McAfee Data Loss Prevention 9.2.2 Product Guide

4Using McAfee DLP DiscoverManaging scans2 Type in a task name and select a Repository Type.3 From the Credential menu, select New, enter the authentication parameters needed to access therepository, and save the credential.4 From the Schedule menu, select New, set the scheduling parameters, and save the schedule.5 Select the scan Mode.6 Define the node to be scanned.7 Click the Filters tab.You must set the scan location manually if a URL is needed to access the repository.8 Click Browse.9 Select the repository from the directory tree in the repository.Define scan locations manuallyDefine scan locations manually if parameters are easier to set one by one.You can also browse to the location from the Filters tab.Parameters in the Advanced Options and Registration tabs can be entered before or after the location isidentified.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Classify | Discover Scan Operations | ScanOperations.• On your McAfee DLP appliance, select Classify | Discover Scan Operations | Scan Operations.2 In the Actions tab, select New.3 Type in a scan task name and select a Repository Type.4 If you have already created a credential, you can select it from the menu.If not, you can create one while you are configuring the scan. Click New, enter the authenticationparameters needed to access the repository, and click Save.5 If you have already created a schedule, or you want to use one of the default schedules, you canselect it from the menu.Click New, set the scheduling parameters, and click Save.6 Select the scan Mode.You can inventory the scan target, register the data at that location, apply policies and rules, orclassify the data.7 Define the node to be scanned using an IP address, host name, or URL.8 Click the Filters tab.9 Expand the Filter menu.10 Make selections from the menu categories to define the location of the scan.11 Click Save.96 McAfee Data Loss Prevention 9.2.2 Product Guide