcords guiding panel is equipped with four openable rings, managing up to 24cords.Brush panelA patch-cord guiding panel for path-through application,blocking air-flow for a better cooling on the cabinet.Blank panelFor a homogeneous design this accessory, a blankmetal panel, comes in handy. Instead of an empty gapyou’ll have an aesthetically clean and designed frontcover.Guiding panelKeep the cords in order! This smart panel manages24 to 48 cords. It´s easily opened but still safe, since aclever device prevents cords from falling out. Also possibleto pull out only one cord if needed.Vertical rings for rack 800mm wideA smart detail – attached to each side of the guidingpanel (or any panel maintained by the Quick Fix) thesevertical rings will support and fasten your installationwith a 48 cord capacity.Vertical rings for rack 600mm wideFor the 600mm wide racks, use the smaller tie updevices to keep your installations in neat order.Network Connectivity Jan 2013Actassi | 21

Actassi 19" Panels19-C Copper panelsRangeTelecom panel 50 ports■■Telecom panel 50 ports in 2 rows.■■1U height.■■The telecom cable wires are terminated in LSA punch down blocks on the PCBaccording to a clear numbering.■■1 Quick Fix function on both sides to allow a simple, quick fixing position andsliding feature.■■With label holders.■■Cable organizer at the rear with number identification.■■Active Pin-out: 63,45 (2 pairs) for telephony.■■Includes two cage nuts M6 compatible with 8,5 x 8,5mm & 9,5mm x 9,5mm 19”perforations.■■With label holder and automatic earth kit.■■LSA punch down tool VDIB299001 requested.■■Dark grey RAL7016.DescriptionTelecom panel 50 portsReferenceVDIG141501VDIG141501Equipped sliding panel 1U 24 ports■■Equipped sliding 19" copper panel (with connectors, not mounted).■■1U height, 220mm depth.■■24 RJ45 ports.■■1 Quick Fix function on both sides to allow a simple, quick fixing position andsliding feature.■■Evolution : Panels equipped with 24 shutters in light grey, 4 label holders, andone cable manager at the rear.■■Metal sheet: Thickness 1,2 mm. Dark grey RAL 7016.■■Plastic parts in PA66 GF20 or PA6.■■Simple clicking connectors for mounting.■■Automatic earthing with the pre-equipped bus bar for FTP/STP versions.■■Dark grey RAL7016.Evolution version: Pre-equipped with 24 RJ45 Slim connectors (not mounted) and 24light grey shutters, 4 label holders, 1 rear cable organizer.DescriptionReferenceCategory 5eEquipped panel 1U with 24 RJ45 Cat 5e UTPEquipped panel 1U with 24 RJ45 Cat 5e FTPVDIG112241U50VDIG112241F50VDIG112241U50 /VDIG112241F50Category 6Equipped panel 1U with 24 RJ45 Cat 6 UTPEquipped panel 1U with 24 RJ45 Cat 6 STPVDIG112241U60VDIG112241B60Category 6 AEquipped panel 1U with 24 RJ45 Cat 6A UTPEquipped panel 1U with 24 RJ45 Cat 6A STPVDIG118241UX0VDIG112241BX022 | Actassi Network Connectivity Jan 2013

Actassi 19" Panels19-C Copper panelsRangeEmpty flat panel for angled connectors, 1U 24 ports■■1U height.■■24 RJ45 ports.■■Allows high-density cooper ports installation. Connectors are positioned in angleRecommended mounting with vertical side ring for vertical management of thepatch-cords (reference VDIM189412).■■1 Quick Fix function on both sides to allow a simple, quick fixing position andsliding feature.■■Equipped with a label holder and a cable manager at the rear.■■The cable manager can rotate and be removed to ease the accessibility.■■Metal Sheet: Thickness 1,2mm.■■Dark grey RAL 7016.■■Plastic parts in PA66 GF20 and PC.■■Simple clicking the connectors for mounting.■■Automatic earthing with pre-equipped bus bar.■■Use S-One RJ45 connectors to load the panel.■■Connectors details on page 40 (request two pack of 12).DescriptionEmpty flat panel with connectors in angle 1U FTP/STP 24 ports*ReferenceVDIG328241BVDIG328241BEquipped flat panel with connectors in angle, Cat 6 ASTP, 1U 24 ports■■1U height.■■24 RJ45 ports.■■Allows high-density cooper ports installation. Connectors are positioned in angleRecommended mounting with vertical side ring for vertical management of thepatch-cords (reference VDIM189412).■■1 Quick Fix function on both sides to allow a simple, quick fixing position andsliding feature.■■Equipped with a label holder and a cable manager at the rear.■■The cable manager can rotate and be removed to ease the accessibility.■■Metal Sheet: Thickness 1,2mm.■■Dark grey RAL 7016.■■Plastic parts in PA66 GF20 and PC.■■Simple clicking the connectors for mounting.■■Automatic earthing with pre-equipped bus bar.Equipped flat 19" copper panel with connectors in angle (connectors included, notmounted)DescriptionReferenceEquipped flat panel with connectors in angle 1U with 24 RJ45VDIG328241BX0Cat 6A STP*VDIG328241BX0Network Connectivity Jan 2013Actassi | 23

Actassi 19" Panels19-C Copper panelsRangeEmpty sliding panel1U 24 Ports■■Empty fixed 19" copper panel (without connectors).■■1U height.■■24 RJ45 ports.■■1 Quick Fix function on both sides to allow a simple, quick fixing position andsliding feature.■■Available in two versions- Evolution: Panels equipped with 24 shutters in light grey, 4 label holders, andone cable manager at the rear.- Basic: Panels without shutters, label holders, cable manager.■■Metal sheet: Thickness 1,2mm. Dark grey RAL 7016.■■Plastic parts in PA66 GF20 or PA6.■■Simple clicking connectors for mounting.■■Automatic earthing with the pre-equipped bus bar for FTP/STP versions.Evolution version: Pre-equipped with 24 light grey shutters, 4 label holders, 1 rear cableorganizer.DescriptionReferenceEmpty panel 1U UTP 24 portsVDIG112241UEmpty panel 1U FTP/STP 24 portsVDIG112241FVDIG112241UBasic version: Without label holders and cable organizerDescriptionEmpty panel 1U UTP 24 portsEmpty panel 1U UTP 24 portsReferenceVDIG012241UVDIG012241FVDIG012241UCable organizer■■Pack of 4 cable plastic organizers to click on the back of the cable manager.■■Option for fixed panel VDIG113241U, VDIG113241U50, VDIG113241U60already included on sliding patch panels.VDIM11U001DescriptionCable organizer for fixation of up to 24 cables inside the panelReferenceVDIM11U00124 | Actassi Network Connectivity Jan 2013

Actassi 19" Panels19-C Copper panelsRangePatchcord guiding panel (Quick fix, metal base)■■Patchcord guiding panel.■■1U / 2U.■■1 Quick Fix function on both sides to allow a simple, quick fixing position.■■4 openable rings, to support 24 patchcords (1U) or 48 patchcords (2U).■■Patchcord holder integrated inside the ring for opened position.■■Fixed version available.■■Dark grey RAL7016.■■Two cage nuts included.DescriptionPatchcord guiding panel 1U with 4 openable ringsReferenceVDIG188141VDIG188141Patchcord guiding panel 2U with 4 openable rings*VDIG188142VDIG188142* Available from end 2012Patchcord guiding panel (fixed, plastic)■■Rack mount clips eliminate the need for cage nuts and screws.■■Reinforced cable management rings can accommodate up to 50 patch cords.■■Cavities behind each ring provide additional space for cable slack.■■Additional depth on cable rings ensures compliance with minimum bend radiusrequirements.■■Compliments Actassi Patch Panel styling.DescriptionPatchcord guiding panel 1U fixedReferenceACTRJ1UCMPCACTRJ1UCMPCPatchcord guiding panel (fixed, metal base)■■Panel with metal fingers and plastic cover.■■Metal base powder coated to provide protection against scratches and dust.DescriptionPatchcord guiding panel 1U fixedReferenceACTRJ1UCMPMACTRJ1UCMPMBrush guiding panel (Quick fix, metal base)■■Patch-cord guiding panel for path-through application.■■1U.■■Dark grey RAL 7016.■■Blocking air-flow for a better cooling on the cabinet.■■For connection from the back to the front of the cabinet, such as blade serverconnectivity, or NVR/DVR CCTV video storage.DescriptionPatchcord brush guiding panel 1U*ReferenceVDIG188201VDIG188201Network Connectivity Jan 2013Actassi | 25

Actassi 19" Panels19-C Copper panelsRangeVertical rings■■Rings for vertical management of patchcords.■■Openable.■■For racks 800 x 800 mm and 600 x 600 mm.■■Can be fixed on each side of any QuickFix system panel or guiding panel.■■Large capacity up to 48 cords.DescriptionRings for vertical management of patchcords, for rack 800 mm wideReferenceVDIM189112Rings for vertical management of patchcords, for rack 600 or 800 mmwideVDIM189412VDIM189112VDIM189412Rings for vertical management of patchcords, using self-grip strip, forrack 600 mm wideVDIM189111VDIM189111VDIM11U***RJ45 ShuttersDescriptionShutters, blue, pack of 24 pcsShutters, yellow, pack of 24 pcsShutters, green, pack of 24 pcsShutters, red, pack of 24 pcsShutters, grey, pack of 24 pcs (already included in Quick fix panel)Rack earthing kitDescriptionRack earthing kit, pack of 10 pcsReferenceVDIM11U241VDIM11U242VDIM11U243VDIM11U244VDIM11U246ReferenceVDIM48E011VDIM48E011Metal blank panel■■1 Quick Fix function on both sides to allow a simple, quick fixing positionDescriptionBlank panel 1UReferenceVDIG188021VDIG188021Metal shelf■■1 Quick Fix function on both sides to allow a simple, quick fixing position.DescriptionShelf 1U, depth 250 mm, for max weight 15 kgsReferenceVDIG188011VDIG188011ToolPunch Down Tool for LSA contacts, to use for Telecom panel cable connectionDescriptionReferencePunch down tool LSA ContactsVDIB299001VDIB29900126 | Actassi Network Connectivity Jan 2013

Network Connectivity Jan 2013Actassi | 27

28 | Actassi Network Connectivity Jan 2013

Actassi Copper solutionConnectors............................................................................................................................... 30Copper Cables...................................................................................................................... 37Copper Patch cords....................................................................................................... 50Network Connectivity Jan 2013 Actassi | 29

Actassi S-One RJ45 connectorsP121615Actassi S-One with one-piece designfor faster and safer installationsWithout any loose parts the Actassi S-One connector is more compact, easier tohandle and up to 50% faster to connect. The connector is delivered open, ready toconnect. It has an automatic 360° cable earthing, a simple locking termination anda very smart locking function. The robust one-piece design is suitable for all applications,and in the Actassi S-One range you’ll find both shielded and unshielded connectorsof all categories.P121597P121620Ready... Steady... Done.P121599Insert the cable in thecentral U-shaped entry.Close the smart bridle –it will automatically lockthe cable and provide360° earthing.Shut the connector. A“click” confirms that it’slocked into its firm andreliable position.30 | Actassi Network Connectivity Jan 2013

Actassi S-OnebenefitsU-shaped cable entry with a smartbridleDespite being compact in size, the connector hasenough space inside for your work. Allfunctions are designed to ease your installation.P121611Smart bridle with elastomerinsert for cablelocking reduces risk ofdamaging cables.U-shaped cableentry. Easy accessfor all cables.Safe and automatic360° earthingActassi S-One easily providesautomatic earthing without anytools.P121610P121614Central cable entry foroptimized performance.Protected IDCWith Actassi S-One it’s nearly impossible todamage cables or fingers, since the IDC isconcealed in a cavity.P121608Automatic 360° earthingwith spring-loaded lockingand earthing bridle.P121616P121609Insulated plastic IDC housingeliminates short-circuitbetween conductors andmetal body.P121622Integrated earth-draincontact provides doubleearthing.Ergonomic designInstalling shouldn’tbe painful! So in theActassi S-One rangeit isn’t.Bridle with elastomerinsert (unshielded) forconvenient locking andsoft touch.Re-open in two clicksYou can hear theActassi S-One openingand closing.Quick-release buttons fortool-less re-opening.Reduced risk of damagingconnections.Re-close with a simpleclick-click.Smooth design withrounded edges.P121619Touch-friendly materials.P121618Network Connectivity Jan 2013 Actassi | 31

Actassi connectorscolour-codedThe Actassi RJ45 wire organizers are colour-coded tomake performance identification safer and easier. Bothshielded and unshielded connectors are codedaccording to the same system. Connectors are keystonefootprint.ShieldedThe shielded Actassi connectors have two verytime saving and safe features.UnshieldedPractical eco-box• Box of connectors for shieldedversion.• Connectors delivered open,ready to connect.• Cardboard package for easyrecycling.The unshielded Actassi connectors have asmooth feel. The design promotes safety andcomfort by its finely contoured shape, edges andelastomer insert.Full compliance with ISO/IEC 11801:2011 Ed2.2To get your complete network installation classified you need to work with classified components.That’s why you should choose our solutions. We provide seamless end-to-end connectivity throughsafe, speedy and reliable network installations. We are constantly adjusting and updating our portfolio,and at the same time making sure that they are fully compatible with older and future solutions.32 | Actassi Network Connectivity Jan 2013

Up to 10 Gbps Ethernet Up to 1 Gbps Ethernet Up to 1 Gbps EthernetCat 6 A Cat 6 Cat 5eEvery part in our Actassi range is certified to deliver what we claimthey will. The Actassi components are produced in Europe andAsia Pacific and fully compliant with ISO/IEC 11801:2011 Ed2.2 forCat 6 A , so you can always count on an outstanding performanceand reliability.Network Connectivity Jan 2013Actassi | 33

Actassi CopperS-One RJ45 ConnectorsRangeActassi S-One RJ45 connectors■■Performance categories: Cat 6 A , 6 and 5e, shielded and unshielded.■■Material: Shielded in zamak, unshielded in ABS plastic.■■Size: Height 28 mm, width 18 mm, depth 35 mm.■■Applicable standards:– ISO/IEC 11801:2011 Ed2.2, class EA permanent link and channel.– IEC 60603-7-51 Cat 6 A connecting hardware.– ANSI/TIA-568-C.2 Cat 6 A connecting hardware.■■One-piece design and U-shaped cable entry.■■Tool-less IDC termination.■■Earthing (shielded): Metallic, 360° self-adjusting, plus drain wire contact.■■Operational temperature range: - 40° C to + 70° C.■■Footprint on wiring device: slim InfraPlus.S-One C6A – Cat 6ADescription Qty/pack ReferenceRJ45 Connector Cat 6A UnshieldedBlack, Dark blue color on top12 VDIB1772XU12VDIB1772XU12RJ45 Connector Cat 6A ShieldedMetal, Dark blue color on top12 VDIB1772XB12VDIB1772XB12S-One C6 – Cat 6Description Qty/pack ReferenceRJ45 Connector Cat 6 UnshieldedBlack, Light blue color on top12 VDIB17726U12VDIB17726U12RJ45 Connector Cat 6 ShieldedMetal, Light blue color on top12 VDIB17726B12VDIB17726B12S-One C5e – Cat 5eDescription Qty/pack ReferenceRJ45 Connector Cat 5e UnshieldedBlack, Green color on top12 VDIB17725U12VDIB17725U12RJ45 Connector Cat 5e ShieldedMetal, Green color on top12 VDIB17725B12VDIB17726B1234 | Actassi Network Connectivity Jan 2013

