100 mm

Visual signaling devicesFlashing light 5 JoulesPB 2005A beautiful classic fl ashing light for indoors and outdoors• high reliability and long service life due to full on-board electronics• large variety of mounting methods – cable entry at the sideor through the base of the housing• extremely safe and reliable• increased dispersion of light due to micro-prisms in the surfaceof the lens• capable of being integrated in any application thanks to thepyramid design• fl ash tube additionally secured by a steel clampr =11 mRange asper EN 54IP 55Protectionsystem+ 55 °C- 30 °COperatingtemperatureElectrical data AC PB 2005Rated voltage 230 V AC 127 V AC 110 V AC 48 V AC 42 V AC 24 V AC 12 V ACRated frequency 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 HzOperating range 185 V – 255 V 110 – 148 V 90 V – 135 V 40 V – 54 V 35 V – 50 V 20 V – 30 V 9 V – 15 VNominal current consumption 0.070 A 0.115 A 0.100 A 0.470 A 0.500 A 0.770 A 0.990 AElectrical data DC PB 2005Rated voltage 80 V DC 60 V DC 48 V DC 24 V DC 12 V DCOperating range 64 V – 96 V 50 V – 72 V 40 V – 60 V 18 V – 30 V 10 V – 15 VNominal current consumption 0.11 A 0.13 A 0.18 A 0.25 A 0.60 AMechanical data PB 2005Flash rate1 Hz = 60 fl ashes/min.Flash energy5 JoulesLight intensity (DIN 5037) clear lens 44 cdLens coloursclear, white, yellow, amber, red, green, blueOperating temperature - 30 °C ... + 55 °CStorage temperature - 40 °C ... + 70 °CRelative humidity 90 %Protection system according to EN 60529IP 55 (if mounted vertically/horizontally)Duty cycle 100 %Service life of the flash tube light emission still 70 % after 8,000,000 fl asheslenspolycarbonate (PC)Materialhousing ABS, light grey, similar to RAL 7035 (optionally graphite grey RAL 7024)base ABS, light grey, similar to RAL 7035 (optionally graphite grey RAL 7024)Cable entry M20 x 1.5, either at the side or underneathConnecting terminals screw terminals 1.5 mm 2WeightAC versionDC version275 g310 g52www.pfannenberg.com