SAM4s ER-900 series Operators Manual.pdf

Clerk ProgrammingClerks (which may be used as cashiers), have the following programming options. Theseoptions are set through separate programs:Program 800 - Secret Code programming determines the code that is used for clerksign on if a code entry sign on method is selected in system option #2 (See "SystemOption Programming" on page 137.) Program 801 - If a second cash drawer is installed, Drawer Assignment determineswhich cash drawer will be opened for each. Program 810 - Clerk Descriptor Programming allows you to set a unique, up to 18character, descriptor for each clerkBefore attempting any programming, all clerks must first be signed off in REG mode.Program 800 - Secret Code Programming1. Turn the control lock to the PGM position.2. To begin the program, enter 8 0 0, press the SUBTL key.8 0 0 SUBTL3. Enter the number (1-99) of the clerk you wish to program; press the X/TIMEkey.X/TIME4. Enter a secret code (up to 6 digits); press the SUBTL key.Enter the secretcode, up to 6 SUBTLdigits5. Repeat from step 3 for each clerk you wish to program. Press the CASH key tofinalize the program.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 183