SAM4s ER-900 series Operators Manual.pdf

Program 80 - Function Key DescriptorProgram descriptors by typing descriptors on the alpha keyboard overlay or byentering three digit alpha character codes. To enter descriptors by three digit alphacharacter codes you must set system option #31 (See “System Option Programming” onpage 137).Note: You can program descriptors up to 18 characters, however only the first 10 willappear on the display.1. Turn the control lock to the PGM position.2. To begin the program, enter 8 0, press the SUBTL key.80 SUBTL3. If you are programming using an alpha keyboard overlay, type up to 18descriptors on the overlay, press the X/TIME key and then press the function keyyou are programming. (Note: As you are entering descriptors only the last 16descriptors will display.)Type up to 18descriptor keysX/TIMEFUNCTIONKEYIf you are programming using descriptor codes, enter up to 18 three-charactercodes and press the function key you are programming key. (See “DescriptorCode Chart” on page 133.)Enter up to 18 threecharactercodesFUNCTIONKEY4. To program additional function keys, repeat from step 3, or press the CASH keyto finalize the program.CASHDescriptor Programs for the #/No Sale Key - Programs 80 & 81Since two distinct functions, # entry and no sale, reside on the same key, different programsare used to program each descriptor.To program the no sale descriptor: Repeat for another function key80SUBTLEnter up to 18 descriptor codes, ortype 18 alpha overlay descriptorsFUNCTIONKEYCASHTo program the # descriptor:Repeat for another function key81SUBTLEnter up to 18 descriptor codes, ortype 18 alpha overlay descriptorsFUNCTIONKEYCASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 153