McAfee Data Loss Prevention 9.2.2 Product Guide

Using McAfee DLP DiscoverScan states 42 Select the radio button of the scan to be stopped.3 From the Actions menu, select Stop.Abort scansUse the Abort function to stop scans quickly.Before you beginScans that are to be aborted must be in a Running state.Abort immediately kills a running scan without completing processing of files already fetched by thecrawler. Some files might go missing due to the abrupt stop.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Classify | Discover Scan Operations | ScanOperations.• On your McAfee DLP appliance, select Classify | Discover Scan Operations | Scan Operations.2 Select the radio button of the scan to be aborted.3 From the Actions menu, select Abort.Rescan a repositoryRescanning might be needed after a scan is stopped, aborted, when policies are changed, or file filtersare updated.When a repository is rescanned, the saved manifest is destroyed. Rescanning might result in duplicateincidents.Task1 Select one of these options:• In ePolicy Orchestrator, select Menu | Data Loss Prevention | DLP Classify | Discover Scan Operations | ScanOperations.• On your McAfee DLP appliance, select Classify | Discover Scan Operations | Scan Operations.2 Select the radio button of the scan task you want to use to rescan the repository.3 From the Actions menu, select Rescan.Set bandwidth for a scanNo Throttling is the default for scanning, which means all available bandwidth will be used. But you canallocate only a portion of the spectrum to the scan by setting bandwidth limitations.Before you beginConsider the transmission capacity of your network and the amount of network trafficbefore deciding how much bandwidth to allocate to the scan.McAfee Data Loss Prevention 9.2.2 Product Guide 105