SAM4s ER-900 series Operators Manual.pdf

Program 200 - PLU Price/HALO ProgrammingIf a PLU is open, set the HALO (high amount lock out) here. If a PLU is preset set the presetprice here. If a PLU is set with gallonage status, enter the price per gallon here. (Enter priceper gallon in tenths of a penny, i.e. 1299 for $1.29 9/10 per gallon.)1. Turn the control lock to the PGM position.2. To begin the program, enter 2 0 0, press the SUBTL key.2 0 0 SUBTL3. Select the PLU or PLUs you wish to program in one of the following ways: Press a PLU key on the keyboard or scan the item.PLUIf sequential PLUs are to receive the same status, press the first PLU key andthen press the last PLU key.PLUPLUEnter the number of the PLU (up to 15 digits) and press the PLU key.PLUEnter the number of the first PLU in a range of PLUs that are to receive thesame setting; press the PLU key. Enter the last number in the range; pressthe PLU key.PLUPLU4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter apreset price. (The maximum preset price you can enter is $50,000.00.)Price/HALOX/TIME5. To program additional PLUs, repeat from step 3, or press the CASH key tofinalize the program.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 129