SAM4s ER-900 series Operators Manual.pdf

Program 711 - Macro Name ProgrammingUp to ten function locations may be designated as Macro keys. You may wish to program aname for a macro. For example if a macro executes a series of commands to produce dailyreports, you can program the descriptor “DAILY”, so the macro can easily be identified.Macro names can also be helpful when looking at keyboard layout information with the PCcommunication utility.1. Turn the control lock to the PGM position.2. To begin the program, enter 7 1 1, press the SUBTL key.7 1 1 SUBTL3. Enter the number of the Macro you wish to program (1-10); press the X/TIMEkey.X/TIME4. If you are programming using an alpha keyboard overlay, type up to 18descriptors on the overlay and press the SUBTL key. (Note: As you are enteringdescriptors only the last 16 descriptors will display.)Type up to 18descriptor keysSUBTLIf you are programming using descriptor codes, enter up to 18 three-charactercodes and press the X/TIME key. (See “Descriptor Code Chart” on page 133.)Enter up to 18 threecharactercodesSUBTL5. Press the CASH key to finalize the program.CASH194 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3