SAM4s ER-900 series Operators Manual.pdf

Program 110 - PLU Auto Tare ProgrammingNote: Tare #5 can be used for open tare entries.1. Turn the control lock to the PGM position.2. To begin the program, enter 1 1 0, press the SUBTL key.1 1 0 SUBTL3. Select the PLU or PLUs you wish to program in one of the following ways: Press a PLU key on the keyboard or scan the item.PLUIf sequential PLUs are to receive the same status, press the first PLU key andthen press the last PLU key.PLUPLUEnter the number of the PLU (up to 15 digits) and press the PLU key.PLUEnter the number of the first PLU in a range of PLUs that are to receive thesame setting; press the PLU key. Enter the last number in the range; pressthe PLU key.PLUPLU4. Enter a value (1-5) to indicate the number of the preprogrammed tare weight youwant to automatically subtract when the PLU is used for scale entry (using anoptional scale), and then press the X/TIME key. Enter 0 to disable automatic taresubtraction.X/TIME5. To program additional PLUs, repeat from step 3, or press the CASH key tofinalize the program.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 127