SAM4s ER-900 series Operators Manual.pdf

Program 810 - Clerk Descriptor ProgrammingProgram descriptors by typing descriptors on the alpha keyboard overlay or byentering three digit alpha character codes. To enter descriptors by three digit alphacharacter codes you must set system option #31 (See “System Option Programming” onpage 137).1. Turn the control lock to the PGM position.2. To begin the program, enter 8 1 0, press the SUBTL key.8 1 0 SUBTL3. Enter the number (1-99) of the clerk you wish to program; press the X/TIMEkey.X/TIME4. If you are programming using an alpha keyboard overlay, type up to 18descriptors on the overlay and press the SUBTL key. (Note: As you are enteringdescriptors only the last 16 descriptors will display.)Type up to 18descriptor keysSUBTLIf you are programming using descriptor codes, enter up to 18 three-charactercodes and press the SUBTL key.Enter up to 18 threecharactercodesSUBTL5. Press the CASH key to finalize the program.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 185