Actassi CopperKeystone RJ45 and RJ11ConnectorsRangeActassi Keystone RJ45 connectors■■Performance categories: Cat 6A, 6 and 5e, unshielded.■■Applicable standards:– ISO/IEC 11801:2011 Ed2.2, class EA permanent link and channel.– ANSI/TIA-568-B.2-10 Cat 6A connecting hardware.– ISO/IEC 11801 Edition 2002, class E and D permanent link and channel.– ANSI/TIA-568B Series connecting hardware.■■Keystone Design.■■Supports up to 10G ethernet application (Cat6A / Class Ea).■■Operational temperature range: - 40° C to + 70° CKeystone Cat 6ADescriptionRJ45 Keystone connector Cat 6A, black, unshielded*RJ45 Keystone connector Cat 6A unshielded, black with shutter*ReferenceVDIB1776XUBKVDIB1774XUBK* White colour available on request (WE)VDIB17766UBKKeystone Cat 6DescriptionRJ45 Keystone connector Cat 6 unshielded, black*RJ45 Keystone connector Cat 6 unshielded, black with shutter*ReferenceVDIB17766UBKVDIB17746UBK* White colour available on request (WE)Keystone Cat 5eDescriptionRJ45 Keystone connector Cat 5e unshielded, black with shutter*ReferenceVDIB17745UBK* White colour available on request (WE)Keystone Cat 3 (Telephony)DescriptionRJ11 Keystone connector Cat 3 unshielded, whiteReferenceDCRJ11KYNUWTNetwork Connectivity Jan 2013Actassi | 35

Actassi Copper30M WD-fit RJ45 ConnectorsRangeActassi 30M RJ45 connectors■■Performance categories: Cat 5e and Cat 6, unshielded.■■Applicable standards:- ISO/IEC 11801:2011 Ed2.2, class EA permanent link and channel.- ISO/IEC 11801 Edition 2002, class E and D permanent link and channel.- ANSI/TIA-568B Series connecting hardware.■■Keystone Design.■■Supports up to 10G ethernet application.■■Operational temperature range: -40°C to +70°C.30M Cat 6Description30M RJ45 Cat6 UTP, no shutter, black30M RJ45 Cat6 UTP, no shutter, white30M RJ45 Cat 6, UTP, shuttered, black30M RJ45 Cat 6, UTP, shuttered, whiteReferenceVDIB17756UBKVDIB17756UWEVDIB17736UBKVDIB17736UWE30M Cat 5eDescription30M RJ45 Cat5e UTP, no shutter, black30M RJ45 Cat5e UTP, no shutter, whiteReferenceVDIB17735UBKVDIB17735UWE36 | Actassi Network Connectivity Jan 2013

Actassi copper cablesActassi copper cables are available from Category 5 to Category 7A to satisfy all possibleneeds.Network Connectivity Jan 2013Actassi | 37

Actassi copper cablesThree ranges that cover all needsCL-C offerStandard copper LAN cables for your day-to-day installations, based on U/UTP and F/UTP cables, from category 5 to category 6 A. The CL-C cablesare reliable and well-known, with good performance.CL-MNC offerHigh-end copper LAN cables for performances from category 6 to cate-gory7 A 1000 MHz. Exceeding international standards by 3 dB minimum on NEXT& RL. Full Delta certification for components and permanent links.CL-MX offerExclusively designed LAN copper cables for category 6 A with a patentedsingle-foil metallic Xfiller, providing high performance and reliable shieldedinstallations. Exceeding international standards by 3 dB minimum on NEXT& RL. Full Delta certification for components and permanent links.Actassi offer overviewPerformancesType of shieldingCat. 5 Cat. 6 Cat6 A Cat7 AS/FTPF/FTPU/FTPSF/UTPF/UTPU/UTPCL-MNCCL-CCL-MNCCL-MXCL-MNCCL-C* CL-C CL-CCL-MNCCL-C*CL-C*CL-MNCCL-CCL-MNCCL-MNC**CL-MNC* Available with PVC or LSZH jacket material.** Available with LSZH or LSFRZH (LSZH + improved Fire Resistance) sheath material.Cable standardisationX/X TPTP= Twisted PairF= Foil screened, U=UnscreenedF=Foil screened, S=Braid screened, SF=Braid & Foil screened, U=Unscreened38 | Actassi Network Connectivity Jan 2013

Actassi copper cablesSome important advantagesCL-MX patented metallic crossfillerNew and patented metallic crossfiller design of the CL-MX LAN copper cable,providing superior shielding, faster installations and increasedefficiency.CL-MNC crossfiller with optimized design andmicro-bladesWith an optimized design and specific micro-blades, you will have betterperformances in NEXT and ELFEXT, and a better resistance to themechanical constraints.CL-C, CL-MNC, CL-MX conductivityFor the whole offer, the conducting side of the shield is turned outwards.Thus, there is no need to turn the shield inside out before applying theconnector to have a good conductivity. You will gain time during installation,there will be no destruction of the shield and you will get very good shielding.F 2 Construction (Firm & Flexible)Our patent pending F 2 Construction design delivers unrivalled structuralintegrity and ensures far superior data transmission performance, moreheadroom, higher cable balance and reliability.CertificatesAll LAN cables from Category 6 are certified at a component level by theindependent third-party laboratory. Certificates are regularly updated to becompliant to the latest and highest international standards.Network Connectivity Jan 2013Actassi | 39

Actassi copper cablesPerformancesFrequency (MHz)250 500 1000Attenuation (dB)* 33 33 33 45.3 45.3 61.9NEXT (dB)* 39.3 42.3 59.3 34.8 54.8 60.4ACR-F (dB)* 20 23 20 14 24 35.3Propagation speed (%c) 66 66 78 70 70 78Cat 6CL-C U/UTPCL-MNC U/UTPCL-C F/UTPCL-MNC U/FTPCat 6ACL-C U/UTPCL-C F/UTPCL-MNC U/UTPCL-MNC F/UTPCL-MNC U/FTPCL-MNC F/FTPCL-MX F/FTPCat 7ACL-MNC F/FTPCL-MNC S/FTPCL-MNC S/FTP* Nominal characteristics given for 100 meters at maximum frequencies:250 MHz for category 6, 500 MHz for category 6 A, 1000 MHz for category 7 A.40 | Actassi Network Connectivity Jan 2013

Actassi CL-MNC F 2 cablesThe efficient, reliable, invisible heroin your officeStructured cabling is the vital link between all the components in your computernetwork. Poor installation can cause severe bending and stress of cabling, oftenresulting in system failure. Our “Tough” cabling incorporates a patent-pending F2construction that guarantees performance under widely varied installation quality.4-twisted pairs of high-purity solid copper wires optimize flexibility, ease of installationand long-range data transmission efficiency. Durable PVC protective jacketensures longer product life by keeping cables tangle-free and enhancing tearresistance.High-density Polyethylene insulation provides better protection andoptimum resistance to extreme temperatures and climactic conditions.CL-MNC F 2 Cat 6 UTP Cable TransmissionPerformance TableFreq(MHz)NEXT(dB)PS NEXT(dB)EL FEXT(dB)Attenuation(dB/100m)RL(dB)1.00 74.30 99.01 72.30 95.02 67.80 90.75 2.02 1.63 20.00 28.824.00 65.27 88.22 63.27 86.97 55.76 81.02 3.78 3.37 23.01 34.3710.00 59.30 80.18 57.30 77.80 47.80 74.32 5.95 5.41 25.00 36.30Superior headroomand bandwidth.16.00 56.24 83.57 54.24 73.94 43.72 75.87 7.55 6.88 25.00 34.8120.00 54.78 72.49 52.78 72.02 41.78 84.65 8.47 7.71 25.00 38.8531.25 51.88 73.94 49.88 73.38 37.90 71.38 10.67 9.69 23.64 40.3062.50 47.36 68.33 45.36 65.40 31.88 61.96 15.38 13.84 21.54 35.15100.00 44.30 66.38 42.30 64.34 27.80 60.16 19.80 17.65 20.11 39.92200.00 39.78 68.63 37.78 65.18 21.78 58.57 28.98 25.34 18.00 38.49250.00 38.33 66.64 36.33 65.15 19.84 59.24 32.85 28.49 17.32 32.92* Values in Grey refer to the requirement of TIA/EIA & ISO/IEC Standards* Values in Green refer to Typical Actassi F 2 Cat6 UTP cable performance, tested based on105 meters.Network Connectivity Jan 2013Actassi | 41

Actassi CL-MX cables3 times improved performance with1 new metallic crossfillerVisit: http://tv.schneiderelectric.com,todownload the ActassiCL-MX cable videoThe patented crossfiller brings 3x shielding and superior Electro Magnetic Compatibility(EMC). Thanks to the unique design, the EMC performance is among thebest in the market with performances exceeding the standard requirements forshielded cables with braid (S/FTP). The metallic crossfiller ensures an improvedtransfer impedance to fit requirements of sensitive areas where data transmissionis critical. Best of all, Actassi CL-MX cables require less operations to be installed.New!Patented metallic crossfillerfor superior EMC andreduced installation timeDrain wire1Outer sheath in LSZHor LSFRZHInsulated AWG 23 copperconductors21233x shieldingInner crossOuter shieldingDouble outer shieldingSuperior headroom andbandwidth, exceedinginternational and localstandards.3Designed for improved EMCHigh-speed transmission protocols beyond 10Gbit/s highlight ANEXT sensitivity and noiseimmunity as key performance factors for efficient,secure and robust installations. The single-foilstructure of the metallic crossfiller acts like a triplescreen protection around the copper twisted pairs.This specific design enhances EMC performancesto reach grade 1 on the transfer impedanceparameter, which is better than a shielded designwith braid.10000mΩ/m100010010U/FTP 6ACL-MX 6ATransfer ImpedanceGrade 2Grade 1S/FTP 7A10,1 1 F(MHz)10 10042 | Actassi Network Connectivity Jan 2013

Better link performanceWith Actassi CL-MX the installations are easy andsafe. According to the international stand-ards forshielded LAN cables, the use of CL-MX cables willrequire less installation operations:- No separation distance to power cabling*- No ANEXT field testing*EN 50174-2 to be referredThe fire propertiesare documented bystandardized methodsaccording to IEC60332-1,60332-3C,60754-1 and60754-2.Improved safety in case of fireActassi CL-MX is available in two versions, theflame retardant LSZH and the fire retardantLSFRZH. Both are halogen-free. In case of fire,the result of using CL-MX is the reduction of theemissions of opaque smoke and acid gases.Thus, it helps reducing damages to equipmentand allows people to escape from the buildingmore easily.Less cutting with Actassi CL-MX3Three times fasterinstallation withActassi CL-MXUse the cable strippertool and cut the outersheath.Cut the one single foilmetallic crossfiller andremove it witha simple grip.Your CL-MX is readyto connect.Instead of separate wrapped-in foil pairs (like intraditional F/FTP or F/UTP cables), the ActassiCL-MX new crossfiller is wrapped in one singlefoil. This means less cutting and improved qualityof the cable preparation. No need to pay attentionto cutting the foils at exactly the same level, or tothe length of the F/UTP plastic cross.Why traditional F/FTP cables are 3 times slower to installPrepare yourtools.Use the cablestripper tooland cut theouter sheath.Cut the outerfoil.Remove the foil.Separate allpairs and thedrain wire.Cut and removethefoil of thefirst pair.Cut and removethefoil of thesecond pair.Cut and removethefoil of thethird pair.Cut and removethefoil of thefourth pair.Network Connectivity Jan 2013Actassi | 43

Actassi CopperCL-C Copper LAN cablesRangeP120015, P120016P119661P120013, P120014P119659P119918P119917CL-C Cat 3 F/UTP Multi pair cableSpecificationsbb100 ohms, 16 MHz, AWG24, 128 twisted pairs with overall screenbbCompliant to IEC61156-1 standardUsebbPhone backboneType Weight Diameter Sheath Cond/Length Ref. No128 pair cable 759 kg/km < 23.5 mm LSZH Drum/meter VDIC235212CL-C Cat 5 F/UTP Multi pair cableSpecificationsbb100 ohms, 100 MHz, AWG24, 25 twisted pairs with overall screenbbOrganisation of the pairs in three levels (for 25 pairs) with aramid fibrePerformancesbbCompliant to ISO 11801, EN50173 and IEC61156-4 standardUsebbPhone backboneType Weight Diameter Sheath Cond/Length Ref. No25 pair cable 210 kg/km 13.6 mm LSZH Drum/meter VDIC235225Our multipair cables are sold in meters, from minimum 50 meters to 400 meters. Lengthsbetween 400 and 500 m are always delivered in drums of 500 m.CL-C Category 5e Copper LAN cablesCL-C Cat 5e U/UTPSpecificationsbb100 Ohms, 155 MHz, AWG24, 4 pairs or 2x4 twisted pairs without screen. Compatible withPoE standards (Power over Ethernet) and PoEP (Power over Ethernet Plus) which allow tosupply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 andTIA/EIA-568-C.2 standardsNEXT Nominal Standard IEC100 MHz 35.3 dB ≥ 35.3 dBUsebbNetwork cabling systems for category 5 voice & data applications. Data rates transmission:Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 37 kg/km 6.5 mm LSZHLSZHPVCPVC305 m500 m305 m500 mVDIC115118VDIC115218VDIC115118PVDIC115218P2x4 pair cable 74 kg/km 6.5x13.4 mm LSZH 500 m VDIC115228CL-C Cat 5e F/UTPSpecificationsbb100 Ohms, 155 MHz, AWG24, 4 pairs or 2x4 twisted pairs without screen. Compatible withPoE standards (Power over Ethernet) and PoEP (Power over Ethernet Plus) which allow tosupply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 standardsNEXT Nominal Standard IEC100 MHz 35.3 dB ≥ 35.3 dBUsebbNetwork cabling systems for category 5 voice & data applications. Data rates transmission:Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 37 kg/km 6.5 mm LSZHLSZHPVCPVC305 m500 m305 m500 mVDIC135118VDIC135218VDIC135118PVDIC135218P2x4 pair cable 74 kg/km 6.5x13.4 mm LSZH 500 m VDIC13522844 | Actassi Network Connectivity Jan 2013

