SAM4s ER-900 series Operators Manual.pdf

Function Key Assignment ProgrammingFunction keys may be relocated, inactivated or changed with this program. For example, youmay wish to add functions, such as PREVIOUS BALANCE and SERVICE, which may notbe placed on the default keyboard. Or perhaps, you may wish to remove a function, such asCANCEL, for security reasons.Please note the following limitations:If you assign a duplicate of a function code, the duplicate will function exactly asthe original - you will not get separate totals and counters on reports for theduplicated key.You can reassign keys only in locations that are programmable. See "Keyboards"on page 17 to determine the key locations that are fixed and cannot be changed.To Assign a Function Key to a Location1. Turn the control lock to the S position.2. Enter 7 0 and press the SUBTL key.70 SUBTL3. Refer to “Function Key Codes” on page 102 to find the code for the key youwish to assign. Enter the code and press the location you wish to program.Repeat this step to assign another key.Key CodeKeyLocation4. Press the CASH key to finalize key assignment programming.CASHSAM4s ER-900 Series Operator's & Programming Manual v.1.3 S-Mode Programming • 101