SAM4s ER-900 series Operators Manual.pdf

locations, the upper-right and lower-right keys on the keyboard.)5. While continuing to hold the CASH and CLERK keys, turn the powerswitch to the ON position. (The display will illuminate and the error tonewill sound beep-beep-beep in quick succession.) Release the keys.6. At the PC, execute the program “Download.exe”. The Download dialog boxdisplays.7. Select the appropriate com port connection at your PC at the PORT# optionbuttons.8. Click SEL. find the folder where the update files are located and selectNEWNET.bin.9. Select Program code + font in the Select One option buttons.10. Press OK Button. The download takes about minutes; the scroll bar willtrack the progress of the download.11. The message Completed displays. Click OK and the Download programwill close.12. The display will flash (Current program is being erased), after a few seconds,the display will continue to flash, but at a slower rate. This continues forabout 3 minutes while the new program is being loaded. When the load iscomplete, a rapid beep-beep-beep will be heard, and the display will flashrapidly. Turn the power switch to OFF, the program update is complete.13. Disconnect the PC cable.14. Perform a memory all clear on the ECR. The ECR is now ready to programor to load a previously saved end-user program.114 • S-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3