SAM4s ER-900 series Operators Manual.pdf

Program 100 - PLU Status Programming1. Turn the control lock to the PGM position.2. To begin the program, enter 1 0 0, press the SUBTL key.1 0 0 SUBTL3. Select the PLU or PLUs you wish to program in one of the following ways: Press a PLU key on the keyboard or scan the item.PLUIf sequential PLUs are to receive the same status, press the first PLU key andthen press the last PLU key.PLUPLUEnter the number of the PLU (up to 15 digits) and press the PLU key.PLUEnter the number of the first PLU in a range of PLUs that are to receive thesame setting; press the PLU key. Enter the last number in the range; pressthe PLU key.PLUPLU4. Refer to the "PLU Status Chart" to determine the values for N1 through N9. (Ifan address offers more than one option, add the values for each option and enterthe sum. For example, if you wish the PLU to be taxable by rates 2 and 4, addthe values for your choices, 1 + 4, and enter the sum "5" for address N2.) Enterthe values you have selected, press the X/TIME key. (You do not need to enterpreceding zeros. For example, if you are only selecting a value for N9, justenter that value.)N1 N2 N3 N4 N5 N6 N7 N8 N9 X/TIME5. To program additional PLUs, repeat from step 3, or press the CASH key tofinalize the program.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 123