SAM4s ER-900 series Operators Manual.pdf

4. Load the Images by SD Card1. Insert the SD card in the register’s SD slot. Note: The SD slot is located in theprinter compartment of the ER-900. Remove the security screw to access the slot.2. Turn the control lock to the S position.3. To load the Preamble Image to the register from the SD card, enter 1 2 0, pressthe SUBTOTAL key.120 SUBTL4. To load the Postamble Image to the register from the SD card, enter 1 3 0, pressthe SUBTOTAL key.130 SUBTL5. Saving Images from an ER-900 to an SD Card1. Insert the SD card in the register’s SD slot. Note: The SD slot is located in theprinter compartment of the ER-900. Remove the security screw to access the slot.2. Turn the control lock to the S position.3. To save the Preamble Image from the register to the SD card, enter 1 2 1, pressthe SUBTOTAL key.121 SUBTL4. To save the Postamble Image from the register to the SD card, enter 1 3 1, pressthe SUBTOTAL key.131 SUBTL110 • S-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.3