SAM4s ER-900 series Operators Manual.pdf

Program 700 – Logo/Endorsement Message ProgrammingProgramming the Receipt/Check Endorsement MessageA preamble message of up to six lines can be printed at the top of each receipt; a postamblemessage of up to six lines can be printed at the bottom of each receipt, and an endorsementmessage of up to ten lines can be printed when a check is endorsed on an optional slip printer.Each line can consist of up to 32 characters.1. Turn the control lock to the PGM position.2. To begin the program, enter 7 0 0, press the SUBTL key.7 0 0 SUBTL3. Refer to the chart below and enter the number that represents the line you wish toprogram; press the X/TIME key.XXX/TIMEX Message Line X Message Line1 1 st line of Preamble 12 6 th line of Postamble2 2 nd line of Preamble 13 1 st line of Endorsement3 3 rd line of Preamble 14 2 nd line of Endorsement4 4 th line of Preamble 15 3 rd line of Endorsement5 5 th line of Preamble 16 4 th line of Endorsement6 6 th line of Preamble 17 5 th line of Endorsement7 1 st line of Postamble 18 6 th line of Endorsement8 2 nd line of Postamble 19 7 th line of Endorsement9 3 rd line of Postamble 20 8 th line of Endorsement10 4 th line of Postamble 21 9 th line of Endorsement11 5 th line of Postamble 22 10 th line of Endorsement4. If you are programming using an alpha keyboard overlay, type up to 32descriptors on the overlay and press the SUBTL key. (Note: As you are enteringdescriptors only the last 16 descriptors will display.)Type up to 32SUBTLdescriptor keysIf you are programming using descriptor codes, enter up to 32 three-charactercodes and press the SUBTL key.Enter up to 32 threecharactercodesSUBTL5. Press the CASH key to finalize the program.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 189