SAM4s ER-900 series Operators Manual.pdf

Program 701 - Financial Report Descriptor ProgrammingThe Financial Report selection allows you to reprogram the descriptors that appear with theFinancial Report totals and counters. For example, the first total on the financial report"+PLU TTL" represents the total of all positive PLU entries. You might wish to re-label thistotal to say "FOOD SALES". You can reprogram any of the Financial Report totals listedhere with any 18-character descriptor.1. Turn the control lock to the PGM position.2. To begin the program, enter 7 0 1, press the SUBTL key.7 0 1 SUBTL3. Refer to the chart on the next page and enter the number that represents the lineyou wish to program; press the X/TIME key.XXX/TIME4. If you are programming using an alpha keyboard overlay, type up to 18descriptors on the overlay and press the SUBTL key. (Note: As you are enteringdescriptors only the last 16 descriptors will display.)Type up to 18SUBTLdescriptor keysIf you are programming using descriptor codes, enter up to 18 three-charactercodes and press the SUBTL key.Enter up to 18 threecharactercodesSUBTL5. Press the CASH key to finalize the program.CASH190 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3