SAM4s ER-900 series Operators Manual.pdf

Print Option ProgrammingRefer to the “Print Option Table” to review the print options. Read each option carefully todetermine if you wish to make any changes.NOTE: Typical selections are set as default. After clearing memory all options settingsare automatically set to the default setting, therefore there is no need to program unlessyou are setting an option other than the default.Programming a Print Option1. Turn the control lock to the PGM position.2. Enter 4 0, press the SUBTL key.3. Enter a print option address and press the X/TIME key.4. Enter the number representing the status you have selected, or if there is morethan one decision to be made in an address, add the values representing yourchoices for each decision and enter the sum. Press the SUBTL key.5. Repeat from step 3 for each print option you wish to change.6. Press the CASH key to end print option programming.Print Option FlowchartRepeat for each PrintOption40SUBTLX/TIME SUBTL CASHOption #StatusSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 145