Actassi CopperCL-C Copper LAN cablesRangeP119658CL-C Category 6 Copper LAN cablesCL-C Cat 6 U/UTPSpecificationsbb100 ohms, 250 MHz, AWG23, 4 pairs or 2x4 pairs without screenbbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2, EN50288-6-1 andTIA/EIA-568-C.2 standardsNEXT Nominal Standard IEC250 MHz 39.3 dB ≥ 39.3 dBUsebbNetwork cabling systems for category 6 voice & data applications. Data rates transmission:Gigabit Ethernet, 10/100 BaseT.P110559Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 48 kg/km 6.1 mm LSZHPVCPVC305 m305 m500 mVDIC116118VDIC116118PVDIC116218P2x4 pair cable 96 kg/km 6.1x13.2 mm LSZH 500 m VDIC116228P119667P120018P120017CL-C Cat 6 F/UTPSpecificationsbb100 ohms, 250 MHz, AWG24, 4 pairs or 2x4 pairs with overall screen. Cross filler to organizethe pairs.bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and EN50288-5-1standardsNEXT Nominal Standard IEC250 MHz 39.3 dB > 39.3 dBUsebbNetwork cabling systems for category 6 voice & data applications. Data rates transmission:Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 56 kg/km 7.5 mm LSZH 500 m VDIC1362182x4 pair cable 113 kg/km 7x15 mm LSZH 500 m VDIC136228P119662P120015P120019CL-C Cat 6 SF/UTPSpecificationsbb100 ohms, 250 MHz, AWG23, 4 pairs with overall screen and metallic braidbbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and EN50288-5-1standardsNEXT Nominal Standard IEC250 MHz 39.3 dB > 39.3 dBUsebbNetwork cabling systems for category 6 voice & data applications. Data rates transmission:Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 56 kg/km 7.9 mm LSZH 500 m VDIC176218Network Connectivity Jan 2013Actassi | 45

Actassi CopperCL-C Copper LAN cablesRangeP119667P120018CL-C Category 6A Copper LAN cablesCL-C Cat 6 A F/UTPSpecificationsbb100 ohms, 500 MHz, AWG24, 4 pairs or 2x4 pairs with overall screenbbCross filler to organize the pairs.bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC 61156-5 Ed2 and DraftEN50288-10-1 standardsNEXT Nominal Standard IEC500 MHz 34.8 dB > 34.8 dBUsebbNetwork cabling systems for category 6A voice & data applications. High data ratestransmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 59 kg/km 7.4 mm LSZH 500 m1000 mVDIC13X218VDIC13X3182x4 pair cable 121 kg/km 7.4x15.8 mm LSZH 500 m VDIC13X228P12001946 | Actassi Network Connectivity Jan 2013

Actassi CopperCL-MNC Copper LAN cablesRangeP119660P120040P119665CL-MNC Category 6 Copper LAN cablesCL-MNC Cat 6 U/UTPSpecificationsbb100 ohms, 300 MHz, AWG23, 4 pairs without screen. Cross filler to organize the pairsbbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2, EN50288-6-1 andTIA/EIA-568-C.2 standardsNEXT Nominal Standard IEC300 MHz 44 dB > 39.3 dBUsebbNetwork cabling systems for category 6 voice & data applications. Data rates transmission:Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 48 kg/km 6.3 mm LSZH 500 m VDIC616218CL-MNC Cat 6 U/FTPSpecificationsbb100 ohms, 300 MHz, AWG23, 4 pairs or 2x4 pairs with individual screensbbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and EN50288-5-1standardsNEXT Nominal Standard IEC300 MHz 44 dB > 39.3 dBUsebbNetwork cabling systems for category 6 voice & data applications. Data rates transmission:Gigabit Ethernet, 10/100 BaseT.P120021Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 56 kg/km 7.5 mm LSZH 500 m1000 mVDIC626218VDIC6263182x4 pair cable 113 kg/km 7x15 mm LSZH 500 m VDIC626228P66671P119664P93171CL-MNC Category 6A Copper LAN cablesCL-MNC Cat 6 A F/UTPSpecificationsbb100 ohms, 550 MHz, AWG23, 4 pairs and 2x4 pairs with overall screen. Specific cross filler toorganize the pairsbbNVP = 70%bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and DraftEN50288-10-1 standardsNEXT Nominal Standard IEC550 MHz 40 dB > 34.8 dBUsebbNetwork cabling systems for category 6A voice & data applications. High data ratestransmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 53 kg/km 7.8 mm LSZH 500 m1000 mVDIC63X218VDIC63X3182x4 pair cable 106 kg/km 7.8x16.6 mm LSZH 500 m VDIC63X228P120022Network Connectivity Jan 2013Actassi | 47

Actassi CopperCL-MNC Copper LAN cablesRangeP119665P120021CL-MNC Cat 6 A U/FTPSpecificationsbb100 ohms, 550 MHz, AWG23, 4 pairs and 2x4 pairs with individual screenbbNVP = 80%bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and DraftEN5028810-1 standardsNEXT Nominal Standard IEC550 MHz 67dB > 34.8 dBUsebbNetwork cabling systems for category 6A voice & data applications. High data ratestransmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 57 kg/km 8.3 mm LSZH 500 m1000 mVDIC62X218VDIC62X3182x4 pair cable 114 kg/km 8.3x17 mm LSZH 500 m VDIC62X228P66671P126513CL-MX Category 6A Copper LAN cablesCL-MNC Cat 6 A F/FTPSpecificationsbb100 ohms, 550 MHz, AWG23, 4 pairs and 2x4 pairs with patented single-foil metalliccrossfiller designbbSuperior EMC performances: Grade 1 Transfer ImpedancebbQuick and simple twin removal actions for the sheath and the shieldbbNVP = 82%bbFire retardant properties for LSFRZH version according to IEC60332-3C, NFC32070 2.1,NFC32070 2.2bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WStandardsbbCompliant to EN50173-1, ISO/IEC11801:2011 Ed2.2, IEC61156-5 Ed2 and Draft EN50288-10-1 standardsNEXT Nominal Standard IEC550 MHz 67 dB > 34.8 dBUsebbNetwork cabling systems for category 6A voice & data applications. High data ratestransmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 55 kg/km 7.8 mm LSZH 500 m VDIC68X2184 pair cable 55 kg/km 7.8 mm LSZH 1000 m VDIC68X3182x4 pair cable 110 kg/km 7.8 mm x 16.8 LSZH 500 m VDIC68X2284 pair cable 65 kg/km 8.2 mm LSFRZH 500 m VDIC68X218F014 pair cable 65 kg/km 8.2 mm LSFRZH 1000 m VDIC68X318F012x4 pair cable 130 kg/km 8.2 mm x 17.4 LSFRZH 500 m VDIC68X228F0148 | Actassi Network Connectivity Jan 2013

Actassi CopperCL-MNC Copper LAN cablesRangeP119666P120023CL-MNC Category 7A Copper LAN cablesCL-MNC Cat 7 A F/FTPSpecificationsbb100 ohms, 1000 MHz, AWG23, 4 pairs and 2x4 pairs with individual screen and overallscreen, PiMF constructionbbNVP = 80%bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and DraftEN5028810-1 standardsNEXT Nominal Standard IEC1000 MHz 60.4 dB > 60.4 dBUsebbNetwork cabling systems for category 7A voice & data applications. High data ratestransmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 57 kg/km 7.9 mm LSZH 500 m1000 mVDIC648218VDIC6483182x4 pair cable 106 kg/km 7.9x16.8 mm LSZH 500 m VDIC648228P119880P66659P120023CL-MNC Cat 7 A S/FTPSpecificationsbb100 ohms, 1000 MHz, AWG23, 4 pairs and 2x4 pairs with individual screen and metallicbraid, PiMF construction.bbNVP = 80%bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WPerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and DraftEN5028810-1 standardsNEXT Nominal Standard IEC1000 MHz 60.4 dB > 60.4 dBUsebbNetwork cabling systems for category 7A voice & data applications. High data ratestransmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 57 kg/km 7.9 mm LSZH 500 m1000 mVDIC658218VDIC6583182x4 pair cable 114 kg/km 8.3x17 mm LSZH 500 m VDIC658228P123503P123954P66659CL-MNC Cat 7 A S/FTPSpecificationsbb100 ohms, 1000 MHz, AWG23, 4 pairs and 2x4 pairs with individual screen and metallicbraid,PiMF construction.bbNVP = 80%bbCompatible with PoE (Power over Ethernet) and PoEP (Power over Ethernet Plus) whichallow to supply equipments (IP phone, camera, WIFI hotspot…) until 13W or 25WbbFire retardant properties according to IEC60332-3C, NFC32070 2.1, NFC32070 2.2PerformancesbbCompliant to EN50173-1, ISO/IEC 11801:2011 Ed2.2, IEC61156-5 Ed2 and DraftEN50288-10-1 standardsNEXT Nominal Standard IEC1000 MHz 60.4 dB > 60.4 dBUsebbNetwork cabling systems for category 7A voice & data applications. High data ratestransmission: 10 Gigabit Ethernet, Gigabit Ethernet, 10/100 BaseT.Type Weight Diameter Sheath Cond/Length Ref. No4 pair cable 57 kg/km 7.9 mm LSFRZH 1000 m VDIC658318F012x4 pair cable 114 kg/km 7.9x16.8 mm LSFRZH 500 m VDIC658228F01P123955Network Connectivity Jan 2013Actassi | 49

Actassi copper patch cordsActassi copper patch cords ensure a reliable transmission in data networks. They areavailable in several lenghts, from Cat 5e to Cat 6 A performances, covering both shieldedand unshielded needs.All patch cords are compliant with ISO/IEC 11801 Ed2.2. They are all third party certifiedand also compliant to EN50173ed.3. , EIA/TIA 568 - C.2, IEC 61935-2. Actassicopper patchcords provide safe plug & play with a high quality thanks to the performances,the LSZH sheath also available and the warranties.All patch cords are individually tested and packed.Cat 6 and above have an option of couloured clips for easy identification.Coloured clips for easyidentificationFlexible plug-clip to securea reliable connection.When you hear theCLICK, you know thateverything is okSnag-free boot protects theplug-clip from breakageGold-plated contact pinsfor maximum performanceLSZH sheath also available.Material with low smokeemissions and non-toxicgases in case of fireFor availing international end to end system performance warranty, it is mandatory to useSchneider Electric Actassi patch cords.50 | Actassi Network Connectivity Jan 2013

Actassi CopperCopper patch cordsRangePatch cord U/UTP category 5eACTPC5EUBCM10BUSpecificationsbb100MHZ, outer sheath PVC.PerformancesbbFully compliant to AS/NZS 3080:2003 Class D and Category 5e Standards.bbFully moulded boot and insert not only ensures pair integrity but also provides an enhanced strain relief, especially duringinstallations or moves.Type Colour of sheath Length (m) Ref. No4 pair Blue* 1.02.03.05.0ACTPC5EUBCM10BUACTPC5EUBCM20BUACTPC5EUBCM30BUACTPC5EUBCM50BUACTPC6UBCM10BUPatch cord U/UTP category 6Specificationsbb300MHZ, outer sheath PVC.PerformancesbbFully compliant to AS/NZS 3080:2003, ISO/IEC 11801 Edition 2 2002 and ANSI/TIA/EIA-568-B Series Connecting HardwareStandards.bbBackward Compatible with Cat 5e products.Type Colour of sheath Length (m) Ref. No4 pair Blue* 1.02.03.05.0ACTPC6UBCM10BUACTPC6UBCM20BUACTPC6UBCM30BUACTPC6UBCM50BU* Green, Red, Yellow, Grey available on requestNetwork Connectivity Jan 2013Actassi | 51

Actassi CopperCL-MNC Copper patch cordsRangePatch cord U/UTP category 6 ASpecificationsbb550 MHz, outer sheath LSZH.Type Colour of sheath Length (m) Ref. No4 pair Grey 1.02.03.05.0VDIP181X46010VDIP181X46020VDIP181X46030VDIP181X46050Patch cord F/STP category 6 ASpecificationsbb550 MHz, outer sheath PVC.Type Colour of sheath Length (m) Ref. No4 pair Grey 1.02.03.05.0VDIXG3005VDIXG3006VDIXG3033VDIXG3036Patch cord S/FTP category 6 ASpecificationsbb550 MHz, outer sheath LSZH.Type Colour of sheath Length (m) Ref. No4 pair Grey 1.02.03.05.010.0VDIP185X46010VDIP185X46020VDIP185X46030VDIP185X46050VDIP185X46100Coloured clipsDescription Packaging Colour Ref. NoColoured clips 10 Blue VDIP1811Coloured clips 10 Yellow VDIP1812Coloured clips 10 Green VDIP1813Coloured clips 10 Red VDIP1814Patch Cord MarkersDescription Colour Ref. NoCable Marker White VDIP25610BlueYellowGreenVDIP25611VDIP25612VDIP25613RedBlackOrangeVioletVDIP25614VDIP25615VDIP25616VDIP2561852 | Actassi Network Connectivity Jan 2013

Network Connectivity Jan 2013Actassi | 53

54 | Actassi 04.2012 Network Connectivity | Network Connectivity Jan 2013

Actassi Fibre solutionFL-C Fibre Optic Cables..............................................................................................60FL-C Fibre Optic Patch cords ...............................................................................66FL-C Fibre Optic Connectors ...............................................................................69FL-C Fibre Optic Pigtails ...........................................................................................7019-C Fibre Optic Panels, Adapters and Accessories......................71Network Connectivity | Jan 04.2012 2013Actassi | 55

Actassi fibre optic cables.Part of a total solution.Actassi Fibre LAN cables are an important part of our total Network Connectivity solutionthat also includes panels, enclosures, connectors etc. All Network Connectivityproducts are specially designed to work perfectly together with complementary SchneiderElectric products like trunking, poles, boxes and wiring devices in order to deliver trueand seamless end-to-end connectivity.443125The Fibre LAN offer covers needs for all kinds ofLAN installations:Campus (between buildings), Building backbones(between technical rooms) and Distribution (fromtechnical rooms to workstations).Actassi network connectivity1 Enclosures2 Panels for data, fibre optic and telecom3Fibre LAN backbone cables45Copper LAN and Fibre LAN distribution cablesFibre LAN campus cables56 | Actassi Network Connectivity Jan 2013

A complete product portfolio forLAN installationsThe Fibre LAN range offers a complete product portfolio for LAN installations. Providingthe best support for high-speed data networks the fibre LAN range complementsour Copper LAN offer. Optic cables, patchcords, connectors, tools and accessories arepart of the Fibre LAN offer.The Actassi 19” fibre optic panel is one of the mostinstallation and user-friendly panels on the market.Quick-fix, sliding function, integrated guiding panel,excellent protection and clear marking, coiling wheelsand much more.Fibre optic technology offers severaladvantages• Very high data rates• Flexible, reliable networks• Very low & constantattenuation• Long distances(up to 40 km)• No EMC rules• No grounding issue• Immune to crosstalks• Safety in sensitiveenvironments (no spark)• Confidentiality• No corrosion• Simplified field testing• High port densityNetwork Connectivity Jan 2013Actassi | 57

