SAM4s ER-900 series Operators Manual.pdf

Program 150 - PLU Group AssignmentEach PLU may report to any three of 99 groups. Group totals appear on reports, so that youcan track sales of different types of items. A group can also be used to designate items thatare to print on an optional kitchen printer. The first of the three groups to which a PLUcan be assigned determines kitchen printer routing.Note: The PLU will report to group "1", if not programmed to report to another group.1. Turn the control lock to the PGM position.2. To begin the program, enter 1 5 0, press the SUBTL key.1 5 0 SUBTL3. Select the PLU or PLUs you wish to program in one of the following ways:Press a PLU key on the keyboard or scan the item.PLUIf sequential PLUs are to receive the same status, press the first PLU key andthen press the last PLU key.PLUPLUEnter the number of the PLU (up to 15 digits) and press the PLU key.PLUEnter the number of the first PLU in a range of PLUs that are to receive thesame setting; press the PLU key. Enter the last number in the range; pressthe PLU key.PLUPLU4. Enter up to three 2-digit numbers representing the groups where you wish to addthe PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four. Press theX/TIME key.X/TIME1 st Group 2 nd Group 3 rd Group5. To program additional PLUs, repeat from step 3, or press the CASH key tofinalize the program.CASH128 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3