SAM4s ER-900 series Operators Manual.pdf

To Execute a Diagnostic TestThe responses to the diagnostic commands are variable in content and not intended to beinterpreted by software. The printing of the diagnostic output is intended to have a humanoperator read the results that will be readily interpreted with the assistance of a Datacapsupport representative.1. From Z-Mode: Enter 513, press SBTL.2. Enter the diagnostic report number and then press CASH.Log File ReportZ-Mode: Enter 514, press SBTLThe “Log File Report” is available beginning a software version 1.014. This report recordseach time the “Issue Transaction” (report 506) is generated. When the “Log File Report”reaches 20 entries, the error message “Log File Full” is displayed when a “Issue Transaction”(report 506) is attempted. The “Log File Report” entries clear when the “Log File Report”(report 514) is taken.DAE 04/15/2007 WED TIME 08:27Z 1 REPORT 00007LAST REPORT 03/15/2007-------------------------------EFT TRANSACTION1 04.15.07 08:27GABRIELSTATUS ON1 04.15.07 15:14GABRIELSTATUS ON1 04.15.07 20:27GABRIELSTATUS ONCLERK 1 NO.000118 00001SAM4s ER-900 Series Operator's & Programming Manual v.1.3 Integrated Payment Appendix • 229