Fibre optic performancesActassi Fibre LAN is a reliable and robust solution for high-speed data networks.The range includes both OM1, OM2 and OM3, but also OM4 and OS2 following the lateststandards.Fibre LAN performances in brief:• Supports all kinds of network applications like 10 Gigabit/s Ethernet, Gigabit/sEthernet, FastEthernet, Ethernet.• Guarantees the compatibility with LAN active components.• Compliant with international LAN optic transmission standards• Available in multimode and single-mode, adapted to all LAN active equipmentsusing LED, VCSEL and LASER technologies.Two types of fibres:Multimode and Single-modeMultimode (OM1,OM2, OM3, OM4)■■4 ranges of multimode optic fibres performances:OM1 62,5/125, OM2 50/125, OM3 50/125 and OM450/125. Meeting the markets needs up to 10Gigabit/s.■■OM4 50/125 performance. Meeting the marketsneeds for speeds beyond 40 Gigabit/s and 100Gigabit/s.■■High bandwidth. Optimized to increase themaximum optic link distance at both operatingwavelengths (850nm and 1300nm).■■Low attenuation. Optimized to decrease the signalattenuation at both operating wavelengths(850nm and 1300nm).Single-mode (OS1/OS2)■■Single-mode optic fibres performances:OS1/OS2 9/125.Meeting the markets needs for allsingle-mode applications.■■Low Water Peak and PMD. Optimized to decreasethe signal attenuation between 1260 to 1625nmallowing for multiplexing (modern optical transmissiontechnologies like DWDM).P119619P119618Full Spectrum FibreAttenuation850 1300 1550 nmWave length58 | Actassi Network Connectivity Jan 2013

OS210 Gigabitsmax 10 km3500/500Supports all kindsof network applications1500/500500/500OM410 Gigabitsmax 550 mOM310 Gigabitsmax 300 mOM210 Gigabitsmax 82 mOM110 Gigabitsmax 33 mMultimode fibreSinglemode fibreApplications Wavelength OM1 62,5/125 µm OM2 50/125 µm OM3 50/125 µm OM4 50/125 µm OS2 9/125 µmOverfilled Bandwidth(MHz.km)OFL 850/1300 nm 200/500 500/500 1500/500 3500/500 -Fibre channel:4Gbit/s(FC4)8Gbit/s(FC8)VCSEL 850 nmVCSEL 850 nm- - - 400 m200 m10 km10 km100 Gbit/s 16Gbit/s (FC16) VCSEL 850 nm - - 100 m**130 m150 m **10 km40 Gbit/s IEEE 802.3ba - - 100 m* 150 m* 10 km10 Gbit/s (10GBASE-SR/SW)10 Gbit/s (10GBASE-LX4)10 Gbit/s (10GBASE-LRM)10 Gbit/s (10GBASE-LR/LW)10 Gbit/s (10GBASE-ER/EW)VCSEL 850 nmLASER 1300 nmLASER WDM 1300 nmLASER 1310 nmLASER 1550 nm33 m 82 m300 m220 m--300 m300 m220 m--550 m300 m220 m-----10 km40 km1 Gbit/s (1000BASE-SX)1 Gbit/s (1000BASE-LX)VCSEL 850 nmLASER 1300/1310 nm275 m550 m550 m550 m1000 m550 m1100 m600 m-5 km100 Mbit/s (100BASE-SX)100 Mbit/s (100BASE-LX)VCSEL 850 nmLASER 1300/1310 nm300 m2000 m300 m2000 m300 m2000 m300 m2000 m->20 km* Request a minimum of 8 fibres cores for 4x10 Gbit/s paralel optic** Request a minimum of 20 fibres cores for 10x10 Gbit/s paralel opticNetwork Connectivity Jan 2013Actassi | 59

Actassi fibre optic cablesActassi Fibre LAN range is adapted to the familiar ways of installing optic connectorsand pigtails (SC, LC, ST). The range is available under 2 different structures: Tightbuffered and Loose tube to be used for direct connector termination and for splicingrespectively. Both structures are suitable for indoor and specific outdoor installations.Loose tubeTight buffered6752423318181Robust sheathTensile strengthReinforces the tensilestrength of the cable.RobustnessHigh maximum pulling forceand crush resistance of thecable during installation.UV resistanceResistance to UVdegregation.ColoursDistinct colours to identifystrategic cables and preventmistakenly cutting the cable.2 Water swellableelementsProvide a protective barrieragainst longitudinallywater ingression whileguaranteeing cableperfomance.3 100% glass yarnsReinforcing the tensilestrength of the cable. Actingas rodent retardant.4 Innovative designInnovative design of dualloose tube structure tohelp simplify the installation.5 GelProvides a protective barrieragainst longitudinall wateringression while guaranteeingcable perfomance.Coating250 µm coating678900 µm coatingCompact for improvedbending radiusThe compact design ofthe cables gives severalbenefits:• Reduced bending radii:10 x diameter for Tightbuffered and 60 mm forLoose tube cables• Reduced diameter andincreased installationspacePackagingPackagingadapted to ourcustomers requests (convenientsmall sized drumsor cut to length).Colour codeFibre n°1 to n°12 according to the following colours.1 Blue2 Orange3 Green4 Brown5 Grey6 White7 Red8 Black9 Yellow10 Violet11 Rose12 AquaFibre n°13 to n°24: idem + transparent60 | Actassi Network Connectivity Jan 2013

Environment-friendlyLSZHLSZH (Low Smoke Zero Halogen) sheath according to test methodsIEC 61034 (smoke density), IEC 60754-1 (gas toxicity), IEC 60754-2(gas corrosiveness) for Tight buffered and Loose tube cables.Flame retardantFlame retardant (self extinguishing) according to IEC 60332-1 forTight buffered and Loose tube cables.Fire retardantFire retardant (no fire propagation along the cable) accordingto IEC 60332-3C for Tight buffered cables.RoHS and REACHRoHS compliance according to UE directive.REACH compliance.PeP available for the range.

Actassi FibreFL-C Fibre optic cablesRange Loose tubeFL-C Loose tube Fibre optic cablesSpecifications■■Compact and universal cables suitable for indoor and specific outdoorinstallations:– Low Smoke Zero Halogen (LSZH) green coloured external sheath– UV resistant– dielectric– high tensile strength– rodent retardant– longitudinally watertight■■Maximum pulling force: 1500 Newton (1800 Newton for 24FO)– longitudinally watertight■■Rodent protection:■■Minimum bending radius: OD x 10 (ex: 62mm for 6,2mm OD)■■Ambiant air temperature (minimum & maximum)– for installation: -5° … +50°C– for operation: -20°… +70°– for storage: -40° … +70°■■Loose tube gel-filled cable construction with 250 µm coating available in unitubestructure for 4, 6, 8 and 12 fibres and bitube structure for 24 fibres.■■Flame retardant according to IEC 60 332-1, EN 50 265 2.1, NFC 32 070 2.1(Category C2)Performances■■OM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 andISO/IEC 11801:2011 Ed2.2 OM2.■■OM3 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.2 andISO/IEC 11801:2011 Ed2.2 OM3.■■OM4 50/125 compliant with IEC 60793-2-10 Type A1a.3,ISO/IEC 11801:2011 Ed2.2 OM4.■■OS1/OS2 9/125 compliant with ITU G.652.D, IEC 60793-2-50 Type B1.3,ISO/IEC 11801:2011 Ed2.2 OS2.■■Cable mechanical characteristics tested according to IEC 60794-1Use■■High data rate fibre optic backbones for building and campus■■Suitable for splicing termination: installation with pigtails by fusion or mechanicalsplices.OM2 50/125 µmType Length Diameter Ref. NoOptic cable Indoor/outdoor OM2 50/125 µm multimode fibres, green overall jacket.4 fibres OM2 50/125, Loose tube,Up to 10Gbps ethernet supported2100 m 6,2mm VDIC52204LVDIC52204L6 fibres, OM2 50/125, Loose tube,Up to 10Gbps ethernet supported525 m2100 m6,2mmVDIC42206LVDIC52206LVDIC52206L8 fibres, OM2 50/125, Loose tube,Up to 10Gbps ethernet supported2100 m 6,2mm VDIC52208LVDIC52212L12 fibres, OM2 50/125, Loose tube,Up to 10Gbps ethernet supported525 m2100 m6,2mmVDIC42212LVDIC52212LVDIC52224L24 fibres, OM2 50/125, Loose tube,Up to 10Gbps ethernet supported525 m2100 m6,2mmVDIC42224LVDIC52224LVDIC52224LNote: OM1 62,5/125 fibre cable available on request for legacy installation, already using 0M1fibre core. Support up to 1Gbps ethernet62 | Actassi Network Connectivity Jan 2013

Actassi FibreFL-C Fibre optic cablesRange Loose tubeOM3 50/125 µmType Length Diameter Ref. NoOptic cable Indoor/outdoor OM3 50/125 µm multimode fibres, green overall jacket.OM3 50/125, Loose tube, 6 fibresUp to 10Gbps ethernet supported525 m2100 m6,2mmVDIC42306LVDIC52306LVDIC52306LOM3 50/125, Loose tube, 12 fibresUp to 40Gbps ethernet supported525 m2100 m6,2mmVDIC42312LVDIC52312LVDIC52312LOM3 50/125, Loose tube, 24 fibresUp to 100Gbps ethernet supported525 m2100 m7,2mmVDIC42324LVDIC52324LVDIC52324LOM4 50/125 µmType Length Diameter Ref. NoOptic cable indoor/outdoor, OM4 50/125 µm multimode fibres, green overall jacket.6 fibres, OM4 50/125, Loose tube,Up to 10Gbps ethernet supported2100 m 6,2mm VDIC52406LVDIC52406L12 fibres, OM4 50/125, Loose tube,Up to 40Gbps ethernet supported2100 m 6,2mm VDIC52412LVDIC52412L24 fibres, OM4 50/125, Loose tube,Up to 100Gbps ethernet supported2100 m 7,2mm VDIC52424LVDIC52424LOS1/OS2 9/125 µmType Length Diameter Ref. NoOptic cable indoor/outdoor, OS1/OS2 9/125 µm single-mode fibres, green overall jacket.4 fibres, OS1/OS2 9/125, Loose tube,Up to 100Gbps ethernet supported2100 m 6,2mm VDIC52504LVDIC52504L6 fibres, OS1/OS2 9/125, Loose tube,Up to 100Gbps ethernet supported525 m2100 m6,2mmVDIC42506LVDIC52506LVDIC52506L8 fibres, OS1/OS2 9/125, Loose tube,Up to 100Gbps ethernet supported2100 m 6,2mm VDIC52508LVDIC52508L12 fibres, OS1/0S2 9/125, Loose tube,Up to 100Gbps ethernet supported525 m2100 m6,2mmVDIC42512LVDIC52512LVDIC52512L24 fibres, OS1/0S2 9/125, Loose tube,Up to 100Gbps ethernet supported525 m2100 m7,2mmVDIC42524LVDIC52524LVDIC52524LNetwork Connectivity Jan 2013Actassi | 63

Actassi FibreFL-C Fibre optic cablesRange Tight bufferedFL-C Tight buffered Fibre optic cablesSpecifications■■Compact and universal cables suitable for indoor and specific outdoorinstallations:– Low Smoke Zero Halogen (LSZH) green coloured external sheath– UV resistant– dielectric– high tensile strength– rodent retardant– longitudinally watertight■■Maximum pulling force: 1500 Newton (1800 Newton for 24FO)■■Rodent protection:■■Minimum bending radius: OD x 10 (ex: 51mm for 5,1mm OD)■■Ambiant air temperature (minimum & maximum):– for installation: -5° … +50°C– for operation: -20°… +70°– for storage: -40° … +70°■■Tight buffered gel-free cable construction with 900 µm coating.■■Flame retardant according to IEC 60 332-1, EN 50 265 2.1, NFC 32 070 2.1(Category C2). Fire retardant according to IEC 60 332-3 C, EN 50 266,NFC 32 070 2.2 (Category C1)Performances■■OM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 andISO/IEC 11801:2011 Ed2.2 OM2.■■OM3 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.2 andISO/IEC 11801:2011 Ed2.2 OM3.■■OM4 50/125 compliant with IEC 60793-2-10 Type A1a.3,ISO/IEC 11801:2011 Ed2.2 OM4.■■OS1/OS2 9/125 compliant with ITU G.652.D, IEC 60793-2-50 Type B1.3,ISO/IEC 11801:2011 Ed2.2 OS2.■■Cable mechanical characteristics tested according to IEC 60794-1Use■■High data rate fibre optic backbones for building and campus■■Horizontal cable (FTTD Fibre to the desk) with the 2 fibres■■Suitable for direct termination: installation with connectors (prefibred, cold-curedand/or heat-cured types).OM2 50/125 µmType Length Diameter Ref. NoOptic cable Indoor/outdoor OM2 50/125 µm multimode fibres, green overall jacket.4 fibres, OM2 50/125, Tight buffered,Up to 10Gbps ethernet supported2100 m 4,6mm VDIC52204TVDIC52204T6 fibres, OM2 50/125, Tight buffered,Up to 10Gbps ethernet supported525 m2100 m5,1mmVDIC42206TVDIC52206TVDIC52206T8 fibres, OM2 50/125, Tight buffered,Up to 10Gbps ethernet supported2100 m 5,7mm VDIC52208TVDIC52208T12 fibres, OM2 50/125, Tight buffered,Up to 10Gbps ethernet supported525 m2100 m6,7mmVDIC42212TVDIC52212TVDIC52212T24 fibres, OM2 50/125, Tight buffered,Up to 10Gbps ethernet supported525 m2100 m8,8mmVDIC42224TVDIC52224TVDIC52224T64 | Actassi Network Connectivity Jan 2013

Actassi FibreFL-C Fibre optic cablesRange Tight bufferedOM3 50/125 µmType Length Diameter Ref. NoOptic cable Indoor/outdoor OM3 50/125 µm multimode fibres, green overall jacket.2 fibres, OM3 50/125, Tight buffered,Up to 10Gbps ethernet supported525 m2100 m4,8mmVDIC42302TVDIC52302TVDIC52302T6 fibres, OM3 50/125, Tight buffered,Up to 10Gbps ethernet supported525 m2100 m5,1mmVDIC42306TVDIC52306TVDIC52306T12 fibres, OM3 50/125, Tight buffered,Up to 40Gbps ethernet supported525 m2100 m6,7mmVDIC42312TVDIC52312TVDIC52312T24 fibres, OM3 50/125, Tight buffered,Up to 100Gbps ethernet supported525 m2100 m8,8mmVDIC42324TVDIC52324TVDIC52324TOM4 50/125 µmType Length Diameter Ref. NoOptic cable indoor/outdoor, OM4 50/125 µm multimode fibres, green overall jacket.6 fibres, OM4 50/125, Tight buffered,Up to 10Gbps ethernet supported2100 m 5,1mm VDIC52406TVDIC52406T12 fibres, OM4 50/125, Tight buffered,Up to 40Gbps ethernet supported2100 m 6,7mm VDIC52412TVDIC52412T24 fibres, OM4 50/125, Tight buffered,Up to 100Gbps ethernet supported2100 m 8,8mm VDIC52424TVDIC52424TOS1/OS2 9/125 µmType Length Diameter Ref. NoOptic cable indoor/outdoor, OS1/OS2 9/125 µm single-mode fibres, green overall jacket.6 fibres, OS1/OS2 9/125, Tight buffered,Up to 100Gbps ethernet supported on longdistance525 m2100 m5,1mmVDIC42506TVDIC52506TVDIC52506T12 fibres, OS1/OS2 9/125, Tight buffered,Up to 100Gbps ethernet supported on longdistance525 m2100 m6,7mmVDIC42512TVDIC52512TVDIC52512T24 fibres, OS1/OS2 9/125, Tight buffered,Up to 100Gbps ethernet supported on longdistance525 m2100 m8,8mmVDIC42524TVDIC52524TVDIC52524TNetwork Connectivity Jan 2013Actassi | 65

