McAfee Data Loss Prevention 9.2.2 Product Guide

Using McAfee DLP DiscoverRemediating incidents 4Review remedial actionsYou can review remedial actions that have been applied to an incident on the Incident Details page.Click Columns to add the three Rem columns to the dashboard.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Reporting | Incidents.• On your McAfee DLP appliance, select Incidents.2 Select Data‐at‐Rest from the display thumbwheel.3 Click Details for an incident.The Incident Details page appears.4 Review the remedial actions that have been applied.Add columns to display remedial actionsAdd columns to configure the Data‐at‐Rest dashboard to display remedial actions that have been appliedto incidents.If you make a mistake, you can move column headers out of the Selected list by selecting them andclicking Remove.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Reporting | Incidents.• On your McAfee DLP appliance, select Incidents.2 Select Data‐at‐Rest from the display thumbwheel.3 Click Columns, then scroll down the list of Available columns.4 Select one or more of the Remediation column headers:• RemActionRule• RemActionType• RemTaskStatus5 Click Add to move the column headers to the Selected list.6 Click the Move Up and Move Down buttons to position the columns on your dashboard.Moving column headers to the top of the window positions them on the right side of the dashboard.7 Click Apply.The Incidents dashboard displays the added columns.McAfee Data Loss Prevention 9.2.2 Product Guide 115