SAM4s ER-900 series Operators Manual.pdf

Clerk Sign-On/Sign-OffSee "System Option Programming” to review your clerk options: (System option #2 allowsyou to select direct or code entry sign on, option #3 allows you to select stay-down or pop-upoperation, and option #26 allows you select clerk interrupt operations.)Depending on how your register has been programmed, sign-on will take place only at thebeginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up).Normally, if your register has been programmed for stay-down clerks, the clerk currentlysigned on must be signed off before another clerk may be signed on. If you have selected theclerk interrupt option, a new clerk can be signed on in the middle of a transaction. In thiscircumstance, the initial transaction is suspended. When the interrupt transaction iscompleted, the suspended transaction can be continued.Check with your store manager to see which options have been selected for your register.Before any transaction may take place, a clerk must be signed on. Clerk sign-on isaccomplished in one of two ways:Direct Sign-OnIf the direct sign-on method is selected, enterthe clerk number and press the clerk key.CLERKClerk # (1-10)To sign the clerk off, enter 0 (Zero) and pressthe clerk key.DATE 06/14/2011 SUN TIME 08:37================================CLERK LOG IN================================CLERK 1 01CLERK LOG IN TIME 09:06CLERK 1 000001 000010 CLERKDATE 06/14/2011 SUN TIME 08:37================================CLERK LOG OUT================================CLERK 1 01CLERK LOG OUT 09:06CLERK 1 000001 00001SAM4s ER-900 Series Operator's & Programming Manual v.1.3 Operations • 41