Actassi fibre optic patch cordsActassi fibre optic patch cords ensure a reliable transmission in data networks. Theyare available with several types of connectors (SC, LC), from multimode (OM1, OM2,OM3, OM4) to single-mode (OS1) performances, in different lengths to cover all installationneeds.All fibre optic patch cords are compliant with ISO/IEC 11801:2011 Ed2.2 and providesafe plug & play with a high quality thanks to the performances, the LSFRZH sheath(LSZH with fire retardant properties) and the warranties.LSFRZH sheath.Fire retardant material withlow smoke emissions andnon-toxic gases in case of fireColour coding ofsheathColour coding ofconnector bodyDuplexbraceletIndividual test reports with insertion and return loss value for each patch cord supplied.66 | Actassi Network Connectivity Jan 2013

Actassi FibreFL-C Fibre optic patch cordsRangeSpecifications■■Optic patchcords suitable for patching within technical rooms and at workstationbetween passive and active equipments:- Factory terminated- 100% optically tested- Delivered with insertion loss report tests- Zirconia ceramic material ferrules- Available in OM1, OM2, OM3, OM4 performances- Available with ST, SC and LC types of connectors- 2mm coloured sheath for a quick and easy identification of performances- Low Smoke Zero Halogen (LSZH) sheath■■Flame retardant according to IEC 60 332-1, EN 50 265 2.1, NFC 32 070 2.1(Category C2). Fire retardant according to IEC 60 332-3 C, EN 50 266, NFC 32 0702.2 (Category C1)Performances■■SC connectors compliant with TIA/EIA 604-3 and IEC 61754-4 Ed. 2■■LC connectors compliant with TIA/EIA 604-10A and IEC 61754-20 Ed. 2■■ST connectors compliant TIA/EIA 604-2 and IEC 61754-2■■OM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 and ISO/IECOM2 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.1 andISO/IEC 11801:2011 Ed2.2 OM2.■■OM3 50/125 compliant with ITU G.651, IEC 60793-2-10 Type A1a.2 andISO/IEC 11801:2011 Ed2.2 OM3.■■OM4 50/125 compliant with IEC 60793-2-10 Type A1a.3,ISO/IEC 11801:2011 Ed2.2 OM4.■■OS1/OS2 9/125 compliant with ITU G.652.D, IEC 60793-2-50 Type B1.3,ISO/IEC 11801:2011 Ed2.2 OS2.■■Cable mechanical characteristics tested according to IEC 60794-1P67826Fibre Optic Patch cords OM2 50/125Type Length Ref. NoOptic Patch cord SCd/SCd LSZH1 m2 m3 m5 mVDIP542331VDIP542332VDIP542333VDIP542335P67819Optic Patch cord LCd/SCd LSZH1 m2 m3 m5 mVDIP542351VDIP542352VDIP542353VDIP542355P67818Optic Patch cord LCd/LCd LSZH1 m2 m3 m5 mVDIP542551VDIP542552VDIP542553VDIP542555P67828Optic Patch cord ST/ST LSZH1 m2 m3 m5 mVDIP542111VDIP542112VDIP542113VDIP542115P68922Fibre Optic Patch cords OM3 50/125Type Length Ref. NoOptic Patch cord SCd/SCd LSZH1 m2 m3 m5 mVDIP543331VDIP543332VDIP543333VDIP543335P68921Optic Patch cord LCd/SCd LSZH1 m2 m3 m5 mVDIP543351VDIP543352VDIP543353VDIP543355P68920Optic Patch cord LCd/LCd LSZH1 m2 m3 m5 mVDIP543551VDIP543552VDIP543553VDIP543555Network Connectivity Jan 2013Actassi | 67

Actassi FibreFL-C Fibre optic patch cordsRangeP68920Fibre Optic Patch cords OM4 50/125Type Length Ref. NoOptic Patch cord LCd/LCd LSZH1 m2 m3 m5 mVDIP544551VDIP544552VDIP544553VDIP544555P67820Fibre Optic Patch cords OS1/OS2 9/125Type Length Ref. NoOptic Patch cord SCd/SCd LSZH1 m2 m3 m5 mVDIP545331VDIP545332VDIP545333VDIP545335P67817Optic Patch cord LCd/SCd LSZH1 m2 m3 m5 mVDIP545351VDIP545352VDIP545353VDIP545355P67816Optic Patch cord LCd/LCd LSZH1 m2 m3 m5 mVDIF0626463501VDIF0626463502VDIF0626463503VDIF062646350568 | Actassi Network Connectivity Jan 2013

Actassi FibreFL-C Fibre optic connectorsRangeFL-C Fibre optic Cold cured and Heat cured connectorsbbCold cured optic connectors combining the quick-cure convenience of anaerobic adhesivewith the performances of epoxy and polish connectors for installations inside opticpatchpanels and/or at workstation.- Requires less than 4 minutes to assemble and polish the connector- Does not require electrical power to install- Hand polishbbThe anaerobic adhesive uses a two-part epoxy process. The adhesive is first injected intothe connector ferrule. The fiber is dipped into the primer and inserted into the connector.Curing takes one minute without the use of lamp or oven. Then the fiber of the connectorrequires manual polishing through different grades of sand papers.bbHeat cured connectors can be used according to installations standards of cold curedconnectorsCold cured connectors- Connectors delivered with boots for 900 µm, 2- and 3mm jacketed cables, crimp rings for2- and 3mm jacketed cables ( and 1,6mm for LC version)- Color coding for easy identification of performances (both black and aqua boots forMultimode, blue boot for singlemode)- Zirconia ceramic material ferrulesHeat cured connectors- Connectors delivered with boot for 900 µm cables (beige boot for Multimode, blue boot forsinglemode)- Zirconia ceramic material ferrulesPerformancesbbSC connectors compliant with TIA/EIA 604-3 and IEC 61754-4 Ed. 2LC connectors compliant with TIA/EIA 604-10A and IEC 61754-20 Ed. 2ST connectors compliant with TIA/EIA 604-2 and IEC 61754-2P67209Connectors multimodeType Qty/pack Ref. NoCold cured Connector MM 50/125 SC 1 VDIB502201CCold cured Connector MM 50/125 ST 1 VDIB501201CP67215Cold cured Connector MM 50/125 LC 1 VDIB504201CHeat cured Connector MM 50/125 SC 100 VDIB502201HP133687Heat cured Connector MM 50/125 ST 100 VDIB501201HHeat cured Connector MM 50/125 LC 100 VDIB504201HP133690Connectors singlemodeType Qty/pack Ref. NoCold cured Connector SM 50/125 SC 1 VDIB502501CCold cured Connector SM 50/125 LC 1 VDIB504501CHeat cured Connector SM 9/125 SC 100 VDIB502501HP133685P133689Heat cured Connector SM 9/125 LC 100 VDIB504501HNetwork Connectivity Jan 2013Actassi | 69

Actassi FibreFL-C Fibre optic pigtailsRangeFL-C Fibre optic pigtailsSpecificationsbbOptic pigtails suitable for splices termination with fibre optic cables inside optic patchpanelsand/or at workstation:- Factory terminated- Zirconia ceramic material ferrules- 900 µm fibre buffered- Low Smoke Zero Halogen buffer sheath- 70 cm lengthPerformancesbbSC connectors compliant with TIA/EIA 604-3 and IEC 61754-4 Ed. 2LC connectors compliant with TIA/EIA 604-10A and IEC 61754-20 Ed. 2ST connectors compliant with TIA/EIA 604-2 and IEC 61754-2P68987Pigtail multimodeTypePigtail OM2 50/125 SCPigtail OM2 50/125 STPigtail OM2 50/125 LCPigtail OM3 50/125 SCRef. NoVDIP642201VDIP642101VDIP642401VDIP643201Pigtail OM3 50/125 LCPigtail OM4 50/125 LCPigtail singlemodeTypePigtail OS2 9/125 SCPigtail OS2 9/125 LCVDIP643401VDIP644401Ref. NoVDIP645201VDIP645401P6898570 | Actassi Network Connectivity Jan 2013

Actassi fibre optic panelsA simple all- in-one concept, pre- equipped with for example Quick Fix function, coilingwheels and cable glands. It has a capacity of 24 fibres and has transparent lids forprotection and a clear visibility of the inside. Can hold up to 4 cover plates, and since itis delivered with 3 blank plates, the choice is open for the fourth to be used accordingto your needs. The cover plates are available in empty and pre- equipped versions withadapters.To match your fibreoptic panel we havedeveloped a range ofpre- equipped coverplates.It’s a time -saving,safer and smarterway to work with yourinstallations.Coiling wheelsThe panel containswheels to keep the fibresin place and to avoid tensionon the connectors.This will also give a correctbending radius andmore space for excesslengths of the fibres.Excellent protectionThe transparent coversgive both protection andoverview. The front coverscan be opened forquick access and the topcover is easily removed.Clear markingSince the marking is veryclear, identify ing the cableyou are looking for willnever be a problem.Integrated guidingpanelA patchcord guidingpanel, with smoothlyshaped edges to protectthe cords, is integrated inthe panel. So there is noneed to add a separateguiding panel that wouldtake another 1U space.Rear quick fixationA quick-fixation system isprovided for the cables atthe rear. Use the provided16 mm glands for cables.If a 21mm gland (notprovided) is needed, justremove the rear plasticsupport and fix the glanddirectly in the cable entry.Quick and easy!Sliding functionThe panel can be slidedor completely removedfor a more convenientworking position.Network Connectivity Jan 2013Actassi | 71

Actassi Fibre19-C Fibre optic panelsRangeEvolution universal sliding fibre optic panel 1U■■Universal sliding 19" fibre optic panel with 4 positions, equipped with 3 blankplates. The 1st position is empty and is to be fitted with suitable coverplate.■■1 Quick Fix function on both sides to allow a simple, quick fixing position andsliding feature.■■Removable transparent cover mounted.■■Fibre patchcord guiding structure at the front, protected by cover equipped withlabel holders.Evolution panel for direct terminations■ ■ Equipped with 2 coiling wheels and 2 PG9 (Ø 7 mm max.) cable glands.DescriptionEvolution Fibre optic panel 1U with 3 blank plates for directterminationsReferenceVDIG150991VDIG150991Evolution panel for splices■■Equipped with one coiling wheel, 2 PG9 (Ø 7 mm max.) cable glands and onesplicing cassette (without splice holder).DescriptionEvolution Fibre optic panel 1U with 3 blank plates, for splicesReferenceVDIG150991001VDIG150991001VDIM15C112Splicing optic cassette■■Delivered with a cover.■■Capacity up to 24 fibres. Recommended for 12 fibres.■■2 cassettes can be stacked inside the 1U fibre optic panel.DescriptionFibre optic splicing cassette with coverReferenceVDIM15C11272 | Actassi Network Connectivity Jan 2013

Actassi Fibre19-C Fibre optic panelsRangeP110463Coverplates with adaptersDescriptionCoverplate provided with 3 SC duplex multimode adaptersReferenceVDIM1530311P110460Coverplate provided with 6 ST multimode adaptersVDIM1510611P110459Coverplate provided with 3 LC duplex multimode adaptersVDIM1550311P110153Coverplates without adaptersDescriptionCoverplate for 3 SC duplex adaptersReferenceVDIM153031P110154Coverplate for 6 ST adaptersVDIM151061P110155Coverplate for 3 LC duplex adapters(compatible with LC duplex Adapters / square VDIB6051001,VDIB6051002, VDIB6052001 and VDIB6052002).VDIM155031P120601Coverplate for 6 LC duplex adapters(compatible with LC duplex Adapters / rectangular VDIB6051003,VDIB6051004, VDIB6052003 and VDIB6052004).VDIM155061P110152Blank plateDescriptionBlank plate for fibre optic panelReferenceVDIM150061P112926Internal fixing plate for 1 adapter MPO to be fixed at the rear of the panelDescriptionReferenceInternal fixing plate for 1 adapter MPOVDIM157021Network Connectivity Jan 2013Actassi | 73

Actassi FibreFibre LAN adaptersRangeAdapters■■Fibre optic adapters suitable to connect and align optic connectors (for bothapplications: optic patchpanels in technical rooms and faceplates atworkstation).- Both multimode and singlemode versions- Identification of multimode adapters with beige color- Identification of singlemode adapters with blue color- Available in SC, SC APC, ST, LC and MPO formats- Zirconia ceramic material ferrules- Snap-in latchMultimode (MM) adaptersType Qty/pack Ref. NoSC Duplex Adapter MMSC Duplex Adapter MM1100VDIF212410VDIB6031002SC Simplex Adapter MM 1 VDIB6021001ST Simplex Adapter MM 1 VDIB6011001ST Simplex Adapter MM 100 VDIB6011002LC Duplex Adapter sq MMLC Duplex Adapter sq MM1100VDIB6051001VDIB6051002LC Duplex Adapter rect MMLC Duplex Adapter rect MM1100VDIB6051003VDIB6051004Singlemode (SM) adaptersType Qty/pack Ref. NoSC Duplex Adapter SMSC Duplex Adapter SM1100VDIF212430VDIB6032002SC APC Simplex Adapter SM 1 VDIB6072001SC APC Duplex Adapter SM 1 VDIB6082001LC Duplex Adapter sq SMLC Duplex Adapter sq SM1100VDIB6052001VDIB6052002LC Duplex Adapter rect SMLC Duplex Adapter rect SM1100VDIB6052003VDIB6052004MPO AdapterType Qty/pack Ref. NoMPO Adapter 1 VDIB612300174 | Actassi Network Connectivity Jan 2013

Network Connectivity Jan 2013Actassi | 75

Enclosures for Indoor needsWall-mountedFloor-standing76 | Actassi 04.2012 Network Connectivity | Network Connectivity Jan 2013

Actassi EnclosuresActassi wall-mounted enclosuresKDB 19" enclosure................................................................................................... 83OPB 19" OpenBox enclosure........................................................................ 89Actassi floor-standing enclosuresBTR 19" Technical rack....................................................................................... 98VDA 19" Cabling enclosures.......................................................................... 99Data Center Patching Frame....................................................................... 102VDS 19" Server enclosure............................................................................. 103Actassi 19-E Universal Accessories............................................................... 106Earth connection.................................................................................................... 108Fixing components............................................................................................... 108Shelves ............................................................................................................................ 109Cable management.............................................................................................. 110P & S 19" Customisation service...................................................................... 113Technical info....................................................................................................................... 114Network Connectivity | Jan 04.2012 2013Actassi | 77

Actassi EnclosuresWith the Actassi system you can create a seamless end-to-end network connectivitysolution for all needs. There are different conditions and demands on the installationsin buildings, data centres and small offices. That is why Actassi includes all possiblesizes of wall-mounted and floor-standing enclosures, from 6 to 47 units in differentwidths, depths, colours and compositions. You can always find an Actassi enclosurethat gives a perfect result.Do you want to haveother enclosures thanstandard? No problem.With Actassi enclosuresit's possible to customizecolour, accessories,specific lining etcaccording to yourpersonal needs.The Digital Rule helps you select productsHard to select the Actassi enclosures, RJ45connectors, patch panels and cables? Visitschneider-electric.com and try our Digital Rule. It’san intelligent online e-catalogue which will facilitateyour choices and ensure an error-freespecification.78 | Actassi Network Connectivity Jan 2013

