SAM4s ER-900 series Operators Manual.pdf

Program 1600 - Machine Number ProgrammingThe machine number is printed on the register receipt. Program a machine number so thatany receipt or journal can be identified with the store or register where the transaction tookplace.Programming the Machine Number1. Turn the control lock to the PGM position.2. To begin the program, enter 1 6 0 0, press the SUBTL key.16 0 0 SUBTL3. Enter a machine number (up to 5 digits); press the X/TIME key.X/TIME4. Press the CASH key to finalize the program.CASHProgram 1900 – Starting Kitchen Printer Order NumberWhen using a kitchen printer or requisition receipt, you can program the starting ordernumber that will appear on the requisition. When a Z1 financial report is taken, therequisition number will reset and begin again at the number set here.Programming the Starting KP Order Number1. Turn the control lock to the PGM position.2. To begin the program, enter 1 9 0 0, press the SUBTL key.19 0 0 SUBTL3. Enter the starting number (up to 4 digits); press the X/TIME key.X/TIME4. Press the CASH key to finalize the program.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 201