McAfee Data Loss Prevention 9.2.2 Product Guide
McAfee Data Loss Prevention 9.2.2 Product Guide
McAfee Data Loss Prevention 9.2.2 Product Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Using <strong>McAfee</strong> DLP DiscoverConfiguring <strong>McAfee</strong> DLP Discover 4Table 4-24 Types of system status message (continued)Status message Definition RemedyShare (or Shares)InaccessibleSocket CommunicationFailureUnknownUnknown databaseUnsupported databaseversionA share might be inaccessiblebecause of insufficient userprivilege, or because the share isbeing used exclusively by anotherprocess.Could not establish a socketconnection to the database.This error is rare but might berelated to a configuration error.The login database given waswrong.<strong>Data</strong>base version on the repositoryis not supported.Select the Filters tab and try to browseto the share.Verify the IP address and port, thenrestart.Call <strong>McAfee</strong> technical support if theerror persists.Provide the correct login database,then restart.Check the documentation for thesupported version.Configuring <strong>McAfee</strong> DLP DiscoverBefore <strong>McAfee</strong> DLP Discover can be configured, it must be registered to <strong>McAfee</strong> DLP Manager, andpermissions must be set for users who will be setting up scans.Standalone installations of <strong>McAfee</strong> DLP Discover will auto‐register with the local <strong>McAfee</strong> DLP Managerafter product installation and startup. No separate registration is required.Registration to <strong>McAfee</strong> DLP Manager wipes the configuration on the Discover appliance. Only captureddata and incidents are retained.If you are going to prepare a standalone system for managed mode, you must do a backup to preservethe following user‐defined elements.• Scan tasks • Export locations• Schedules • Users and user preferences• Credentials • Custom rules and policies• Scan statisticsRegister <strong>McAfee</strong> DLP Discover to <strong>McAfee</strong> DLP ManagerYou must add <strong>McAfee</strong> DLP Discover to <strong>McAfee</strong> DLP Manager so that it can work in synchronization withother <strong>McAfee</strong> DLP devices. If it has functioned as a standalone machine, its configuration will bewiped.Configuring new rules on a managed <strong>McAfee</strong> DLP Discover device that has been registered to <strong>McAfee</strong>DLP Manager might take some time before it is ready for use. The registration process shouldcomplete within a few minutes, but it might take longer depending on the network load, useractivities, and other processes running on <strong>McAfee</strong> DLP Manager.Back up and recreate scan tasks and other user‐defined elements manually.<strong>McAfee</strong> <strong>Data</strong> <strong>Loss</strong> <strong>Prevention</strong> <strong>9.2.2</strong> <strong>Product</strong> <strong>Guide</strong> 125
Change language