Actassi wall-mounted enclosuresThe Actassi wall-mounted OPB OpenBox enclosures allow you to easily integrate patchpanels, cables, switches and digital recorders. All the lining can be removed withouttools, and with the swing-rack version of OPB, with a quick-locking system, you’ll getaccess to the connections from the back to handle the maintenance in a convenientway. Too hot in the enclosure? No problem, it’s easy to integrate a blanking plate withtwo fans.Network Connectivity Jan 2013Actassi | 79

Actassi wall-mountedenclosures – addingvalue while savingspaceNew, space-savingknock-down boxes.Easy to stock, carryand assemble .80 | Product Name 01.2011 | Part of Portfolio

Streamline cost, size and capacitySometimes things are not what they seem. Can a small, easily manageable box reallyprovide sufficient capacity? Yes – Actassi wall-mounted enclosures can supportconnectivity for up to 144 workplaces. The enclosures are also suitable for distributedsolutions in larger applications, such as office buildings and hospitals.Actassi wall-mountedenclosures are ideal fornetwork, telephone,security and audio/videoapplications.Regardless the line of business, it lies in everyowner’s interest to optimise the work conditions– without spending a mere fortune on unusedcapacity. When it comes to supplying the workarea with safe and reliable access to network anddata, wall-mounted enclosures offer great, spacesavingopportunities that can make a significantdifference for the operative everydaywork.Network Connectivity Jan 2013Actassi | 81

Capacity and versatility,straight from the wallA well thought-out infrastructure is the best way to provide for a problem-free, reliableusage. Take a look at the pictures to the left. Both illustrate realistic, adequateexamples of how to make best use of a wall-mounted enclosure, used as a singleunit or a distributed solution.All Actassi wall-mountedenclosures are certifiedin compliance with thedirective RoHs, with the19” standard IEC60297-3-100 and EIA-310-E.Rather than investing in hefty, oversizedenclosures, you can benefit from flexible wallmountedenclosures and get true convenience interms of small size and impressive capacity. Notto mention the advantages in store for the installer,whether the enclosure is to be used as a singleunit or as a distributed solution. Mounting andinstalling, as well as maintaining and extendingover time – with thorough planning, everything iscarried out with minimum effort.19" standard for 6-21U heightsActassi wall-mounted enclosures are available intwo versions – KDB and OPB. Both are made tomatch the full Actassi range of 19" panels andaccessories. This ensures an effective highdensitysolution, always with the adequate height.Actassi KDB, height 15UActassi OPB with plain sheet steel door, 9UActassi KDB with fans and brush gasket, 9UActassi OPB with Securit ® glass door, 9U82 | Actassi Network Connectivity Jan 2013

Thumbs up for knock-down boxes– ideal for smaller businessesImagine providing excellent equipment for network, telephone, security and audiovideo while saving up to 60% on stock space. Add smart benefits like the flat packageand the exceptional mounting time of 5 minutes, and you have the major advantagesof the KDB enclosure in a little box.Actassi KDB knock-down boxA sturdy, robust enclosure made of welded sheetsteel, with great opportunities for several kinds ofinstallations, would probably lead to quite timeandspace-consuming mounting and installation.Not the Actassi KDB knock-down boxes Thekeyword is “easy”.Easy to stock, assemble and manageLet’s start with the package. The clever flat packwill help save up to 60% on storage space. It’seasy to stock – just grab a couple of packagesfrom the shelf, load them into the your car and youare ready to go.On site, the enclosure can be put up, wallmountedand prepared for the components in justa few minutes. In addition, there are a number ofhandy features that provide equal easiness: thetool-less door with spring hinges for optimisedaccess to the patch panels, the brush panel forswift cable management and the fan plates forsmart ventilation.Save 60% on stock spaceThe KDB enclosure is easy tostock and load. The flat packallows you to save up to 60%on space, which means youcan make more installationsin less time.5 minutespersontool11Actassi KDB enclosureoffers exceptionalsimplicity in termsof mounting andinstallation. One personcan have the KDB set upin less than 5 minutes.And the only tool neededis a regular screwdriver.Network Connectivity Jan 2013Actassi | 83

84 | Product Name 01.2011 | Part of Portfolio

Secure maximised capacity andswift maintenance for vital needsTime for adjustments? Just open the sides and fold out the swing rack. Replaceand add whatever parts you need, no tools are necessary. Fold back the rack, closethe sides and you are done. To increase the flexibility of the entire installation, usethe Actassi OPB as a distributed solution.The Actassi OPB servesperfectly as a distributedsolution. In a hospital forinstance, the need forquick, reliable and easilyexpandable networkconnectivity can becrucial.Actassi OPB – open for installationThe Actassi OPB is wide open for a swift andstruggle-free installation. Steady as a rock, evenwith the side panels and the door dismounted.The swing rack makes all the differenceWhen making the first installation, as well ascontinuous upgrades, you will find that theswing rack makes all the difference for you asan installer. Access from all sides, pre-cut cableentries and minimum usage of tools are some ofthe other features that make the OPB truly openfor installation and maintenance.Side panels are easilyremoved without tools.Easy to install usingfixing points.Pre-cut cable entryfrom both top andbottom.Door easily mountedand removed withouttools.Both sides areopenable.Securit ® safety glass door.Key lockSide panel is openedand locked from theinside.Quick-lock, 1/4-turnnuts.Swing rack for easyinstallation and maintenance.Gradual 25 mmdepth adjustment.Network Connectivity Jan 2013Actassi | 85

Actassi EnclosuresKDB19" Wall Knock-Down BoxSimple and space-saving5 minutesYou need only fiveminutes to mount theActassi KDB enclosure.Easy to stock and shipThe flat-pack architectureof KDB saves 60% ofspace in the stock. It isalso very easy to ship andcarry.Easy to assembleThe symmetric constructionof the top, bottom and sidepanels gives easy and safeassembling.Easy to useTool-less door with springhinges facilitates the accessto the patch panels.Easy to assemble. Youonly need one singletool. A drilling templatefacilitates the fixation onthe wall.40 kgThe body allows mountingof components up to 40kg.Easy to manage thecables (option)Use the 19” brush panelto manage the entry ofcables in a safe way in thetop and bottom.Smart ventilation(option)Secure the installed componentslike switches andPABX. Use the 19” smartfan plates equipped witha thermostat adjustablefrom 0° to 55°cEasy to adaptIf you need more space atthe front of the enclosure,you can easily move the19” uprights each 25 mm.86 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresKDB19" Wall Knock-Down BoxSimple and space-savingIntroduction and selection guides60%The flat-pack saves 60%of space in the stock■■Flat-pack wall-mounted enclosure dismounted in 1 package■■Symmetric enclosure made from welded sheet steel, powder-painted, leather-grainfinish, RAL 7035 light grey epoxy-polyester.■■Enclosure made up of a body, one pair of 19" fixed uprights and a Securit ® glasstransparent door with key nº 333.■■Top and bottom 19” Knock-down plates for entry cables and fans – 0U■ ■ Ingress Protection : IP20– Object size protected against > 12,5mm– No liquid protected■■Impact Protection : IK08– Impact energy = 5 joules■■Acceptable load: 3 kg/U; max. 40 kg per enclosure.(Include 25% of margin load rating according to the IEC 62208)■■Certifications : In compliance with the directive RoHs, with the 19" standardIEC60297-3-100 and EIA-310-E■■Brush entry cables NSYCRTM1U1PS (in option)■■Smart fan NSY1FAN230T to manage the temperature from 0° to 55°c (in option)Number of U Height Width Depth Enclosure Brush entry cables Smart fan6U 352 600 400 NSYKDB6U4F9U 485 600 400 NSYKDB9U4F12U 618 600 600 NSYKDB12U6F15U 752 600 600 NSYKDB15U6FNSYCRTM1U1PSNSY1FAN230TNetwork Connectivity Jan 2013Actassi | 87

Actassi EnclosuresKDBThermal managementSmart and Basic fans■■19” fan plate– 0U on top and bottom of the box– 3U fixed on the 19” uprights■■Equipped with 1 or 2 fans– 90 CFM for each one (155m 3 /h)– 230V – AC– Plugs IEC14 to power– In: Socket IEC C14 - To be powered with IEC C13 plug power cable■■Delivered without cableSmart fans■■Equipped with 1 adjustable thermostat 0° to 55°C■■Equipped with 1 led switch On/OffBasic fans■■WITHOUT thermostat and switchSmart fans Type Reference1 Fan NSY1FAN230T2 Fans NSY2FAN230TBasic fans Type Reference1 Fan NSY1FAN2302 Fans NSY2FAN230Cables for smart & basic fan plates■■Black power cables of 3m to power the fan platesPlug Out Plug In ReferenceIEC C13 IEC C14 NSYIEC13IEC1488 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresOPB19" Wall Open BoxErgonomic and adaptableActassi OPB isassembled at delivery,ready to useEasy to installThe Actassi OPB enclosurecan be wall-mountedby a single person usingthe fixing points intendedfor the passage of holdingscrew heads into the wall.ErgonomicsThe side panels swingthrough 120º and can beeasily removed withouttools. Rear access is easy.Door easily removablewithout tools.Easy to cableThe cable entries, top orbottom, are pre-cut andopen into the rear of theActassi OPB enclosure.The enclosure fits aroundthose cables that arealready in place (rearblanking plate optional).Side panels , swing rackand door can be openedand removed withouttools. Quick and easy.50 kgThe body allowsmounting of componentsup to 50 kg.AdaptableThe 19" uprights aredesigned to be depthadjustablewith a step of25 mm. Their fixing withscrews guarantees therigidity of the Actassi OPBenclosure.Easy to install and toreverseIts drilling template on thepackaging and its 4 wallmountingpoints enablequick and efficient installationwhile guaranteeingreversibility by simply turningthe enclosure around.ErgonomicsThe side panels arelocked from the inside bytwo 1/4-turn nuts, accessibleonly when the dooris open.Network Connectivity Jan 2013Actassi | 89

Actassi EnclosuresOPB19" Wall Open Box with swing rackOpen for easy installation and maintenanceIntroduction and selection guides■■Wall-mounting enclosure made from folded and welded sheet steel, powder paint,leather-grain finish, RAL 7035 light grey epoxy-polyester.■■Enclosure made up of a body, 2 hinged and removable side panels, a 19" swingrack and a Securit ® glass transparent door with key nº 333.■■Ingress Protection : IP20– Object size protected against > 12,5mm– No liquid protected■■Impact Protection : IK08– Impact energy = 5 joules■■Available enclosures :– 5 heights: 6, 9, 12, 15, 18 U.– 3 depths: 400, 500 and 600 mm.■■Swing rack: Acceptable load of 25 kg. (Include 25% of margin load ratingaccording to the IEC 62208)■■Certifications : In compliance with the directive RoHs, with the 19" standardIEC60297-3-100 and EIA-310-ETotal accessibility withthe swing rack and theswingable and removableside panels and door.Installed enclosuresNumber of UDimensions (mm)Height Width DepthEnclosurereferenceBlankingplate6 380 600 400 NSYOPB6U4P NSYOPB6UTPN9 515 600 500 NSYOPB9U5P NSYOPB9UTPN12 650 600 500 NSYOPB12U5P NSYOPB12UTPN15 780 600 600 NSYOPB15U6P NSYOPB15UTPN18 915 600 500 NSYOPB18U5P NSYOPB18UTPNCable-gland platewith brush gasketNSYECP300Blanking platewith 2 fansNSYECVT30090 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresOPB19" Wall Open Box with fixed rackErgonomic and adaptableIntroduction and selection guides■■Wall-mounting enclosure made from folded and welded sheet steel, powder paint,eather-grain finish, RAL 7035 light grey epoxy-polyester.■■Enclosure made up of a body, 2 hinged and removable side panels, 19" fixeduprights and a Securit ® glass transparent door or plain sheet steel door withkey nº 333.■■Ingress Protection : IP20– Object size protected against > 12,5mm– No liquid protected■■Impact Protection : IK08 (for glazed door)– Impact energy = 5 joules■■Impact Potection : IK10 (for plain door)– Impact energy = 20 joules■■Available enclosures:– 6 heights: 6, 9, 12, 15, 18, 21 U.– 3 depths: 400, 500 and 600 mm.■■Fixed 19" rack. Acceptable load: 3 kg/U; max. 50 kg per enclosure. (Include 25%of margin load rating according to the IEC 62208)■■Certifications : In compliance with the directive RoHs, with the 19" standardIEC60297-3-100 and EIA-310-E2U extra space "for free",1U in the top and 1U in thebottom. Can be used forexample for power rails.Installed enclosuresNumber of UDimensions (mm)Height Width DepthEnclosure referenceBlanking plate6 380 600 400 NSYOPB6U4F NSYOPB6UTPN9 515 600 500 NSYOPB9U5F NSYOPB9UTPN12 650 600 500 NSYOPB12U5F NSYOPB12UTPN15 780 600 600 NSYOPB15U6F NSYOPB15UTPN18 915 600 500 NSYOPB18U5F NSYOPB18UTPN21 1050 600 500 NSYOPB21U5F NSYOPB21UTPNCable-gland plate withbrush gasketNSYECP300Blanking plate with2 fansNSYECVT300Network Connectivity Jan 2013Actassi | 91

Actassi EnclosuresOPB19" Mobile Open BoxFlexible and versatileMade for audiovisual applicationTechnical characteristics■■The body of the enclosure has cut-outs at the top and bottom to allow naturalventilation.The cables can enter through the rear opening and through the pre-cut areas onthetop and bottom surfaces of the enclosure.■■4 cut-outs are provided for wall-mounting.■■The 2 side panels can be opened very easily by means of two 1/4-turn nuts.These panels can be removed, without tools.■■The 19" uprights in zinc-coated steel are depth-adjustable on a 25 mm step.■■The Securit ® glass door is completely reversible. It is equipped with a handle and alock with closure by key nº 333. It is easily dismountable without tools.■■Certifications : In compliance with the directive RoHs, with the 19" standardIEC60297-3-100 and EIA-310-EComposition■■Actassi OPB with top and bottom cut-outs.■■1 glazed front door with a lock, key nº 333.■■1 rear plate, reference: NSYOPB6UTPN to NSYOPB21UTPN.■■4 depth-adjustable 19" uprights. Additional uprights available.■■4 castors, reference NSYRUFOPB.■■Option of installing a plinth instead of the castors.92 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresOPBMounting accessoriesRear blanking plate■■Blanking plate made from sheet steel, powder paint, leather-grain finish,RAL 7035 light grey epoxy-polyester.■■Delivered with the fixings required for installation.NSYOPB6UTPNNumber of UReference6 NSYOPB6UTPN9 NSYOPB9UTPN12 NSYOPB12UTPN15 NSYOPB15UTPN18 NSYOPB18UTPN21 NSYOPB21UTPNAdditional 19" uprights■■Batch of two 19" uprights delivered with the fixings required for installation.■■Material: zinc-coated sheet steel, 20/10 mm thick.■■Maximum load: 3 kg/U; max. 50 kg per enclosure.■■Unit marking.NSYOPB6UFNumber of UReference6 NSYOPB6UF9 NSYOPB9UF12 NSYOPB12UF15 NSYOPB15UF18 NSYOPB18UF21 NSYOPB21UF19" uprights, rear, 2 U■■Allows to save 2U on the front and to fix Power Distribution Unit on the back of theenclosure■■Batch made up of 2 partial 2 U 19" uprights delivered with thefixings required for installation.■■It is fixed to the rear of the enclosure.■■It allows the installation of products in 19" format.■■Height adjustment with a step of 44.45 mm (1 U).■■Material: zinc-coated sheet steel.NSYSSOPBNumber of UReference2 NSYSSOPBCable support for enclosure, rear■■Allows to secure and guide the cables on the back of the enclosure■■Fixed to the rear of the enclosure to support and fix the cables.■■Height adjustable with a step of 44.45 mm (1 U).■■Material: zinc-coated steel.■■Delivered with the fixings required for installation.Cable supportNSYSPBOPBNSYSPBOPBNetwork Connectivity Jan 2013Actassi | 93

