SAM4s ER-900 series Operators Manual.pdf

Program 250 - PLU Stock Amount ProgrammingWith this program, you can you can add stock to the PLU sales counters for PLUs you havedesignated as stock PLUs. See "Program 100 - PLU Status Programming" to set option N5 toset stock status. The stock number set here can be the amount of stock that is being added tothe current level, or optionally, it can be the new total stock level. See option #18 in "SystemOption Programming" to set this option.1. Turn the control lock to the PGM position.2. To begin the program, enter 2 5 0, press the SUBTL key.2 5 0 SUBTL3. Select the PLU or PLUs you wish to program in one of the following ways: Press a PLU key on the keyboard or scan the item.PLUIf sequential PLUs are to receive the same status, press the first PLU key andthen press the last PLU key.PLUPLUEnter the number of the PLU (up to 15 digits) and press the PLU key.PLUEnter the number of the first PLU in a range of PLUs that are to receive thesame setting; press the PLU key. Enter the last number in the range; pressthe PLU key.PLUPLU4. Enter the stock amount you wish to add (up to six digits), press the X/TIME key.Stock AmountX/TIME5. To program additional PLUs, repeat from step 3, or press the CASH key tofinalize the program.CASH130 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3