Reflex - Coral Instal

ReflexomatPressurisation SystemsDiaphragm Expansion VesselsReflexomat with a compressor for systems up to 12 MWMake-up waterReflex FillsetReflex MV with ballvalveWMPressurisation SystemsRS control unitRG basic vesselRS 90/1 230 V / 50 Hzfrom RS 150/1 400 V, 50 HzConfigurable floating common errormessage + RS-485 (from RS 90/2)Expansion linePPISPressure maintenance, compensating for theexpansion volumeThe compressor and solenoid valve are actuated in such away that if pressure is maintained at approximately ± 0.1bar, the expansion water flowing in or out via expansionline P is compensated for in the basic vessel. Becausepressure is "stored" in the form of an air buffer in theexpansion vessel (basic vessel), the method of operationis very gentle. Reflexomats with 2 compressors workwith load-based, automatically alternating operation andautomatic malfunction switchover.LISWater make-upWater make-up in the event of system-based waterlosses is integrated into the Reflexomat controls. It isperformed based on the filling level in the basic vessel.The level measurement is carried out by evaluating theweight of the basic vessel. The solenoid valve for watermake-up and the Reflex Fillset with water meter andsystem separator can be ordered optionally. Water makeupis monitored by a leakage monitor and interrupted inthe event of any malfunctions. The signals of a contactwater meter can be evaluated (Reflex Fillset with contactwater meter). The Reflex Fillcontrol Auto make-up stationwith integrated pump is available for very high systempressures.29