SAM4s ER-900 series Operators Manual.pdf

Program 710 - Clerk Report Descriptor ProgrammingThe Clerk Report selection allows you to reprogram the descriptors that appear with the ClerkReport totals and counters. For example, the first total on the clerk report "NET SALES"might be re-labeled to say "GROSS SALES". You can reprogram any of the Clerk Reporttotals listed here with any 18-character descriptor.1. Turn the control lock to the PGM position.2. To begin the program, enter 7 1 0, press the SUBTL key.7 1 0 SUBTL3. Refer to the chart on the next page and enter the number that represents the lineyou wish to program; press the X/TIME key.XXX/TIME4. If you are programming using an alpha keyboard overlay, type up to 18descriptors on the overlay and press the SUBTL key. (Note: As you are enteringdescriptors only the last 16 descriptors will display.)Type up to 18descriptor keysSUBTLIf you are programming using descriptor codes, enter up to 18 three-charactercodes and press the SUBTL key.Enter up to 18 threecharactercodesSUBTL5. Press the CASH key to finalize the program.CASH192 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3