SAM4s ER-900 series Operators Manual.pdf

# Option Description26 Table Management, orClerk Interrupt29 Modifier is:Pop-up after item?Pop-up after sale?Stay-down?Clerk Interrupt allows you to temporarilysuspend an incomplete transaction bysigning on a new clerk. The new clerkcan begin a new transaction with the firsttransaction temporarily suspended. Theoriginal transaction can be recalled forcompletion by signing on the originalclerk. You cannot use check/tabletracking or charge posting when the clerkinterrupt system is implemented.Using the clerk interrupt feature requiresallocation of at least 2 guest checks andsufficient soft check lines to support theinterrupted transaction (i.e. if 20 softcheck lines are allocated, a transactionwith up to 20 lines can be interrupted.)A MODIFIER key alters the next PLUregistered, either by changing the codenumber of the PLU so that a differentitem is registered, or by adding themodifier descriptor and not changing thecode of the subsequent PLU. If youpress a modifier key, you have the optionof the modifier applying only to the nextitem (0), having the same modifier applyto any subsequent item registered in thesame transaction (1), or having the samemodifier apply to any subsequent item onany subsequent transaction (2).30 Store Name This is an 8-character alpha/numericfield. Entry is made by alpha overlay ordescriptor code, depending upon themethod selected. You must set a storename when using an SD card tosave/load programs or reports. The nameset here must match the name of thefolder on the SD card, for example:SD:/ER900/PGMBACK/NAME forprogram files orSD:/ER900/RPTBACK/NAME forreport files. Report files can be viewedusing the optional PC Utility. Consultwith your SAM4s dealer for details.31 Program descriptors with overlay/ Defaults to Yes for flat keyboard models;No for raised key models.SAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 143