Actassi EnclosuresOPBRoof accessoriesTop or bottom blanking plate■■Plain blanking plate.■■Material: zinc-coated steel sheet.■■Delivered with the fixings required for installation.NSYEC300ReferenceNSYEC300NSYECP300Blanking plate with brush gasket■■Fixing to the top or bottom openings of the enclosures.■■Material: zinc-coated steel sheet.■■Delivered with the fixings required for installation.Dimensions (mm)Reference35 x 300 NSYECP300Total brush gasket■■It is fixed to the top and bottom cable entries.NSYECPT300Dimensions (mm)Reference100 x 300 NSYECPT300NSYECAV300Top or bottom blanking plate withventilation louvres■■Fixing to the top or bottom openings of the enclosures.■■Material: zinc-coated sheet steel.■■Delivered with the fixings required for installation.ReferenceNSYECAV300Top or bottom blanking plate with 2 fans■■2 fans installed and wired to on the terminal block, including a protection grille. Apower supply cable of 2 m in length is supplied connected.■■Free flow of 35 m 3 /h each.■■Fixing to the top or bottom openings of the enclosures.■■Material: zinc-coated sheet steel.■■Delivered with the fixings required for installation.■■Sound level: 35 dB (A).■■Thermostat NSYCRTM1UVTG (option)NSYECVT300ReferenceNSYECVT30094 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresOPBBase accessoriesLevelling feet■■Delivered with the fixings required for installation.■■Require drilling of the enclosure at the knock-out point for direct installation.■■Batch of 4 parts.NSYPNOPBReferenceNSYPNOPBWheels■■Delivered with the fixings required for installation.■■Require drilling of the enclosure at the knock-out point for direct installation.■■Installation possible on the plinth.■■Batch of 4 parts.NSYRUFOPBReferenceNSYRUFOPBPlinths■■Material: sheet steel, 15/10 mm thick, powder paint, leather grain finish,RAL 7011 dark grey epoxy-polyester.■■Height 100 mm.■■Delivered with the fixings required for installation.■■Removable surfaces.■■Knock-out entries on the side and rear surfaces for cable entry.NSYZUN65OPBDimensions (mm)WidthDepthReference600 400 NSYZUN64OPB600 500 NSYZUN65OPB600 600 NSYZUN66OPBBrush gasket for the cable entriesthrough the plinth■■It is fixed to the knock-out areas for the cable entries.■■Delivery as a unit.NSYJPSVDEntry width (mm)Reference75 x 400 NSYJPSVDWall-mounting kit for the enclosures■■Allows wall-mounting of enclosures from 6 U to 29 U, with a depth of 600 mm.■■Maximum load inside the enclosure: 50 kg.■■The kit includes 2 brackets.■■Maximum load inside the rack: 100 kg.00Enclosure depth (mm)ReferenceSCALE 0.100SCALE 0.100 SCALE 0.100600 NSYCFRS595250NSYCFRSNetwork Connectivity Jan 2013Actassi | 95

Actassi EnclosuresOPBEquipment supportsPartial fixed slides■■Allows to support the back of the 19" switch, PABX or server in usingonly 2 19" uprights■■Batch of 2 slides for supporting a drawer, a shelf or 19" hardware.■■Fixing by attachment on the front 19" uprights.■■Material: zinc-coated steel.■■Acceptable load: 15 kg.Width (mm)Reference140 NSYGF140OPBNSYGF140OPBFixed slides■■Allows to support heavy switch, PABX or server in using 4 19" uprights■■Batch of 2 slides for supporting a drawer, a shelf or 19" hardware.■■Fixing by attachment between the front and rear 19" uprights.■■Material: zinc-coated steel.■■Heel of 0 mm.■■Acceptable load: 15 kg.Centre-to-centre distance (mm)Reference200 NSYGF200OPBNSYGF200OPBRear cable support on 19" uprights■■Fixing to the rear of the 19" uprights to support the cables.■■Material: zinc-coated steel.■■Delivered with the fixings required for installation.ReferenceNSYSRCOPBNSYSRCOPB96 | Actassi Network Connectivity Jan 2013

Actassi floor-standing enclosuresAre you looking for an enclosure that is robust and very quick to install? Actassi VDAshould be your choice. Smart details and a possibility to choose pre-installed accessoriesreduce the installation time. If you need a top-of-the-line server enclosure, ActassiVDS is difficult to beat. It can be mounted with up to 750 kg of 19” components, andthe micro-perforated door ensures superior air flow (above 80%).Actassi BTRTechnical rackActassi VDA-BCabling enclosureActassi VDSServer enclosureNetwork Connectivity Jan 2013Actassi | 97

Actassi EnclosuresBTRTechnical rackTempory installationIntroductionHeights of 24 U and 42 UApplications■■Test rack.■■Mixing rack.■■Prototype rack.To be made up of■■1 steel plinth, 600 × 600 mm.■■Two 19" uprights, height of 24 or 42 U.■■1 steel cross rail delivered with the 19" uprights.■■The fixings required for installation delivered with the 19" uprights.Advantages■■Shorter assembly time.■■Simple handling of the unit by a single operator.■■Reduced storage space.■■Minimum external dimensions.■■Quick coupling.■■Option of installing handling castors.■■Option of installing 19" accessories:- Shelves with a depth of 600mm.- Support plates- Guides■■Acceptable static load: 150 kg.■■Certifications : In compliance with the directive RoHs, with the 19" standardIEC60297-3-100 and EIA-310DNº of usable U Batirack plinth ref. 19" upright and cross-rail kit24 U NSYZUN66BTR NSYBTR24U42 U NSYZUN66BTR NSYBTR42U98 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresVDAEasy to install and to integrate19" Cabling enclosureAdaptableThe Configured offer allowsyou to clad the rackaccording to your needs:• 2 framework models,• 13 door models,• 2 side panel models.Aesthetics andcustomisation• bi-colour: RAL 7035light grey and RAL 7011dark grey,Saves timeAll the doors can beinstalled and removedquickly. The cladding canbe installed and removedby a single operator. Thefeet can be adjusted fromthe inside.Rigidity andsturdiness400 kg of acceptablestatic load.Network Connectivity Jan 2013Actassi | 99

Actassi EnclosuresVDAEasy to install and to integrate19" Cabling enclosureInnovatingThe side cable entry isthe most ergonomic andefficient solution on themarket. The top and bottomopenings, flush withthe structure, allow thestrands to be preparedbefore installing the rack.These openings also allowfor easy maintenanceand are closed when theside panels are installed.ErgonomicsThe routing of the cableglands is easier:• Knock-out side cableglands at top and bottom.• Knock-out rear cableglands at top and bottom.• Large opening on theroof, offset towardsthe rear and equippedwith a removable plate.Allows the integrationof live equipment at thetop and the entry ofcables by the rear.• Large opening at thebottom.AccessoriesThe central openings onthe roof and the basesupport multiple blankingplate combinations (plain,with brush gasket orventilated).Optional installation ofthe blanking plates withthe roof plate thanks tothe roof stand-offs.Panels and doors can beinstalled and removedquickly by a singleoperator.PB501534A harmonious designWith modern aesthetics:strip, handle, hinge, inrounded shape, RAL7011 dark grey.SecurityThe latches of the panelscan be equipped with akey locking system (thekey is identical for all thedoors).SmartThe pivot and guide systemallows the panels tobe returned to their placequickly, with maximumsecurity.The ventilation is adjustableand does not take up anyunits (1 to 9 fans).PracticalMarking of the units onthe front panel and on theside for quick installationof the equipment. The 19"uprights are easily depthadjustableon the site.Adaptable ventilationThe roof ventilation isdepth-adjustable anddoes not take up anyunits.Option of installing 1 to9 fans according to thesize of your enclosure.100 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresVDA-BSimple and functionalIntroductionVDA-B rack■■Designed for circulation applications with switches and routers.■■6 heights: 24 U, 29 U, 33 U, 38 U, 42 U and 47 U.■■2 widths: 600 and 800 mm.■■3 depths: 600, 800 and 1000 mm.■■Acceptable static load: 400 kg.■■Dynamic load: 250 kg.■■Color :– Light Grey (RAL7035) for lining– Dark Grey (RAL7011) for framework■■Ingress Protection : IP20– Object size protected against > 12,5mm– No liquid protected■■Impact Protection : IK08– Impact energy = 5 joules■■Certifications : In compliance with the directive RoHs, with the 19" standardIEC60297-3-100 and EIA-310DRack composition■■Top and bottom frames, mechanically assembled by Torx screws to the verticalstructure uprights, thus forming a rigid framework.■■Cut-out roof, closed with a removable blanking plate.■■Glazed reversible front door, 4 mm Securit ® glass, opening to 180°, 1-point lockwith a key n° 333. Hinges on the right as standard.■■Rear panel with quick installation and removal, locking by latches.■■Side panels with louvres, with quick installation and removal, locking by latches.■■Top and bottom side cable glands flush with the structure.■■Top and bottom side knock-out areas for cable entry, with a width of 800 mm.■■Large opening on the bottom and large knock-out area on the rear for cableentry.■■Levelling feet installed.■■Two 19" uprights made from treated steel, installed 100 mm back from the frontsurface and depth-adjustable in steps of 25 mm.■■Delivered on a pallet covered with film.Composition of the rack without side panels■■Exactly the same composition as the above rack, but without the side panels.■■Coupling kit not supplied.VDA-B racks, RAL 7035 Light GreyNumberof UHeight(mm)Width(mm)Depth(mm)Rack with sidepanels19" uprights 100-mm plinth Handling castorsCable-glandtrim24U 1200 600 600 NSYVDA24U66B NSYBR9F24 NSYZUN66VDA NSYRUFVDA -24U 1200 600 800 NSYVDA24U68B NSYBR9F24 NSYZUN68VDA NSYRUFVDA -42U 2000 600 600 NSYVDA42U66B NSYBR9F42 NSYZUN66VDA NSYRUFVDA -42U 2000 600 800 NSYVDA42U68B NSYBR9F42 NSYZUN68VDA NSYRUFVDA -42U 2000 800 600 NSYVDA42U86B NSYBR9F42 NSYZUN66VDA NSYRUFVDA NSYPV4242U 2000 800 800 NSYVDA42U88B NSYBR9F42 NSYZUN88VDA NSYRUFVDA NSYPV4242U 2000 800 1000 NSYVDA42U810B NSYBR9F42 NSYZUN810VDA NSYRUFVDA NSYPV4247U 2200 800 800 NSYVDA47U88B NSYBR9F47 NSYZUN88VDA NSYRUFVDA NSYPDV47Network Connectivity Jan 2013Actassi | 101

Actassi EnclosuresData Center Patching FrameRangeOverhead 19" Patching Frame 4U■■19” frame■■Designed to be mounted in a mesh tray or cable ladder to provide 4U patchingpositions and to save space in the enclosure below.■■4U height.■■In compliance with the directive RoHS and with 19” standards EIA 310-D and IEC60297-3-100.■■CE certified.■■Metal.■■Dimensions: 500mm x 350mm x 160mm.■■Color is Raven Black.■■Holds up to 15 Kgs.■■Equipped with two cord managers that secure the bend radius of the cords goingdown to the enclosure, It includes 4 self-grip of 30cm.■■Equipped with a big label holder to facilitate readiness from the ground.DescriptionOverhead 19” patching frame 4U*ReferenceVDIM33174VDIM33174Example of mountingStand-alone mounting Mounting in a cable ladder Mounting at the bottom of amesh trayMounting on the side of amesh tray with a quick fittingdevice102 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresVDS19" server enclosureRobust and ventilatedVentilated:The front and rear doorsare microperforatedon the width of the 19"uprights to channel the airflows onto the equipment.They allow above 80% ofair through for optimumventilation of the livecomponents that equipthe 19" rack.Rigidity androbustness:750 kg of acceptablestatic load.Vertical cable manager(as option)Efficient vertical cablemanagers can be usedto duct, support and hidefibre and copper cables inimproving airflow.Adaptation andcustomisation:The configured offer allowsyou to clad the rackaccording to your needs:• 2 framework models.• 13 door models (microperforateddouble door,etc.).• 2 side panel models.Network Connectivity Jan 2013Actassi | 103

