SAM4s ER-900 series Operators Manual.pdf

System Option ProgrammingRefer to the “System Option Table” to review the system options. Read each option carefullyto determine if you wish to make any changes.NOTE: Typical selections are set as default. After clearing memory all options settingsare automatically set to the default setting, therefore there is no need to program unlessyou are setting an option other than the default.Programming a System Option1. Turn the control lock to the PGM position.2. Enter 3 0, press the SUBTL key.3. Enter a system option address and press the X/TIME key.4. Enter the number representing the status you have selected, or if there is morethan one decision to be made in an address, add the values representing yourchoices for each decision and enter the sum. Press the SUBTL key.5. Repeat from step 3 for each system option you wish to change.6. Press the CASH key to end system option programming.System Option FlowchartRepeat for eachSystem Option30SUBTLX/TIMESUBTLCASHOption #StatusSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 137