SAM4s ER-900 series Operators Manual.pdf

Not Found PLUThe “Not Found PLU” feature is available for use when an optional scanner is used to inputPLUs. If an item is scanned that is not programmed in the PLU file, the operator has theoption to input the price of the item and assign it the same descriptor and properties ofanother PLU, or enter the descriptor and tax status independently. This provides a simplemechanism for building an item file for a low-cost scanning installation.Not Found PLU: Quick EntryAction Display Notes1. Scan or input PLU NOT FOUND PLUSTOP:0 SAVE:12. Press 1 INPUT PRICEPRESS X/TIME key3. Enter the item price;press X/TIMESELECT COPY PLU4. Touch a PLU onKeyboard (or enter PLU# and press the PLU key)Not Found PLU: Detail EntryThe item is registered anddisplayedThe item is added to thePLU file with the price asentered and the descriptorand options of the PLU thatwas entered as the COPYPLU.Action Display Notes1. Scan or input PLU NOT FOUND PLUSTOP:0 SAVE:12. Press 1 INPUT PRICEPRESS X/TIME key3. Enter the item price;press X/TIMESELECT COPY PLU4. Enter 0; press PLU DESC5. Enter the item descriptor:press X/TIME.6. Enter the tax status (fromdigits N1 & N2 of thePLU Status Program)press X/TIME.TAXABLEThe item is registered anddisplayedYou must enter descriptorby descriptor code. (Ifusing Quick Entry, you canenter descriptors later usingthe PC Utility.)For example, enter 40 fortaxable by tax rate 1. Notethat the item is assigned bydefault to PLU Group 1.Not Found PLU ReportTurn the key lock to X or Z: enter 15 and press SUBTOTAL. Note: Up to 50 not foundPLU items can be retained. When capacity is reached, you must clear (Z) the Not FoundPLU report.86 • Operations SAM4s ER-900 Series Operator's & Programming Manual v.1.3