Actassi EnclosuresVDS19" server enclosureRobust and ventilatedThe ventilation isadjustable and does nottake up any units (1 to9 fans).Innovating:The side cable entry isthe most ergonomic andefficient solution on themarket.The top and bottomopenings, flush withthe structure, allow thestrands to be preparedbefore installing the rack.These openings also allowfor easy maintenanceand are closed when theside panels are installed.Ergonomic:The routing of the cableentries is easier:• Side cable entries at topand bottom, pre-cut.• Rear cable entries at thebottom, pre-cut.• Large opening on theroof, offset towards therear and equipped with ablanking plate.• Allows the integration oflive equipment at the topand the entry of cablesfrom the rear.• Large opening at thebottom.Adaptable ventilation:The roof ventilation isdepth adjustable anddoes not result in theloss of any units. Optionof installing 1 to 9 fansaccording to the size ofyour enclosure.Security:The latches of the panelscan be equipped with akey locking system (thekey is identical for all thedoors).Smart:The pivot and guide systemallows the panels tobe returned to their placequickly, with maximumsecurity.Practical:Marking of the units onthe front panel and on theside for quick installationof the equipment. The 19"uprights are easily depthadjustableon the site.Panels and doors can beinstalled and removedquickly by a singleoperator.Saves time:All the doors and panelscan be installed andremoved quickly. Thecladding can be installedand removed by a singleperson. The feet can beadjusted from the inside.Accessories:The central openings onthe roof and the basesupport allow multipleblanking plate combinations(plain, with brush orventilated).Possibility of installing theblanking plates with theroof plate thanks to theroof stand-offs.104 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresVDS19" serverRobust and ventilatedIntroductionTechnical characteristics■■Folded and welded sheet-steel enclosure, textured, RAL 9011 blackepoxy-polyester powder paint.■■Earth continuity guaranteed, according to the standard.■■Allowed air flow above 80%■■Acceptable static load: 750 kg.■■Color:– Black (RAL9011)■■Ingress Protection : IP20– Object size protected against > 12,5mm– No liquid protected■■Impact Potection : IK10– Impact energy = 20 joules■■Certifications: In compliance with the directive RoHs, with the 19" standardIEC60297-3-100 and EIA-310DRack composition■ ■ Top and bottom frames, mechanically assembled by Torx screws to the verticalstructure uprights, thus forming a rigid framework.■■Base without blanking plate (page XX).■■Cut-out roof, closed with a blanking plate with dismountable brush gasket.■■Reversible microperforated front and rear door, opening to 180°, closure at 2 pointswith a handle and a key nº 333. Hinges on the right as standard.■■Side panels with no louvres, with quick installation and removal, closing by latches.■■Top and bottom side cable entries flush with the structure.■■Top and bottom side knock-out areas for cable entry, with a width of 800 mm.■■Large opening on the bottom and large knock-out area on the rear for cable entry.■■Levelling feet installed.■■Four 19" uprights made from treated steel, installed 100 mm back from the frontplate and depth-adjustable in steps of 25 mm.■■Earthing kit installed.■■Delivered on a pallet covered with film.Composition of the rack without side panels■■Exactly the same composition as the above rack, but without the side panels.■■Coupling kit not supplied.■ ■ In the event of coupling, use coupling kit ref. NSYCUNVDA and brush gasket (ref.NSYCUNPL600, NSYCUNPL800 or NSYCUNPL1000) to close the cable entry leftby the 2 side panels.Selection guideNumber of UExt. dimensions (mm)Height Width DepthRack24U 1200 600 1000 NSYVDS24U610N42U 2000 600 1000 NSYVDS42U610N42U 2000 800 800 NSYVDS42U88N42U 2000 800 1000 NSYVDS42U810NNetwork Connectivity Jan 2013Actassi | 105

Actassi EnclosuresVDA/VDSAccessoriesEA accessoriesLocking system (P1)■■Allows the closure of a side panel and the rear panel.■■Lock with key n° 333 with escutcheon plate.■■It is installed on the opening latches of the side and rear panels.■■Delivery of 2 locks per panel.NSYSTVDAReferenceNSYSTVDACoupling kit (R1)■■Kit to be used when coupling two racks side by side.■■Kit made up of 4 flanges and the fixings required for assembly.ReferenceNSYCUNVDANSYCUNVDAVertical trim strips with cable entries (H2)■■For enclosures with a width of 800 mm only.■■Side cut-outs allowing the entry of cables every 250 mm. Knock-out entries on thefront plate every 250 mm.■■Assembly on the framework uprights providing aesthetic continuity between theframework and the 19" uprights positioned at least 100 mm away from the door.■■RAL 7011 dark grey paint.■■Cable-protection strips (not supplied) to be ordered separately. Seepage XX.■■Dismounting by 1/4-turn screws.■■Kit made up of 2 trim strips.Number of U42UReferenceNSYPV42NSYPV42Handling wheels (M3)■■Batch of 4 swivel castors, 2 of which are equipped with a locking system.■■Direct fixing under the bottom frame of the rack by M12 screws.■■Height of the castors: 105 mm.Acceptable loadReference250 kg/4 castors NSYRUFVDANSYRUFVDA106 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresVDA/VDSEA accessoriesRoof and base accessoriesInstallation supportsPlain blanking plate (J1) (K1)■■Fixing on the internal surface of the base or roof.■■Can be combined with other types of blanking plates.■■Treated sheet steel.■■Delivered with the fixings required for installation.NSYEC440ReferenceNSYEC440Blanking plate with brush gasket (J2) (K2) (L1)■■Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of thereduced rear door.■■Can be combined with other types of blanking plates.■■Treated sheet steel.■■Delivered with the fixings required for installation.NSYECP440Dimensions (mm)Reference75 x 400 mm NSYECP440NSYECVT2V440Blanking plates with or without fansØ 120 mm (J3) (J4) (L2) (L3)■■Fixing on the internal surface of the base or roof or on a 6 U knock-out panel of thereduced rear door.■■Equipped with 2 fans, free flow of 170 m 3 /h each, 220 V-50/60 Hz, installedwired with terminal board. A 3-m power cord is supplied, installed.■■Can be combined with other types of blanking plates.■■Treated sheet steel.■■Delivered with the fixings required for installation.■■Noise level: 34 dB (A).■■To use fans with UK PDU’s, order UK adaptor Ref : NSYAPUFRUKWith 2 fansDimensions (mm)ReferenceNSYECVT2V440Additional 19" uprights■■Assembly on the depthwise supports.■■Depth adjustable in steps of 25 mm.■■Kit made up of 2 uprights and the fixings required for assembly.■■9.5-mm square holes in the front panel.Number of U24U42UReferenceNSYBR9F24NSYBR9F42NSYECVT2V424 /NSYECVT2V440Network Connectivity Jan 2013Actassi | 107

Actassi EnclosuresUniversal accessoriesEarth connectionFixing componentsEarthing kit for Actassi OPB / VDC■■To earth all the covering components.ReferenceNSYCTOPBNSYCTOPBEarthing kit for Actassi VDA / VDS■■Kit for earthing the cladding pieces of the enclosure.■■Assembly on all the doors of the enclosure to comply with standard IEC62208,Section 9.10 regarding the continuity of the protection circuit.■■Brass and copper lugs.■■Green-yellow PVC insulating sheath.Note: It is up to the installer to make sure earth continuity and the earth connections areguaranteed.ReferenceNSYCTVDAFixings for 19" rack■■They allow 19" accessories to be mounted.■■Caged nut compatible with 8.5 x 8.5 mm and 9.5 x 9.5 mm holes.Batch of Name Reference50M6 screws + washers +nutsNSYGFR95M65NSYGFR95M65108 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresUniversal accessoriesShelvesFixed perforated and plain 19" trays, 1 U■■Fixing by attachment without tools between the front and rear 19" uprights.■■Sheet steel or RAL 7016 grey paint.■■Acceptable load: 100 kg.NSYBBF1U40PG / NSYBBF1U60PGRack depth (mm)Fixing centre-to-centredistance (mm)References of RAL 7016perforated 19" trays600-800-1000 258 (1) NSYBBF1U40PG800-1000 458 (1) NSYBBF1U60PG(1) –100 ...+50 mm, adjustable in steps of 25 mm.Telescopic perforated and plain 19" trays, 1 U■■Fixing by attachment without tools between the front and rear 19" uprights.■ ■ Fixing on the telescopic slides supplied.■ ■ Sheet steel or RAL 7016 grey paint.■ ■ Acceptable load: 45 kg.NSYBBT1U40PG / NSYBBT1U60PG /NSYBBT1U80PGRack depth (mm)Fixing centre-tocentredistance (mm)(1) Slides delivered with the tray.(2) –100 ...+50 mm, adjustable in steps of 50 mm.References of RAL 7016perforated 19" trays600-800-1000 258 (1) NSYBBT1U40PG800-1000 458 (1) NSYBBT1U60PG1000 658 (1) NSYBBT1U80PGHandle for telescopic 19" tray■■Plastic material, RAL 7011 dark grey.■■Delivered with fixings.NSYASR3UReferenceNSYASR3U1 U fixed 19" tray■■Fixing to the front or rear uprights of the 19" rack.■■Heel of 5 mm.■■Sheet steel or RAL 7016 grey paint.■■Acceptable load: 2 U 20 kg.NSYBF2U25PGNumber of U Depth (mm) Load (kg) Reference RAL 70162U 250 20 NSYBF2U25PG2 U telescopic 19" tray■■Fixing to the front uprights of the 19" rack.■■Sheet steel or RAL 7016 grey paint.■■Acceptable load: 5 kg.■■Delivered with the telescopic slides assembled.■■Heel of 5 mm.NSYBT2U25PGNumber of U Depth (mm) Load (kg) Reference RAL 70162U 250 5 NSYBT2U25PGNetwork Connectivity Jan 2013Actassi | 109

Actassi EnclosuresUniversal accessoriesCable managementThermal-management1 U 19" front panels with metal guides■■Channels the cables over the front panel of the rack.■■Fixing to the 19" rack.■■Sheet steel, RAL 7016 grey paint.NSYCRTM1U32BNumber of guidesVert.Horiz.RAL 7016 cable-guidereference4 0 NSYCRTM1U40BGNSYCRTM1U2G1 U 19" front panel with cable-gland openings■■Fixing on the 19" uprights.■■Openings protected by a gasket.■■Sheet steel RAL 7016 grey paint.RAL 7016 referenceNSYCRTM1U2G1 U 19" front panels with cable-gland and brush gasket■■Fixing on the 19" uprights.■■Sheet steel RAL 7016 paint.■■150 mm cable support.NSYCRTM1U1PTypeWith cable support at the rearRAL 7016 referenceNSYCRTM1U1PGNSYCRTM1U5GCA1 U 19" front panel with insulating guides■■Channels the cables over the front panel of the rack.■■Fixing on the 19" uprights.■■Steel front panel, RAL 7035 light grey paint.■■Equipped with 5 guides (reference NSYGCA46) in horizontal, vertical and 45°positions.ReferenceNSYCRTM1U5GCA1 U 19" front panel with ventilation switch and thermostat■■Direct fixing to the 19" rack.■■Switch with LED.■■Thermostat 0 ... +60 °C, In 5 A/250 V.■■Front panel made from RAL 7016 sheet.NSYCRTM1UVTGReference RAL 7016NSYCRTM1UVTG110 | Actassi Network Connectivity Jan 2013

The customised offerDo you want to have other enclosures than standard? No problem. With Actassi enclosuresit's possible to customize colour, accessories, specific lining etc according toyour personal needs.Two levels of customisationAt Schneider Electric we have developed two levels of customised services based onmore than 50 years of experience in the market:> Configured offer (standard, modified)> Specific offer (custom-built enclosures)FlexibilitySeveral types ofside panelsSafetyDefined thermalmanagementTime-savingFactory suiteassembliesWe perform machining,mounting of accessoriesand painting.We manufacturecustomised solutionswith our industrial tools.Example: cut-outs madebefore painting..AestheticsColourMountingAccessoriesmounted in ourfactoriesEfficiency & ergonomicsSeveral types of doorsNetwork Connectivity Jan 2013Actassi | 111

Examples of customised solutionsConfigured offerConfiguredMake your own definition based on our standardcladdings.Example: Actassi VDS enclosure in RAL 9011Equipped with:• Double Front door with two-points locking system.Airflow above 80%• Double Rear door with two-points locking system.Airflow above 80%• Two side-doors with locks• Roof equipped with 6 fans and 1 brush-entry cablesSpecific offerBuilt exactly according to your needsSpecificExample: Actassi VDAOne specific VDA enclosure splitted in four compartments toallocate different cabling zones to different customers.This enclosure is delivered equipped, machined and readyto use.112 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresP&S CustomisationservicesCustomer-specific solutionsSpecificExample of realisationsColocation 19”enclosureEnclosure separated in 4parts to give differentaccess to each customer.Each hosted customerhas his own securedaccess and cannot makesome operation to theother part of theenclosureBranded 19” enclosureequipped with saloonglazed doors:Enclosure totallycustomized with thecustomer requirements.42U enclosure equippedwith double glazed doorspermits to open the doorswhen you don’t havespace.Ventilated 19”enclosure with fansmounted on the doors :Enclosure dedicated toextract a lot of heat.Mainly dedicated toserver application.This configuration permitsto ensure the stability ofthe installation19” enclosure – Depth400mm19” enclosure with a verylimited depth (Depth400mm) for cablingapplication.Required by the customerto reduce the size of theinstallation.Wall-mountedenclosure – Depth 1000mmEnclosure totallycustomized with thecustomer requirements.12U – Width 600mm andDepth 1000mm.Racks structure mergedwith a middle zonecabling:Totally dedicated forcabling, this structurepermits to easily managethe cables and to give thebest access to install thecomponents.Network Connectivity Jan 2013Actassi | 113

Actassi EnclosuresTechnicalinformationDegree of protectionStandard IEC 60364-5-51 lists and codifies a large number of external influences towhich electrical installations can be subjected, including the presence of water, solidobjects, shocks, vibrations, corrosive substances, etc.IP codeStandard IEC 60529 (IP code, February 2001) indicates the degrees of protectionprovided by an enclosure for electrical devices against access to hazardous parts,against penetration of solid foreign objects and against penetration of water.These standards do not apply for the protection against the risks of explosion orconditions such a humidity, corrosive vapour, fungus or vermin.The IP code is made up of two characteristic numerals and can include an additionalletter when the actual protection for persons against access to the hazardous parts isbetter than that indicated by the first numeral.The first numeral characterises the protection provided against the ingress of solidforeign objects and the protection of persons.The second numeral characterises the protection provided against the ingress ofwater with harmful effects.11 st numeral 2nd numeralProtection of persons1 Protected againstaccess with back ofhandProtection against ingress ofsolid objectsProtection againstsolid foreign objectslarger than 50 mm12 nd numeral Protection against ingress ofwaterProtected againstvertically drippingwater (condensation)2Protected againstaccess with a fingerProtection againstsolid foreign objectslarger than 12.5 mm2Protected againstdripping water up to15° from vertical3Protected againstaccess with a toolProtection againstsolid foreign objectslarger than 2.5 mm3Protected againstspraying water up to60° from vertical4Protected againstaccess with a wireProtection againstsolid foreign objectslarger than 1 mm4Protected againstsplashing water fromall directions56Protected againstaccess with a wireProtected againstaccess with a wireProtected against dust(dust protected)Dust tight56Protected againstwater jets from alldirectionsProtected againstpowerful water jetsfrom all directions7Protected against theeffects of temporaryimmersion in water8Protected against theeffects of continuousimmersion in water114 | Actassi Network Connectivity Jan 2013

Actassi EnclosuresTechnicalinformationIK codeStandard IEC 62262 defines an IK code characterising the capacity of products toresist mechanical impacts from all sides.IK codeImpact energy (joules)01 0.1402 0.203 0.3504 0.505 0.706 107 208 509 1010 20IK codes can be selected according to the risks of impacts on a given site.SiteRecommended IKNo risk of major impact Technical premises 07Significant risk of impact thatcan damage devicesMaximum risk of impact thatcan damage the switchboardHallwaysWorkshops 1008 (switchboard with door)Network Connectivity Jan 2013Actassi | 115

* Make the most of your energySchneider Electric South Africa (Pty) LTDCompany registration:1971/002841/071 River View Office ParkJanadel AvenueHalfway GardensMidrand, 1685Private Bag X139Halfway HouseMidrand, 1685Phone: +27 (0) 11 254 6400Fax: +27 (0) 11 254 6700www.schneider-electric.comDue to evolution of standards and equipment, the characteristics indicated in texts and images ofthis document do not constitute a commitment on our part without confirmation.© 2013 Schneider Electric. All rights reserved.DocRef: LS_NetCon_Cat_Jan-2013_RSAJanuary 2013