SAM4s ER-900 series Operators Manual.pdf

Program ScansSince much time and energy has been invested in the planning and programming of your ER-900, it is advisable to print a hard copy of the final program for future reference. This copyshould be kept in a safe place. (You can also save your program electronically, on a SD card.Go to “Program Backup and Restore” on page 106 to use this method.)1. Turn the control lock to the PGM position.2. To print a program scan, enter 1 5, press the SUBTL key.15 SUBTL3. Refer to the chart below and enter a digit to represent the segment of the programyou wish to print; press the X/TIME key.XX/TIMEX Program X Program0 Group 9 Financial Report message1 Tax 10 Clerk Report message2 System option 11 Macro Name3 Print option 12 Drawer Limit4 Function keys 13 Check Change Limit5 Clerk 14 Time & Date6 Preamble message 15 Tare Weight7 Postamble message 16 Machine Number8 Endorsement message 17 Mix & Match4. To read PLU program information, enter the number of the first PLU in a rangeof PLUs (up to 15 digits) that are to be scanned; press the PLU key. Enter thelast number in the range (up to 15 digits); press the PLU key, orPLUPLUPres the first PLU keys that are to scanned and Press the last PLU keys,PLUPLU5. To read MACRO information, press the MACRO key to be scanned,MACRO6. To read additional parts of the program, repeat from step 3, or press the CASHkey to finalize the program.CASH202 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3