SAM4s ER-900 series Operators Manual.pdf

P-Mode ProgrammingDefault ProgramThe ER-900 arrives with a default or generic program already installed. Program options areset to 0 (Zero), unless otherwise noted, which means the machine can be operatedimmediately after a RAM clear procedure is performed.For example:All keyboard PLUs are nontaxable and open, without entry limits by default statusprogramming of "000000000".All system options are set to 0 in default programming, unless otherwise noted.Change only the options that will deviate from default programming. There is noneed to re-enter an option status of 0, since 0 is its original setting.All programming (unless otherwise noted) is done with the control lock in the PGM position.Each section details a specific area of register programming.SAM4s ER-900 Series Operator's & Programming Manual v.1.3 P-Mode Programming • 117