100 mm

ELECTRO-TECHNOLOGY FOR INDUSTRYDimensionsEEx ’d’ versionEEx de version165151.5145164.5226.5239.56375637530 303 x 7 mm Ø mounting holesConnection diagramsAC versionDC versionOperationmode selectionConnectingterminalsOperationmode selectionControlstage S2 and S3Controlstage S2 and S3Ordering detailsArticle numbersBExBG L1DLens colour Rated voltage 230 V ACamber 311 51 10 4 000Article numbers for other colours and voltages on requestOptions / accessoriesVisualEx signaling devicesGOSTManufacturer’s declarationWe hereby declare that the explosion-protected LED light with the type designationBExBG L1D ATEXhas been developed and manufactured in accordance with section 5.1.2 of EN 50014.This declaration is based on compliance with the following regulations and standards:94/9/EGCE conformityEN 50014 Electrical equipment for areas at risk of explosions – General requirementsEN 50018 Pressure-resistant encapsulation ‘d’EN 50019 Enhanced safety ‘e’EN 50281-1-1 Electrical equipment for use in areas with combustible dustEN 60529 Types of protection by enclosure (IP code)89/336/EWG ‘Electromagnetic compatibility’The BExBG L1D ATEX LED light is approved for use in potentially explosive areas in Zones 1, 2, 21 and 22 as per 94/9/EU.Further technical information can be found on our website at www.pfannenberg.com215