McAfee Data Loss Prevention 9.2.2 Product Guide

Integrating McAfee DLP EndpointTypical scenarios 52 Open an existing rule that defines data you want to protect, or add a new one.The Edit Rule page appears.3 From the Endpoint category, select Protect Screen Capture.The Enable pop‐up menu appears.4 Select the Enable checkbox and click Apply.5 From the Endpoint category, select Windows Title and type the text of the title.6 Click Save.When the title text is detected on a computer, the user will not be able to capture the image.Keep data from being printed on network printersIf the Network Printer rule is deployed and a directory server is added to McAfee DLP Manager, you canprevent LDAP users from printing sensitive data on network printers.Before you beginSome printers cannot be managed in this way, and must be defined on the Unmanaged PrinterModels page during the Endpoint Configuration phase.For example, if you suspect that network users on‐ and off‐site are attempting to print confidentialdocuments, you might use the following procedure to detect that activity, then notify the user that acompany policy against printing confidential documents has been violated and blocked.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Policies.• On your McAfee DLP appliance, select Policies.2 Click a policy and a rule, or create new ones.Make sure the policy is active and the Inherit Policy State state of the rule is set to Enabled.3 On the Add Rule or Edit Rule page, select Keyword from the Content menu and enter an identifying wordor phrase into the value field (for example, Confidential or Top Secret).If you know the document type, you might want to add another element (for example, Content Type isany of MS Word) to identify the content type.4 From the Source/Destination menu, select User Groups, and click ?.5 From the directory server pop‐up menu, click Find and click the appropriate user names, groups, ororganizations.6 Click Apply.7 From the Endpoint menu, select Network Printer, click ?, select the Enable checkbox, and click Apply.8 Click the Actions tab and Add Action, then select Printer Reaction from the Data‐in‐Use menu.McAfee Data Loss Prevention 9.2.2 Product Guide 135