McAfee Data Loss Prevention 9.2.2 Product Guide

5Integrating McAfee DLP EndpointControlling devicesAdd a device definition groupDevice definition groups can be used to control related devices.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Sys Config | Endpoint Configuration.• On your McAfee DLP appliance, select System | Endpoint Configuration.2 In the navigation pane under Device Management, select Device Definitions.The available devices appear in the right pane.3 Locate the Plug and Play Device Definition Group or Removable Storage Device Definition Group section.The Add Plug and Play Device Definition Group or Add Removable Storage Device Definition Group window appears.4 From the Actions menu, select Add New.5 Type in a name and optional description for the new device definition group.6 From the Device Definitions menu, select one or more device definitions from the available list.7 Click Save.Add a removable storage device definitionRemovable storage devices can be identified by the parameters that define them. For example, PCIvendor IDs and USB serial numbers are unique parameters that identify only a single device.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Sys Config | Endpoint Configuration.• On your McAfee DLP appliance, select System | Endpoint Configuration.2 In the navigation pane under Device Management, select Device Definitions, and locate the Removable StorageDevice Definition section.The available device definitions appear in the right pane.3 From the Actions menu, select Add New.The Add Removable Storage Device Definition window appears.4 Type in a name and optional description.5 Select a Parameter Name checkbox from the available list.The Edit Definition Parameter dialog box appears.6 Select or enter values that define the parameter.Click + to add additional parameters.7 Click Save.162 McAfee Data Loss Prevention 9.2.2 Product Guide